Filters
Narrow results by department:
Cowl Vent Hardware
Door Hardware
CHEVROLET 1947-1955 TRUCK DOOR HINGE BOLT & WASHER
This bolt & star washer fits all 1947-1955 Chevy & GMC trucks for the door hinges. Note: in 1955, used on 1st Series ONLY. Dimensions 3/8"-24 x 7/8". Replaces GM# 3685462, 4092154
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
CHEVROLET 1947-55 PU DOOR HINGE ACCESS PLATE SCREW SET
This Screw Set is for the Door Hinge Access Plates on 1947-1955 (1st Series) Chevrolet & GMC trucks. This 10 piece set is enough for both access plates.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
1947-55 PU UPPER DOOR HINGE FACEPLATE - LEFT
These metal face plates fit on the UPPER door hinge for 1947-1955 (1st Series) Chevrolet & GMC trucks. Specify Right or Left when ordering.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Trucks
1947-55 PU UPPER DOOR HINGE FACEPLATE - RIGHT
These metal face plates fit on the UPPER door hinge for 1947-1955 (1st Series) Chevrolet & GMC trucks. Specify Right or Left when ordering.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Trucks
1947-55 PU LOWER DOOR HINGE FACEPLATE - LEFT
These metal face plates fit on the LOWER door hinge for 1947-1955 (1st Series) Chevrolet & GMC trucks. Specify Right or Left when ordering.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Trucks
1947-55 PU LOWER DOOR HINGE FACEPLATE - RIGHT
These metal face plates fit on the LOWER door hinge for 1947-1955 (1st Series) Chevrolet & GMC trucks. Specify Right or Left when ordering.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Trucks
Door Hinge Assemblies
CHEVROLET 1947-1955 TRUCK UPPER & LOWER DOOR HINGE - RT
This hinge set is for the RIGHT side upper and lower for all 1947-1955 Chevrolet & GMC trucks (except Cab Over Engine - COE models). Note: in 1955, used on First Series trucks ONLY. These hinges are complete assemblies and replace GM#'s 3688764 & 3688766.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
CHEVROLET 1947-55 TRUCK UPPER & LOWER DOOR HINGE-LF
This hinge set is for the left side upper and lower for all 1947-1955 Chevrolet & GMC trucks (except Cab Over Engine - COE models). Note: in 1955, used on First Series trucks ONLY. These hinges are complete assemblies and replace GM#'s 3688763 & 3688765.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
Hinge Pins
CHEVROLET 1932-87 CAR/PU DOOR HINGE BUSHING
Flange diameter= 0.59375" or 19/32" OD under head= 0.420" or 27/64" ID= 0.346" or 11/32"
For 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET 1928-1987 CAR/TRUCK DOOR HINGE PIN .340" OD
This door hinge pin is longer than necessary and must be cut down when installed. 4-1/16" long, 9/16 dia. head, .340" shank, and splines just below the head. Specific applications: 1928-1964 Chevrolet passenger cars; 1947-1955 (1st Series) Chevy & GMC Trucks (note: this pin is an oversize replacement for this application. Drill out to match); 1955 (2nd Series) - 1987 Chevy & GMC Trucks (See also GM-1081K for pin & bushing kit)
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET 1937-1953 TRUCK DOOR HINGE PIN-MIRROR
This door hinge pin fits 1937-1953 Chevrolet & GMC trucks. This pin is made longer to mount accessory door mirrors. These are made in STEEL and are approximately 3" long with an outside diameter of .275". Replaces GM# 598653 Specific Applications: 1937-1938 Single Units with Back Doors - Models 869, 871, 701, 703, 705; 1934-1946 All Trucks; 1947-1953 COE (Cab-Over-Engine)
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
CHEVROLET 1932-87 CAR 1955-87 TURCK HINGE PINS & BUSHINGS
HINGE PIN: 4" long, 9/16 dia. head, .340" shank, and splines just below the head.
For 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
Rear Door Hinge Seal
Glove Box Hinges
CHEVROLET 1947-1953 TRUCK GLOVE BOX DOOR HINGES
This is the pair of 1947-53 pickup glove box door hinges and springs. Includes the hardware. Replaces GM# 3683921, 3683922, 3693297, 3693298
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
Hinges
CHEVROLET 1942-1954 HOOD HINGE BOLT
These hood hinge bolts fit 1947-1954 Chevrolet and GMC trucks as well as 1942-1948 Chevrolet Passenger vehicles. 4 bolts required per vehicle. Dimensions: 5/16"-24 Thread x 1-1/4" Long, Head 5/8" Hex, Shoulder 7/16" (.4375")
For 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
Tailgate Hardware
Filters
Narrow results by department: