This reproduction of the 1937 Chevrolet Passenger Car Hood Center Support Rod is finished in chrome. This piece often cracks from the stress of lifting the hood. Replace your broken or missing support with this beautiful reproduction. Replaces GM# 594940. NOTE: This item has an additional shipping tube charge of $8.00, plus oversize shipping. Call or email us for a freight quote.

This is a 1937-1938 Coupe Lower Trunk Tail Pan Panel. It is the exterior sheet metal panel below trunk lid. Die stamped for a precision fit, rolls under the rear body to the factory seam. Extends upward about 12 inches, goes from fender to fender and includes complete die-formed weatherstrip channel for a tight trunk seal. 18 gage steel. A quality part, Made in USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

This is a 1937-1938 Sedan Lower Trunk Tail Pan Panel. Does not fit Flat Back Sedan without trunk. It is the exterior sheet metal panel below trunk lid. Die stamped for a precision fit, rolls under the rear body to the factory seam. Extends upward about 12 inches, goes from fender to fender and includes complete die-formed weatherstrip channel for a tight trunk seal. 18 gage steel. A quality part, Made in USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

1937 CHEV TRUCK GRILLE CENTER STRIP

This is for custom trucks with no hole for the emblem or crank hole.

FBO 12/22/11

FBO 12/22/11

This is a Steering Wheel Fits in center of steering wheel and holds horn components. Mirror polished stainless outer edge and zinc plated steel lower cap just like original. Show quality FITS 1931-37 ALL 1938-40 TRUCK

This is a Chrome Trunk Lid Handle that is correct for 1938-1939 Chevrolet passenger cars. Beautifully finished in shiny chrome, each handle comes with two keys. It fits 1935-1940 Chevrolet passenger cars as a replacement handle and may fit other GM makes as well. Handle shaft is 3-7/8" overall height x 4-7/8" overall length. Replaces GM# 4090230, 4102368 Specific Applications: 1935-1936 2 & 4 Door Sedans (replacement) - Style 1011, 1019, 1211, 1219; 1937 Bus Coupe, 2 & 4 Door Sedans (replacement) - Style# 1011, 1017, 1019, 1211, 1217, 1219; 1938-1939 Bus Coupe, 2 & 4 Door Sedans (original) - Style# 1011, 1017, 1019, 1211, 1217, 1219, 1511, 1519; 1940 Bus Coupe, 2 & 4 Door Sedans (replacement) - Style# 1011, 1017, 1019, 1211, 1217, 1219, 1511, 1519

1935-1936 Coupe & Sedan Lower Tail Pan Section. Fits the lower rear body section under the spare tire mount and rolls under the body. Includes correct body lines. Full width panel that extends upward 13 inches. Stamped in 18 gage steel. A quality part, Made in USA! Specific Applications: 1935 Master & All 1936 Coupes; 1935 Master & All 1936 Sedans without Trunks This part is oversize and special freight charges will apply. Call or email us for a freight quote.

This is an 8-piece set of running board trim for 1931-1932 Chevrolet passenger cars. It is made in aluminum and the set does both sides. Made in the USA!

This is a CHROME 4 piece set of hood latches for early Chevrolet cars & trucks. They are correct for all 1931 cars & trucks and also 1932 Chevy trucks. They will work on all 1929-1932 trucks and 1929-1931 passenger cars by using the correct forked hooks on the hood (GR-150). The hooks that go on the hood are sold separately. Overall Height in relaxed position: 5-1/4" - Extended Length 6-1/4". Replaces GM# 357092, 365848. Another quality part made by The Filling Station.

This is a BLACK 4 piece Hood Latch Set for early Chevrolet cars & trucks. They are correct for all 1931 cars & trucks and also 1932 Chevy trucks. They will work on all 1929-1932 trucks and 1929-1931 passenger cars by using the correct forked hooks on the hood (GR-150). The hooks that go on the hood are sold separately. Overall Height in relaxed position: 5-1/4" - Extended Length 6-1/4". Replaces GM# 357092, 365848. Another quality part made by The Filling Station.