This is a FRONT Inner Wheel Seal for 1939-1949 Chevrolet & GMC Utility trucks. This seal is a felt wheel seal with metal casing. Hole in center is 2-7/64" ID with 3.192" OD. The seal has four metal tabs on one side. This is a LIMITED SUPPLY New Old Replacement Stock (NORS) item. Availability is subject to stock on hand. Replaces GM# 3650735, National 5991, Victor 49389, Standard 43-877 Specific Applications: 1939 COE Truck; 1940-1942 1-1/2 Ton & 2 Ton Utility; 1946-1949 SBC, 2 Ton (1st Design)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Trucks
This is a FRONT Inner Wheel Seal for 1963-1981 Chevrolet & GMC 3/4 & 1 Ton Trucks. This seal is a neoprene replacement for the front wheel seal. Dimensions: Outside Diameter 3.005" (76.330mm); Inside Diameter 2.180" (55.370mm), Width 0.495" (12.57mm) Replaces GM# 3857731 Specific Applications: 1963-1969 Series 20-30 (exc. D-D, 4WD); 1968-1969 Series 20-30 (D-D); 1970 Series 10 w/H.D. Front Brakes; 1970 Series 20-30 (Conv., D-D) G-20-30; 1972-1972 G-20 w/Disc Brake; 1971-1972 G-30; 1971-1972 Ser. 20-30 (Conv., D-D); 1973-1981 G-3; 1973-1981 CP-2, #, M.H.C.
This is a FRONT Wheel Seal for 1960-1961 Chevrolet & GMC 1/2 Ton Trucks (exc. 4WD, D-D). Dimensions: Outside Diameter 2.968" (75.390mm); Inside Diameter 2.000" (50.800mm); Width 0.500" (12.70mm). Replaces GM# 3766493
This is a FRONT Inner Wheel Seal for 1960-1972 Chevrolet & GMC 1/2 Ton 4WD Trucks, including Blazer. This seal is a replacement neoprene seal for the original felt front wheel seal. Dimensions: Outside Diameter 3.256" (82.700mm); Inside Diameter 2.500" (63.500mm), Width 0.312" (7.920mm) Replaces GM# 6273948 Specific Applications: 1960-1972 Chevrolet & GMC 1/2 Ton 4WD Trucks, including Blazer & Jimmy
This is a FRONT Inner Wheel Seal for 1941-1959 Chevrolet & GMC cars & trucks. This seal is a correct felt seal as original for the front wheel seal. Dimensions: Outside Diameter 2.969" (75.410mm); Inside Diameter 1.875" (47.630mm), Thickness .025" (6.350mm) Replaces GM# 3656536, National 6064 Specific Applications: 1941-1942 All Passenger & Truck; 1946-1954 All Passenger; 1946-1959 All 1/2 Ton Truck
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This is a Front Wheel Seal for 1935-1959 Chevrolet & GMC large trucks. Dimensions: 2.04" ID, 3.16" OD. Replaces GM# 379654 Specific Applications: 1935-1942 1-1/2 Ton Utility (exc. COE, H.D., MT, MY); 1946-1955 1-1/2 Ton Utility (exc. UJ, UK, VJ, VK, SBC, H.D.); 1946-1959 3/4 ton & 1 ton (exc. H.D.); 1960-1966 D-D (exc. 102" WB)
This is a Modified Front Wheel Seal designed for our Tapered Roller Bearing kits FS-178K & FS-216K. Dimensions: Thickness - .368"; OD - 3.130". Hub lip OD 2.975"
This is a FRONT inner wheel seal for 1916-1940 Chevrolet & GMC cars & trucks. This seal is a felt or neoprene replacement seal. Dimensions: 1.77" ID, 2.97" OD. Replaces GM# 335448, 352488, National 5070 Specific Applications: 1923-1930 All Passenger & Truck; 1931-40 Passenger and Commercial (exc Utility or 1933-1936 Standard Passenger)
For 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
This is a FRONT inner wheel seal for 1931-1935 Chevrolet & GMC 1-1/2 & 2 Ton Trucks. This seal is a NORS replacement for the original felt wheel seal. Dimensions: ID = 1.97 (50mm); OD = 3.16 (80mm) Replaces GM# 365277, Victor 49002, National 5246 Limited Supply. Specific Applications: 1931-1935 Chevrolet & GMC 1-1/2 & 2 Ton Trucks - Series: LT, M, N, O, P, Q. In 1935, fits early production trucks through Feb. 1, 1935.
See also FS-178K, FS-216K or FS-66K for tapered roller bearing kit to replace all four inner and outer ball bearings with tapered roller type bearings. Bearing ID is .75" and OD is 2.08", Thick - 0.67"
This is a complete INNER Front Ball Bearing assembly for all 1925-1940 Chevrolet & GMC cars & trucks (Exc 1933-1936 Standard & 1931-1940 Utility trucks). Dimensions: OD 2.961"; ID inner race 1.179". Replaces GM# 909502, 909602, 909702, 909002 See also FS-178K tapered roller bearing replacement kit.
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
This is a NORS wheel bearing - FRONT INNER for 1933-1936 Chevrolet Standard Models Only. Replaces GM # 909022, 909522, 909622, 909722 NOTE: This is a LIMITED SUPPLY item. Availability is subject to stock on hand.
This is a NORS wheel bearing - FRONT OUTER for 1933-1936 Chevrolet Standard Passenger Models Only. Dimensions: OD 1.873", ID .657". Replaces GM # 909021, 909521, 909621, 909721 NOTE: This is a LIMITED SUPPLY item. Availability is subject to stock on hand.
This bearing is for the rear axle on all 1932 Chevrolet passenger cars & 1/2 ton trucks. Two required per vehicle. Dimensions: OD - 3.151" (80.09 mm), ID - 1.571" (39.90 mm), Thick .712" (18.08 mm). Replaces GM# 901208, ND 1208.
This is an INNER TAPERED ROLLER FRONT wheel bearing 1925-1959 Chevrolet & GMC cars & trucks. This bearing replaces the original ball bearing type with tapered roller type bearing. Dimensions: OD 2.966" (75.33mm) x ID 1.281" (32.53mm). Replaces GM# 909052, 909552, 909602, 909702 Specific Applications: 1925-1940 All Passenger & Trucks (exc. 1931-1940 Utility or 1933-1936 Standard Passenger) - requires adapter - see notes below; 1941-1942 All Passenger & Trucks (exc. Utility); 1946-1954 All Passenge; 1946-1959 Chevy & GMC 1/2 Ton Trucks NOTE: To use this bearing on 1925-1940 passenger & 1/2 ton models (except 1933-35 Standard & Utility), you must also purchase and install FS-178RA bearing adapter.
This is a new REAR AXLE SHAFT Bearing for 1933-1963 Chevrolet & GMC cars & trucks. Dimensions: OD: 2.781" x ID: 1.878" x Thick: .885". Replaces GM# 111121, Hyatt OR1502 Specific Applications: 1933-1936: Passenger (exc. 1933-36 Standard models:CC,DC,EC,FC); 1933-1939: All Trucks (except Utility); 1940-1963 1/2 Ton trucks
This is a Differential Carrier Bearing and Inner Rear Wheel Bearing for 1946-1972 Chevrolet & GMC trucks. Bearing and Race together. Replaces GM #188930, Hyatt D11786, 11786Y Specific Applications: 1946-1967 3/4 & 1 TON (EXC. 11,000# AXLE); 1957-1959 Series 3E-3G with 4WD; 1968-1969 Series 20 (D-D, 4WD); 1968 Series 20 (exc. leaf springs, D-D, 4WD, 396; 1968-1969 Series 30; 1969 Series 20 (exc. D-D, 4WD, LPG, 396); 1971-1972 Series. 20-30, G-30 (EXC. 11,000# AXLE)
This is an OUTER REAR Wheel Bearing for 1946-1972 Chevrolet & GMC 3/4 & 1 Ton Trucks. Wheel Bearing and Race set. Dimensions: Cone Bore=2.0312", Cone Length=0.875", Cone Radius=0.078", Cup Outer Diam=3.5433, Cup Length=0.625", Cup Radius=0.078". Replaces GM# 188932, HY B11630, HY 11630Z Specific Applications: 1946-1966 3/4 & 1 TON (exc. 11,000# AXLE) - Series 20 & 30; 1967-1972 Series 20 & 30, G-30 (exc. 11,000# AXLE)
This is an INNER Tapered Roller Bearing for 1923-1940 Chevrolet passenger cars & 1/2 ton trucks, except 1933-36 Standard & Utility. Replaces GM# 909002, 909502, 909602, 909702. NOTE: Requires using FS-213M Wheel Seal.
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
This is the INNER Front Wheel Bearing assembly for 1960-1961 Chevrolet & GMC 3/4, 1 & 1-1/2 Ton trucks. Replaces GM# 90948 Specific Applcations: 1960-1961 Chevy & GMC 3/4 Ton, 1 Ton & 1-1/2 Ton Trucks (exc 4WD, DD) - Series 20, 30 & 40
This is a TAPERED ROLLER FRONT wheel bearing kit for 1941-1959 Chevrolet & GMC cars & trucks. This kit replaces the original ball bearing type with tapered roller type bearings. Kit includes: 2 INNER and 2 OUTER tapered roller bearings with 2 Front Wheel Seals, made especially for this installation. Dimensions: INNER Bearing - OD 2.966" (75.33mm) x ID 1.281" (32.53mm); OUTER Bearing - OD 2.080" (52.83mm) x ID .750" (19.05mm). Replaces GM# 909001, 909052, 909501, 909601, 909701, 909552, 909602, 909702 Specific Applications: 1941-1942 All Passenger & Trucks (exc. Utility); 1946-1954 All Passenger; 1946-1959 Chevy & GMC 1/2 Ton Trucks NOTE: Check your original bearing numbers BEFORE ordering!
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This is a tapered FRONT wheel bearing kit for 1923-1940 Chevrolet car & Chevy & GMC trucks. This kit replaces the original ball bearing type with tapered roller type bearings. Kit includes: 2 each INNER and 2 each OUTER tapered roller bearings with 2 each front wheel seals, made especially for this installation. Replaces GM# 909001, 909002, 909501, 909601, 909701, 909502, 909602, 909702 Specific Applications: 1923-1930: All Passenger & Trucks; 1931-1940: All (except 1933-36 Standard Passenger or Utility Truck) NOTE: 1937-1939 Canadian manufactured cars & trucks used different inner wheel bearings and we do not have bearings for that application. Most foreign export Chevrolets were made in Canada. Check your original bearing numbers and dimensions BEFORE ordering! Dimensions: INNER Bearing - OD 2.966" (75.33mm) x ID 1.1885" (30.18mm); OUTER Bearing - OD 2.080" (52.83mm) x ID .750" (19.05mm)
For 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
This sealer is a gray colored, paintable, fast drying, flexible sealer used to seal body seams. Use to seal small cracks and other openings, such as drip rails, molding, cowling and welded seams. The heavy consistency makes this sealer especially suitable for vertical seams. Used by professionals for a quality job. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
This paint is a correct color match to the Cream Medium color that was used on early 1930's Chevrolet wire wheels. It is an extremely close match to the Duco Dulux #202 referenced in the Chevrolet Duco Specifications.
For 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
This paint is a correct color match to the Cream Medium color that was used on early 1930's Chevrolet wire wheels. It is an extremely close match to the Duco Dulux #202 referenced in the Chevrolet Duco Specifications.
For 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
These are Chrome Front Fender Emblems for 1968-1972 CHEVROLET & GMC "4 WHEEL DRIVE” Emblems fit Chevy Blazer & Suburban, and GMC Jimmy. These emblems have black details with chrome background. GM Restoration Licensed item. Replaces GM# 3930955
This is a Rear Wheel Bolt Lock Plate for 1940-1947 Chevrolet & GMC Utility Trucks. Two required per vehicle. This is a NORS (New Old Replacement Stock) item - LIMITED SUPPLY, availability is subject to stock on hand. Replaces GM# 3653926 Specific Applications: 1940-1947 Utility Trucks; 1941-1946 Trucks with 2-Spped Differential
For 1940 1941 1942 1944 1945 1946 1947 Chevrolet Trucks
The CPP Disc Brake Wheel Kit for OEM Stock Spindles fits 1963-1970 Chevrolet 1/2 Ton, Model C10. It includes 11" vented rotors with a 5x4.75 bolt pattern. Designed for reliable stopping power. Easy installation on stock spindles. This conversion kit changes the 6-Lug drum brakes to the more commonly used 5 x 4.75 wheel pattern, while retaining stock spindles. Kit includes: 11" Vented Rotors, Calipers, Caliper Brackets, Bearings, Seals, Spindle Nuts, Dust Caps, Banjo Bolts and Brake Hoses. No master cylinder in this kit. This item is oversized and special freight costs will apply. Call or email us for a freight quote.
For 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
DOES NOT WORK WITH 1933-36 STANDARD MODELS. This disc brake conversion gives you all the parts needed to install disc brakes on 1929-1940 Chevrolet & GMC passenger cars & light trucks (exc. 1933-1936 Standard Passenger Cars). Use with your existing spindles. Top quality US made bolt-on assembly. Includes caliper mounting brackets - attaching hardware to spindle - bearing adaptors (which use modern tapered roller bearings) - 1970-77 Camaro calipers - rotors - pads - seals - bearings - and instructions. Changes to 5-Lug GM Pattern: 5 X 4-3/4" Please Note: This kit is very heavy and must be shipped in several boxes. Freight charges will be high. Call or email us for a freight quote. Also consider FS-715 Basic Disc Brake Kit for much cheaper shipping charges.
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
1924 (Late - Series F) thru 1926 (Early - Series K) Chevrolet passenger cars and light trucks. Dimensions: 11" OD x 1-27/32" Overall Height; Bore size 1.755" Diameter; Bolt Holes: 6 holes 25/64" diameter on 5-1/32" centers. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This brake drum is for 1916-1924 (Early - Series B) Chevrolet passenger cars & light trucks Dimensions: 10" OD x 1-1/2" Overall Height; Bore size 2.189" Diameter; Bolt Holes: 6 holes 25/64" diameter on 4-7/8" centers. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 Chevrolet Cars and Trucks
This is a new set of brake shoes (4 pieces for two wheels) that fit 1936-1952 Chevrolet cars & trucks. Shoes are 11" x 1-3/4". Replaces GM# 603872, 3681129. Specific Applications: 1936-1950 Passenger cars (exc. 1936 Std FC) - FRONT & REAR; 1936-1950 1/2 ton trucks - FRONT & REAR: 1937-1942 3/4 ton trucks (exc. 14" Brakes) - FRONT & REAR; 1937-1942 3/4 ton trucks (with 14" Brakes) - FRONT; 1937-1942 1 ton trucks - FRONT; 1946-1952 3/4 ton trucks (exc. Dubl-Duti D-D) - FRONT
For 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks
This is a sleeving service only. A kit is required in addition. Allow 2-3 weeks. Step-bore -add $20.00 Be sure to send the bare cylinder only! Labor charge for disassembly $40.00 per hour.
This is a new, complete REAR wheel cylinder assembly for 1955-1970 Chevrolet passenger cars and Chevy & GMC trucks. The bore size of this cylinder is 1" diameter and it fits left or right side (See Specific Applications below). Replaces GM# 5459918 Specific Applications: 1955-1958 Passenger - LEFT; 1955-1959 (2nd Series) 1/2 Ton Trucks (exc. Positraction) - LEFT; 1959-1964 Passenger - LEFT or RIGHT; 1960-1970 1/2 Ton Trucks - LEFT
For 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
This is a new, complete REAR wheel cylinder assembly for 1955-1970 Chevrolet passenger cars and Chevy & GMC trucks. The bore size of this cylinder is 1" diameter for RIGHT side (See Specific Applications below). Replaces GM# 5459917 Specific Applications: 1955-1958 Passenger - RIGHT; 1955-1959 (2nd Series) 1/2 Ton Trucks (exc. Positraction) - RIGHT; 1960-1970 1/2 Ton Trucks - RIGHT
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
This FRONT Brake Wheel cylinder assembly fits 1964-1970 Chevrolet & GMC 1/2 Ton, Series 10 trucks. Specify left or right when ordering. Bore Diameter 1-1/8”. Replaces GM# 5464560, 5464561 Specific Applications: 1964-1970 1/2 Ton Series 10 (exc. 4WD) - FRONT
For 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This FRONT Brake Wheel cylinder assembly fits 1964-1970 Chevrolet & GMC 1/2 Ton, Series 10 trucks. Specify left or right when ordering. Bore Diameter 1-1/8”. Replaces GM# 5464560, 5464561 Specific Applications: 1964-1970 1/2 Ton Series 10 (exc. 4WD) - FRONT
For 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This FRONT Brake Wheel cylinder assembly fits 1955-1963 Chevrolet passenger cars & Chevy & GMC trucks. Specify left or right when ordering. Bore Diameter 1-1/8”. Replaces GM# 5456944, 5456945, Casting# 5454525, 5454526 Specific Applications: 1955-1957 Passenger car - FRONT; 1959 Passenger - FRONT; 1960-1963 1/2 Ton Truck (exc. 4WD) - FRONT
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks
This FRONT Brake Wheel cylinder assembly fits 1955-1963 Chevrolet passenger cars & Chevy & GMC trucks. Specify left or right when ordering. Bore Diameter 1-1/8”. Replaces GM# 5456944, 5456945, Casting# 5454525, 5454526 Specific Applications: 1955-1957 Passenger car - FRONT; 1959 Passenger - FRONT; 1960-1963 1/2 Ton Truck (exc. 4WD) - FRONT
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Trucks
This FRONT Brake Wheel cylinder assembly fits Chevrolet passenger cars & Chevy & GMC trucks. Specify left or right when ordering. NOTE; CARS & 1/2 TON TRUCKS ARE REVERSED FROM EACH OTHER - ORDER BY LISTING BELOW. Bore Diameter 1-1/8”. Replaces GM# 5455479, 5453818, Casting# 5450822. Specific Applications: 1951-1954 Passenger car - LEFT FRONT; 1951-1959 1/2 Ton Truck (exc. 4/WD) - RIGHT FRONT;
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This FRONT Brake Wheel cylinder assembly fits Chevrolet passenger cars & Chevy & GMC trucks. Specify left or right when ordering. NOTE; CARS & 1/2 TON TRUCKS ARE REVERSED FROM EACH OTHER - ORDER BY LISTING BELOW. Bore Diameter 1-1/8”. Replaces GM# 5455478, 5453817, Casting# 5450821. Specific Applications: 1951-1954 Passenger car - RIGHT FRONT; 1951-1959 1/2 Ton Truck (exc. 4/WD) - LEFT FRONT
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This is a new, complete REAR wheel cylinder assembly for 1951-1955 Chevrolet passenger cars and Chevy & GMC trucks. The bore size of this cylinder is 1" diameter and it fits left or right side. Two required per vehicle. Replaces GM# 5453819, Casting # 5453820 Specific Applications: 1951-1954 Passenger; 1951-1955 (1st Series) 1/2 Ton Trucks
For 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This REAR Brake Wheel cylinder assembly fits 1964-1970 Chevrolet & GMC trucks. Specify left or right when ordering. For coil spring applications. Bore Diameter 1-1/8”. Replaces GM# 5457168, 5457169 Specific Applications: 1964-1966 3/4 Ton Truck Series 20 (exc. D-D, 4WD, Leaf Springs) - REAR; 1967 3/4 Ton Truck Series 20 (exc. D-D, 4WD) - REAR; 1968 Series 20 (D-D) - REAR; 1968-1969 3/4 Ton Truck Series 20 (exc. Leaf Springs, D-D, 4WD, LP Gas, 396) - REAR; 1970-1972 3/4 Ton Truck Series 20 (Conv, D-D) - REAR; 1972 3/4 Ton Series 20 (4WD)
For 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This REAR Brake Wheel cylinder assembly fits 1964-1970 Chevrolet & GMC trucks. Specify left or right when ordering. For coil spring applications. Bore Diameter 1-1/8”. Replaces GM# 5457168, 5457169 Specific Applications: 1964-1966 3/4 Ton Truck Series 20 (exc. D-D, 4WD, Leaf Springs) - REAR; 1967 3/4 Ton Truck Series 20 (exc. D-D, 4WD) - REAR; 1968 Series 20 (D-D) - REAR; 1968-1969 3/4 Ton Truck Series 20 (exc. Leaf Springs, D-D, 4WD, LP Gas, 396) - REAR; 1970-1972 3/4 Ton Truck Series 20 (Conv, D-D) - REAR; 1972 3/4 Ton Series 20 (4WD)
For 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This FRONT Brake Wheel cylinder assembly fits 1960-1970 Chevrolet & GMC trucks. Specify left or right when ordering. Bore Diameter 1-1/8”. Replaces GM# 5459221, 5459222 Specific Applications: 1960-1962 1 Ton Truck - FRONT; 1963-1970 3/4 & 1 Ton Truck - FRONT
For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This FRONT Brake Wheel cylinder assembly fits 1960-1970 Chevrolet & GMC trucks. Specify left or right when ordering. Bore Diameter 1-1/8”. Replaces GM# 5459221, 5459222 Specific Applications: 1960-1962 1 Ton Truck - FRONT; 1963-1970 3/4 & 1 Ton Truck - FRONT
For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This is a complete REAR wheel cylinder assembly for 1936-1950 Chevrolet & GMC cars & trucks (exc. 1936 Standard FC models). The bore size of this cylinder is 1-3/16" and it fits left or right side. It will work for 1936 Standard FC models as a replacement on the Front and Rear. The Standard wheel cylinder original bore size was 1-1/8". This replacement is 1-3/16" ID. Replaces GM# 5300866 Specific Applications: 1936-1948 Passenger cars; 1936-1950 1/2 Ton Trucks; 1936-1942 3/4 Ton Trucks
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars and Trucks
This is a FRONT Wheel Cylinder Assembly for 1936-1952 Chevrolet & GMC trucks & 1936 Passenger FD Models. Cylinder bore is 1-1/4" diameter. Replaces GM# 5300869, Casting# 1074903 Specific Applications: 1936 Passenger (FD Models-Master less Knee Action); 1936-1950 All Trucks; 1951-1952 3/4 Ton Trucks
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks
This is a new, complete FRONT & REAR wheel cylinder assembly for 1937-1952 Chevrolet & GMC 3/4 & 1 Ton trucks. The bore size of this cylinder is 1-3/8" diameter - fits left or right. Replaces GM# 5450071, Casting# 5450072 Specific Applications: 1937-1942 3/4 & 1 Ton Trucks with 14" Brakes - Models GE,HE,JE,KE,KF,AM,AN,BM,BN - REAR; 1946-1952 3/4 Ton - REAR; 1946-1952 1 Ton & Dubl-Duty - FRONT
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Trucks
This is a new, complete REAR wheel cylinder assembly for 1946-1952 Chevrolet & GMC 1 Ton trucks. The bore size of this cylinder is 1-3/8" diameter - fits left or right. Replaces GM# 5451615, Casting# 5450072 Specific Applications: 1946-1952 Chevy & GMC 1 Ton Trucks - REAR (exc. 14" Brakes)
For 1946 1947 1948 1949 1950 1951 1952 Chevrolet Trucks
This is an all new REAR wheel cylinder assembly for 1936-1950 Chevrolet & GMC 1-1/2 & 2 Ton Utility Trucks. The bore size is 1-1/2". Replaces GM# 5300885. Original casting number 5300892.
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Trucks
This is a FRONT & REAR brake wheel cylinder repair kit for 1951-1970 Chevrolet & GMC cars & trucks. Kit comes with two cups, two end boots and one spring. Bore size is 1-1/8". Wheel cylinder pistons are not included in this kit. Replaces GM# 5450969, 5455661 1951-1959 Passenger - FRONT; 1951-1970: 1/2 thru 1 Ton Truck - FRONT; 1953-1970: 3/4 Ton Truck - REAR (1-1/8" bore)
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
This is a REAR brake wheel cylinder repair kit for 1951-1970 Chevrolet & GMC cars & trucks. Kit comes with two cups, two end boots and one spring. Bore size is 1". Wheel cylinder pistons are not included in this kit. Replaces GM# 5450970, 5455660 1951-1967 Passenger - REAR; 1951-1970 1/2 Ton Truck - REAR; 1953 Utility Truck - FRONT
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
This is a FRONT brake wheel cylinder repair kit for 1936-1952 Chevrolet & GMC cars & trucks. Kit comes with two adjusters, two cups and one spring. Bore size is 1-1/4. Cylinder pistons are not included. Replaces GM# 5450431 Specific Applications: 1936-1948 All Passenger & Truck (exc. 1936 Standard FC); 1949-1950 All Truck (Exc. 1 Ton, D-D); 1951-1952 3/4 Ton Truck (exc. D-D)
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks
This is a REAR brake wheel cylinder repair kit for 1936-1950 Chevrolet & GMC cars & trucks. Kit comes with two adjusters, two cups and one spring. Bore size is 1-3/16. Wheel cylinder pistons are not included in this kit. Replaces GM# 5450429 Specific Applications: 1936-1948 All Passenger (exc. 1936 Standard FC); 1936-1950 1/2 Ton Truck; 1936-1945 3/4 Ton Truck - Models with 11" brakes - GD, HD, JD, KD, AL, BL
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars and Trucks
This wheel cylinder kit will fit 1937-1952 Chevrolet & GMC 3/4 & 1 Ton Trucks. Kit includes two pistons, two cups and one spring. Bore diameter 1-3/8". Replaces GM# 5450434 Specific Applications: 1937-1942 3/4 & 1 Ton Trucks - Models GE HE JE KE KF AM AN BM BN - REAR; 1946-1952 3/4 ton & 1 Ton - REAR; 1946-1952 1 ton (exc. D-D) - FRONT; 1951-1952 1-1/2 Ton & 2 Ton - FRONT
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Trucks
This REAR Brake Wheel cylinder repair kit fits 1936-1950 Chevrolet & GMC 1-1/2 & 2 Ton Utility Trucks. Kit includes two pistons, two cups and one spring. Bore Diameter 1-1/2”. Replaces GM# 5450435 Specific Applications: 1936-1950 Utility Trucks - 1-1/2 & 2 Ton - REAR
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Trucks
This rear wheel trim molding fits all 1973-1987 Chevrolet pickups. Also fits 1988-1991 Crew Cabs (exc. dual rear wheels). Specify Right or Left when ordering. Replaces GM# 6273599 & 6273600
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This rear wheel trim molding fits all 1973-1987 Chevrolet pickups. Also fits 1988-1991 Crew Cabs (exc. dual rear wheels). Specify Right or Left when ordering. Replaces GM# 6273599 & 6273600
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This front RIGHT wheel trim molding fits all 1981-1987 Chevrolet pickups. Also fits 1988-1989 Crew Cabs. Specify Right or Left when ordering. Replaces GM# 14022805, 14022806
For 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This front LEFT wheel trim molding fits all 1981-1987 Chevrolet pickups. Also fits 1988-1989 Crew Cabs. Specify Right or Left when ordering. Replaces GM# 14022805, 14022806
For 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This upper wheel arch opening repair panel is for Chevrolet & GMC pickups, Blazer, Jimmy & Suburban. Specify Right or Left when ordering. Dimensions: 43 x 14 x 4" Specific Applications: 1973-1987 Chevrolet & GMC Pickups C&K 1, 2, 3; 1973-1991 Blazer & Jimmy; 1973-1991 Suburban This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This upper wheel arch opening repair panel is for Chevrolet & GMC pickups, Blazer, Jimmy & Suburban. Specify Right or Left when ordering. Dimensions: 43 x 14 x 4" Specific Applications: 1973-1987 Chevrolet & GMC Pickups C&K 1, 2, 3; 1973-1991 Blazer & Jimmy; 1973-1991 Suburban This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
One Person System Takes The Work Out of Brake Bleeding. Bleeding your brake or clutch line has never been easier or simpler! Revolutionary double-patented Speed Bleeder replaces the original bleeder valve in your caliper/wheel cylinder with a spring-loaded one-way ball and check valve design. This unique design opens to allow the old fluid and air out, then closes automatically between pumps to prevent the old fluid and air from re-entering the line. It's a real time saver! For 3/8-24 threads.
This is the rod that fits into the end of the wheel cylinder to the brake shoe. Fits all 1951-1970 Chevrolet & GMC cars & trucks with Bendix brakes. Will work with both front or rear wheel cylinders. Two required per wheel cylinder. Replaces GM#'s 509233, 3694701
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
This bolt is for REAR wheel cylinder mounting on 1936-1964 Chevrolet cars & Chevy & GMC trucks. It is the original style securing hollow bolt that transfers brake fluid from line to rear wheel cylinder. Two required per vehicle. Sold with two copper sealing washers. Dimensions: 7/16-20 x 1-11/32" Overall Length. Replaces GM# 476099 Specific Applications: 1936-1954 All Pass & Truck; 1955-1962 3/4 Ton & 1 Ton Truck - Series 20 & 30; 1963-1964 3/4 Ton Truck - Series 20
This REAR wheel cylinder mounting block fits 1951-1954 Chevrolet passenger cars & 1951-1955 (1st Series) Chevy & GMC trucks. The brass block fits between the rear wheel cylinder and the 3/8"-24 axle brake line. Use with the original hollow mounting bolt that transfers brake fluid from the line to the wheel cylinder. Two per vehicle. Replaces GM#3696553 Specific Applications: 1951-1954 Chevrolet passenger cars; 1951-1955 (1st Series) Chevy & GMC 1/2 ton trucks
For 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This REAR wheel cylinder mounting block fits 1936-1964 Chevrolet & GMC cars & trucks. The brass block fits between the rear wheel cylinder and the 1/4" axle brake line. Use with the original hollow mounting bolt that transfers brake fluid from the line to the wheel cylinder. Two per vehicle. Replaces GM# 476100 Specific Applications: 1936-50 All Passenger & Truck; 1951-55(1st Series) All Trucks (except 1/2 Ton); 1955-63(2nd Series) 3/4 & 1 Ton Trucks; 1964 3/4 Ton Trucks (exc. 4WD, D-D)
1959-1990 Chevrolet & GMC cars & trucks Without Air Conditioning. This is a Heater Blower Motor Fan Wheel, sometimes called a "squirrel cage". This replacement unit replaces most GM fan wheels. Check dimensions to compare to your original: OD 5-1/4", Height 2-7/16", Hub recess 7/8", Shaft size 1/4"
This horn parts kit includes the spring, insulators, connector spring and mounting screws for 1958-1966 Chevrolet Passenger vehicles and Chevrolet/GMC trucks. May require some modification to fit some steering wheels. Specific Applications: 1958-1960 Chevrolet Passenger Vehicles 1960-1966 Chevrolet an GMC Trucks
This horn contact plate is used on all 1947-1953 Chevrolet & GMC trucks. It is held in place with the steering shaft nut. The fingers of this piece hold the horn button in place with snap-in action. Replaces GM# 758239
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet/GMC Trucks
This horn contact plate is used on 1953-1959 Chevrolet & GMC cars & trucks. It is held in place with the steering shaft nut. The fingers of this piece hold the horn button in place with snap-in action. Dimensions: 2-1/2" OD, Center Hub ID 9/16". Replaces GM# 758566 Specific Applications: 1953-1954 Passenger - 150 Series, including Sedan Delivery; 1954-1959 Trucks
For 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
1960-66 Chevrolet & GMC Truck (Standard Wheel), 1967-68 Chevrolet & GMC Truck Horn Cap Retainer Kit -Complete with Horn Contact Bushing- Kit. This horn parts kit includes the spring, insulators, connector spring, horn contact bushings, mounting screws and retainer.
This is a Rubber Horn Blowing Button for 1929-1940 Chevrolet & GMC cars & trucks. Part of GM# 753838 assembly. This item is Made in the USA by Steele Rubber, Inc. See also SA-174 for complete horn button, metal cap & wire assembly (imported). Specific Applications: 1929-1937 Passenger (1937 GB Series) & Truck; 1938-1940 Commercial & Utility - Models HC, HD, HE, T, JC, JD, JE, VA, VB, VC, VD, KC, KD, KE, KF, WA, WB, WC
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
This is a Hubcap to Wheel Retaining Clip - spring steel (on wheel center). These are for original wheels where the hubcap does not have clips. It is designed to hold the hubcap by spring pressure against the lip of the hubcap to the wheel center. Up to 6 clips required. 1/2" wide with hole for attaching rivet.
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This is a polished stainless steel hubcap for 1941-1948 Chevrolet cars & 1941-1946 Chevy 1/2 & 3/4 Ton Trucks. Each hub cap is brightly polished and has the proper painted details as original. This hubcap is designed for original wheels that have six spring clips on each wheel center. Dimensions: 7-5/8" ID x 9-7/8" OD. Replaces GM# 3658374 Specific Applications: 1941-1948 All Passenger; 1941-1946 Chevrolet Trucks - All Commercial (exc. DR, DS)
For 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
