FAX: (541) 258-6968
 
143 Items
Showing 1 thru 100
Glove Box Locks
Chevrolet Parts -  1964 GLOVE BOX LOCK-LATER KEY STYLE
118
USD $17.95 EA
CHEVROLET 1964 GLOVE BOX LOCK-LATER KEY STYLE
This is a Glove Box Lock Cylinder with later style GM keys for 1964 Chevrolet passenger cars. Replaces GM# 3839897, 3851705 Specific Applications: 1964 Chevrolet Passenger cars (except Corvette)

For 1964 Chevrolet Cars


Chevrolet Parts -  1964 GLOVE BOX LOCK-ORIGINAL STYLE
118A
USD $21.95 EA
CHEVROLET 1964 GLOVE BOX LOCK-ORIGINAL STYLE
This is a Glove Box Lock Cylinder with original style GM keys for 1964 Chevrolet passenger cars. Replaces GM# 3839897, 3851705 Specific Applications: 1964 Chevrolet Passenger cars (except Corvette)

For 1964 Chevrolet Cars

Glove Box & Trunk Lock Sets
Chevrolet Parts -  1964 GLOVE & TRUNK LOCK-LATER
121
USD $27.00 SET
CHEVROLET 1964 GLOVE & TRUNK LOCK-LATER
This is a Glove Box & Trunk Lock Cylinder Set for 1964 Chevrolet passenger cars. The set comes with glove box & trunk cylinders and with two later style GM keys, lock retainers and mounting clip.

For 1964 Chevrolet Cars

Glove Box Locks
Chevrolet Parts -  1958-1960 & 1963 GLOVE BOX LOCK-LATER KEYS
168
USD $19.95 SET
CHEVROLET 1958-1960 & 1963 GLOVE BOX LOCK-LATER KEYS
This is a new glove box lock cylinder with later style GM keys for 1958-1963 Chevrolet passenger cars. Replaces GM# 3829958, 38920889 Specific Applications: 1958-1960 Chevrolet Passenger cars; 1963 Chevrolet Passenger cars

For 1958 1959 1960 1961 1962 1963 Chevrolet Cars


Chevrolet Parts -  1958-60/63 GLOVE BOX LOCK-ORIGINAL
168A
USD $22.95 SET
CHEVROLET 1958-60/63 GLOVE BOX LOCK-ORIGINAL
This is a new glove box lock cylinder with original style GM keys for 1958-1963 Chevrolet passenger cars. Replaces GM# 3829958, 38920889 Specific Applications: 1958-1960 Chevrolet Passenger cars; 1963 Chevrolet Passenger cars

For 1963 Chevrolet Cars


Chevrolet Parts -  1940-1972 GLOVE BOX LOCK-LATER STYLE KEYS
169
USD $19.95 SET
CHEVROLET 1940-1972 GLOVE BOX LOCK-LATER STYLE KEYS
This is a new glove box lock cylinder with later style GM keys for 1940-1972 Chevrolet & GMC passenger cars & trucks. Replaces GM# 1394994, 3732065, 4099315 Specific Applications: 1940-1957 Passenger; 1961-1962 Passenger; 1954-1972 Truck

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks

Glove Box & Trunk Lock Sets
Chevrolet Parts -  1955-1957 & 1961-1962 GLOVE/TRUNK LOCK-LATER
171
USD $29.95 SET
CHEVROLET 1955-1957 & 1961-1962 GLOVE/TRUNK LOCK-LATER
This is a Glove Box & Trunk Lock Cylinder Set for 1955-1957 & 1961-1962 Chevrolet passenger cars. The set comes with glove box & trunk cylinders and with two later style GM keys, lock retainers and mounting clip.

For 1955 1956 1957 Chevrolet Cars

Glove Box Hardware
Chevrolet Parts -  1961-62 GLOVE/TRUNK LOCK-ORIGINAL
171A
USD $31.95 SET
CHEVROLET 1961-62 GLOVE/TRUNK LOCK-ORIGINAL
Comes with Original style keys and later style case cover.

For 1961 1962 Chevrolet Cars

Glove Box & Trunk Lock Sets
Chevrolet Parts -  1955-1957 GLOVE/TRUNK LOCK-ORIGINAL KEYS
171AR
USD $35.95 SET
CHEVROLET 1955-1957 GLOVE/TRUNK LOCK-ORIGINAL KEYS
This is a Glove Box & Trunk Lock Cylinder Set for 1955-1957 Chevrolet passenger cars. The set comes with glove box & trunk cylinders and with two original style GM keys, lock retainers and mounting clip.

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1958-1960-1963 GLOVE/TRUNK LOCK-LATER
172
USD $28.00 SET
CHEVROLET 1958-1960-1963 GLOVE/TRUNK LOCK-LATER
This is a Glove Box & Trunk Lock Cylinder Set for 1958, 1960 & 1963 Chevrolet passenger cars. The set comes with glove box & trunk cylinders and with two later style GM keys, lock retainers and mounting clip.

For 1963 Chevrolet Cars


Chevrolet Parts -  1958/60/63 GLOVE/TRUNK LOCK-ORIG
172A
USD $31.95 SET
CHEVROLET 1958/60/63 GLOVE/TRUNK LOCK-ORIG
This is a Glove Box & Trunk Lock Cylinder Set for 1958, 1960 & 1963 Chevrolet passenger cars. The set comes with glove box & trunk cylinders and with two original style GM keys, lock retainers and mounting clip.

For 1963 Chevrolet Cars


Chevrolet Parts -  1964 DOOR/GLOVE/TRUNK LOCK-LATER
173
USD $41.95 SET
CHEVROLET 1964 DOOR/GLOVE/TRUNK LOCK-LATER
This is a Door, Glove Box and Trunk Lock Set for 1964 Chevrolet passenger cars. Set comes with two door locks with long case and keyed alike with later keys. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1964 Chevrolet Cars

Door, Trunk & Glove Box Sets
Chevrolet Parts -  1964 DOOR/GLOVE/TRUNK LOCK ORIGINAL KEYS
173A
USD $54.95 SET
CHEVROLET 1964 DOOR/GLOVE/TRUNK LOCK ORIGINAL KEYS
This is a Door, Glove Box and Trunk Lock Set for 1964 Chevrolet passenger cars. Set comes with two door locks with long cases, all locks keyed alike with original pear-shaped keys. Also included are mounting clips & gaskets. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1964 Chevrolet Cars


Chevrolet Parts -  1961-62 DOOR/GLOVE/TRUNK LOCK-LATER
177
USD $48.95 SET
CHEVROLET 1961-62 DOOR/GLOVE/TRUNK LOCK-LATER
Door locks come with lock pawls, and later style keys.

For 1961 1962 Chevrolet Cars


Chevrolet Parts -  1961-62 DOOR/GLOVE/TRUNK LOCK-ORIGINAL
177A
USD $51.95 SET
CHEVROLET 1961-62 DOOR/GLOVE/TRUNK LOCK-ORIGINAL
This is a Door, Glove Box and Trunk Lock Set for 1961-9162 Chevrolet passenger cars. Set comes with two door locks with all locks keyed alike with original Keys. Also included are mounting clips & gaskets. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1961 1962 Chevrolet Cars


Chevrolet Parts -  1958 & 1963 DOOR/GLOVE/TRUNK LOCK-LATER
178
USD $45.00 SET
CHEVROLET 1958 & 1963 DOOR/GLOVE/TRUNK LOCK-LATER
This is a Door, Glove Box and Trunk Lock Set for 1958 & 1963 Chevrolet passenger cars. Set comes with two door locks with all locks keyed alike with later Keys. Also included are mounting clips & gaskets. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1958 1959 1960 1961 1962 1963 Chevrolet Cars


Chevrolet Parts -  1958-63 DOOR/GLOVE/TRUNK LOCK-ORIGINAL
178A
USD $51.95 SET
CHEVROLET 1958-63 DOOR/GLOVE/TRUNK LOCK-ORIGINAL
This is a Door, Glove Box and Trunk Lock Set for 1958 & 1963 Chevrolet passenger cars. Set comes with two door locks with all locks keyed alike with original Keys. Also included are mounting clips & gaskets. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1963 Chevrolet Cars


Chevrolet Parts -  1955 & 1957 DOOR/GLOVE/TRUNK LOCK-PEAR
179
USD $55.00 SET
CHEVROLET 1955 & 1957 DOOR/GLOVE/TRUNK LOCK-PEAR
This is a Door, Glove Box and Trunk Lock Set for 1955 & 1957 Chevrolet passenger cars. Set comes with two door locks with U-pawls and all locks keyed alike with original Keys. Also included are mounting clips & gaskets. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1956 DOOR/GLOVE/TRUNK LOCK-ORIG KEYS-HEX
247
USD $56.00 SET
CHEVROLET 1956 DOOR/GLOVE/TRUNK LOCK-ORIG KEYS-HEX
This is a Set of Door Locks, Glove Box & Trunk Locks for 1956 Chevrolet passenger cars. Set comes with two short case door locks with flat pawl, glove box and trunk locks all keyed alike with Original Style keys. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1956 Chevrolet Cars

Ignition Door & Glovebox Lock Sets
Chevrolet Parts -  1967-72 TRUCK IGN/DOOR/GLOVE LOCKS
284
USD $42.00 SET
CHEVROLET 1967-72 TRUCK IGN/DOOR/GLOVE LOCKS
This is a Set of Ignition, Door & Glove Box Locks for 1967-1972 Chevrolet & GMC Trucks. Set includes: Two Door Locks, Ignition & Glove Box Locks all keyed to match with Later Type Keys; Retainers & Mounting Gaskets.

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1967-68 TRUCK IGN/DOOR/GLOVE LOCKS
285
USD $45.00 SET
CHEVROLET 1967-68 TRUCK IGN/DOOR/GLOVE LOCKS
This is a Set of Ignition, Door & Glove Box Locks for 1967-1968 Chevrolet & GMC Trucks. Set includes: Two Door Locks, Ignition & Glove Box Locks keyed to match with Original Type Keys; Retainers & Mounting Gaskets.

For 1967 1968 Chevrolet Trucks

Ignition Door Glovebox & Trunk Sets
Chevrolet Parts -  1955-57 IGN/DOOR/TRUNK/GLOVE LOCKS-U-PAWLS
420
USD $75.00 SET
CHEVROLET 1955-57 IGN/DOOR/TRUNK/GLOVE LOCKS-U-PAWLS
This is a Set of Ignition, Door, Trunk & Glove Box Locks for 1955-1957 Chevrolet passenger cars. Kit comes complete with the ignition, two doors, trunk & glove box locks all keyed to the same key. Comes with two Original GM keys. Door locks come with U-shaped pawls. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1955-1957 IGN/DOOR/TRUNK/GLOVE LOCK-FLAT
421
USD $75.00 SET
CHEVROLET 1955-1957 IGN/DOOR/TRUNK/GLOVE LOCK-FLAT
This is a Set of Ignition, Door, Trunk & Glove Box Locks for 1955-1957 Chevrolet passenger cars. Kit comes complete with the ignition, two doors, trunk & glove box locks all keyed to the same key. Comes with two Original GM keys. Door locks come with flat pawls. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1958 IGN/DOOR/TRUNK/GLOVE LOCK-LONG
422
USD $74.95 SET
CHEVROLET 1958 IGN/DOOR/TRUNK/GLOVE LOCK-LONG
Kit comes complete with the ignition, doors, glove box and trunk lock all keyed to the same key. Comes with two (2) original GM keys. Comes with long cylinder.

For 1958 Chevrolet Cars


Chevrolet Parts -  1958 IGN/DOOR/TRUNK/GLOVE LOCK-SHORT
423
USD $74.95 SET
CHEVROLET 1958 IGN/DOOR/TRUNK/GLOVE LOCK-SHORT
This is a Set of Ignition, Door, Trunk & Glove Box Locks for 1958 Chevrolet passenger cars. Kit comes complete with the ignition, two doors, trunk & glove box locks all keyed to the same key. Comes with two Original GM keys, lock clips and mounting gaskets. Door locks are short case and come with flat pawls. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1958 Chevrolet Cars


Chevrolet Parts -  1961-1962 IGN/DOOR/TRUNK/GLOVE LOCK-LONG
424
USD $60.00 SET
CHEVROLET 1961-1962 IGN/DOOR/TRUNK/GLOVE LOCK-LONG
This is a Set of Ignition, Door, Trunk & Glove Box Locks for 1961-1962 Chevrolet passenger cars. Kit comes complete with the ignition, two doors, trunk & glove box locks all keyed to the same key. Comes with two Original GM keys, lock clips and mounting gaskets. Door locks are long case. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1961 1962 Chevrolet Cars


Chevrolet Parts -  1961-1962 IGN/DOOR/TRUNK/GLOVE LOCK-SHORT
425
USD $69.00 SET
CHEVROLET 1961-1962 IGN/DOOR/TRUNK/GLOVE LOCK-SHORT
This is a Set of Ignition, Door, Trunk & Glove Box Locks for 1961-1962 Chevrolet passenger cars. Kit comes complete with the ignition, two doors, trunk & glove box locks all keyed to the same key. Comes with two Original GM keys, lock clips and mounting gaskets. Door locks are short case with flat pawls. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1961 1962 Chevrolet Cars


Chevrolet Parts -  1963 IGN/DOOR/TRUNK/GLOVE LOCK-LONG
426
USD $69.00 SET
CHEVROLET 1963 IGN/DOOR/TRUNK/GLOVE LOCK-LONG
This is a Set of Ignition, Door, Trunk & Glove Box Locks for 1963 Chevrolet passenger cars. Kit comes complete with the ignition, two doors, trunk & glove box locks all keyed to the same key. Comes with two Original GM keys, lock clips and mounting gaskets. Door locks are long case. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1963 Chevrolet Cars


Chevrolet Parts -  1963 IGN/DOOR/TRUNK/GLOVE LOCKS-SHORT
427
USD $78.95 SET
CHEVROLET 1963 IGN/DOOR/TRUNK/GLOVE LOCKS-SHORT
This is a Set of Ignition, Door, Trunk & Glove Box Locks for 1963 Chevrolet passenger cars. Kit comes complete with the ignition, two doors, trunk & glove box locks all keyed to the same key. Comes with two Original GM keys, lock clips and mounting gaskets. Door locks are short case with flat pawls. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1963 Chevrolet Cars


Chevrolet Parts -  1964 IGN/DOOR/TRUNK/GLOVE LOCK-LONG
428
USD $69.00 SET
CHEVROLET 1964 IGN/DOOR/TRUNK/GLOVE LOCK-LONG
This is a Set of Ignition, Door, Trunk & Glove Box Locks for 1964 Chevrolet passenger cars. Kit comes complete with the ignition, two doors, trunk & glove box locks all keyed to the same key. Comes with two Original GM keys, lock clips and mounting gaskets. Door locks are long case. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1964 Chevrolet Cars


Chevrolet Parts -  1964 IGN/DOOR/TRUNK/GLOVE LOCK-SHRT
429
USD $74.95 SET
CHEVROLET 1964 IGN/DOOR/TRUNK/GLOVE LOCK-SHRT
This is a Set of Ignition, Door, Trunk & Glove Box Locks for 1964 Chevrolet passenger cars. Kit comes complete with the ignition, two doors, trunk & glove box locks all keyed to the same key. Comes with two Original GM keys, lock clips and mounting gaskets. Door locks are short case with flat pawls. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1964 Chevrolet Cars

Glove Box & Trunk Lock Sets
Chevrolet Parts -  1959 GLOVE/TRUNK LOCK-ORIGINAL
460
USD $49.00 SET
CHEVROLET 1959 GLOVE/TRUNK LOCK-ORIGINAL
This is a Set of Glove Box & Trunk Locks for 1959 Chevrolet passenger cars. Set comes with glove box and trunk locks keyed alike with Original Style keys.

For 1959 Chevrolet Cars

Glove Box Door Bumper
Chevrolet Parts -  1936-42 GLOVE BOX DOOR CHECK BUMPER
70-1459
USD $7.99 EA
CHEVROLET 1936-42 GLOVE BOX DOOR CHECK BUMPER
1936-42 Door check arm bumper (sleeve)

For 1936 1937 1938 1939 1940 1941 1942 Chevrolet Cars


Chevrolet Parts -  1958 GLOVE BOX DOOR CHECK BUMPER
70-968
USD $21.19 EA
CHEVROLET 1958 GLOVE BOX DOOR CHECK BUMPER
1958 Door check arm bumper

For 1958 Chevrolet Cars

Glove Box Bumpers
Chevrolet Parts -  1955-57 GLOVE BOX DOOR CHECK BUMPER
B-367
USD $1.50 EA
CHEVROLET 1955-57 GLOVE BOX DOOR CHECK BUMPER
Door check arm bumper

For 1955 1956 1957 Chevrolet Cars

Glove Box Hardware
Chevrolet Parts -  1940-53 TRUCK GLOVE BOX LOCK & KEY
CD-53
USD $25.95 EA
CHEVROLET 1940-53 TRUCK GLOVE BOX LOCK & KEY
This is a new glove box lock cylinder with original style GM keys for 1940-1953 Chevrolet & GMC trucks. Replaces GM# 4099314, 4099316

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks


Chevrolet Parts -  1940-1953 TRUCK GLOVE BOX LOCK RETAINER
CD-53R
USD $6.95 EA
CHEVROLET 1940-1953 TRUCK GLOVE BOX LOCK RETAINER
This is a glove box lock cylinder retainer for 1940-1953 Chevrolet & GMC trucks.

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks


Chevrolet Parts -  1967-72 PU GLOVE BOX INSTALLATION SCREW SET
CD-67
USD $2.50 SET
CHEVROLET 1967-72 PU GLOVE BOX INSTALLATION SCREW SET
PU GLOVE BOX INSTALLATION SCREW SET

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1940-53 PU GLOVE BOX LOCK "J" HOOK
CD-68
USD $3.95 EA
CHEVROLET 1940-53 PU GLOVE BOX LOCK "J" HOOK
This is a repair kit for 1940-1953 Chevrolet & GMC glove box locks. Replaces broken “J” hook & pin - to repair broken lock.

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

Glove Box Door Scripts
Chevrolet Parts -  1967-68PU GLOVE BOX DOOR "CHEVROLET"
CM-9575
USD $29.95 EA
CHEVROLET 1967-68PU GLOVE BOX DOOR "CHEVROLET"
“Chevrolet” script

For 1967 1968 Chevrolet Trucks


Chevrolet Parts -  1969-72 GLOVE BOX "CHEVROLET-CUSTOM"
CM-9670
USD $27.95 EA
CHEVROLET 1969-72 GLOVE BOX "CHEVROLET-CUSTOM"
“Chevrolet Custom” script

For 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1969-70 PU GLOVE BOX "CHEVROLET-CST"
CM-9675
USD $27.95 EA
CHEVROLET 1969-70 PU GLOVE BOX "CHEVROLET-CST"
“GMC Custom” script

For 1969 1970 Chevrolet Trucks


Chevrolet Parts -  1971 GLOVE BOX DOOR "CHEYENNE SUPER"
CM-9710
USD $85.95 EA
CHEVROLET 1971 GLOVE BOX DOOR "CHEYENNE SUPER"
“Cheyenne Super” script

For 1971 Chevrolet Trucks


Chevrolet Parts -  1972 GLOVE BOX DOOR "CHEYENNE SUPER"
CM-9740
USD $71.98 EA
CHEVROLET 1972 GLOVE BOX DOOR "CHEYENNE SUPER"
“Cheyenne Super” script

For 1972 Chevrolet Trucks


GMC Parts -  1969-72 PU GLOVE BOX "GMC-CUSTOM"
CM-9875
USD $27.95 EA
GMC 1969-72 PU GLOVE BOX "GMC-CUSTOM"
“GMC Custom” script

For 1969 1970 1971 1972 GMC Trucks

Glove Box Locks
Chevrolet Parts -  1940-62 CAR/1954-72 TRK GLOVE BOX LOCK-ORIG
DS-429A
USD $21.95 EA
CHEVROLET 1940-62 CAR/1954-72 TRK GLOVE BOX LOCK-ORIG
This is a new glove box lock cylinder with original style GM keys for 1940-1972 Chevrolet & GMC passenger cars & trucks. Replaces GM# 1394994, 3732065, 4099315 Specific Applications: 1940-1957 Passenger; 1961-1962 Passenger; 1954-1972 Truck

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks

Glove Box Inserts
GMC Parts -  1955-59 GMC TRUCK GLOVE BOX INSERT
DS-432
USD $12.95 EA
GMC 1955-59 GMC TRUCK GLOVE BOX INSERT
This cardboard glove box insert fits all 1955-1959 (2nd Series) GMC trucks. Each assembly is die cut and stapled together for an exact fit.

For 1955 1956 1957 1958 1959 GMC Trucks

Key Blanks
Chevrolet Parts -  1936-66 TRUNK/GLOVE BOX KEY BLANK
FS-17701
USD $3.25 EA
CHEVROLET 1936-66 TRUNK/GLOVE BOX KEY BLANK
This is an original style Hexagon Round Key Blank for Trunk or Glove Box on 1935-1966 Chevrolet & GMC cars & Trucks. Replaces GM# 601272

For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars and Trucks

Glove Box Door Decals
Chevrolet Parts -  1967-72 WOODGRAIN GLOVE BOX DECAL-STD
FS-658
USD $12.95 EA
CHEVROLET 1967-72 WOODGRAIN GLOVE BOX DECAL-STD
GLOVE BOX DECAL - STD

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1971-1972 WOODGRAIN GLOVE BOX DECAL-CST
FS-659
USD $15.50 EA
CHEVROLET 1971-1972 WOODGRAIN GLOVE BOX DECAL-CST
GLOVE BOX DECAL-CST

For 1971 1972 Chevrolet Trucks

Glove Box Inserts
GMC Parts -  1960-66 GMC GLOVE BOX INSERT
FS-674
USD $12.95 EA
GMC 1960-66 GMC GLOVE BOX INSERT
This cardboard glove box insert fits all 1960-1966 GMC trucks. Each assembly is die cut and stapled together for an exact fit.

For 1960 1961 1962 1963 1964 1965 1966 GMC Trucks


Chevrolet Parts -  1934 MASTER GLOVE BOX INSERT
GB-34
USD $24.95 EA
CHEVROLET 1934 MASTER GLOVE BOX INSERT
This is the cardboard glove box insert for 1934 Chevrolet Master passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 4044703

For 1934 Chevrolet Cars


Chevrolet Parts -  1937 PASSENGER GLOVE BOX INSERT
GB-37
USD $24.95 EA
CHEVROLET 1937 PASSENGER GLOVE BOX INSERT
This is the cardboard glove box insert for 1937 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Dimensions: Front to Back - 9-3/4", Width at Front - 12", Width at Back 9-7/8", Height at Front 5-1/2", Height at Back 5". Replaces GM# 4073755

For 1937 Chevrolet Cars


Chevrolet Parts -  1938 PASSENGER GLOVE BOX INSERT
GB-38
USD $24.95 EA
CHEVROLET 1938 PASSENGER GLOVE BOX INSERT
This is the cardboard glove box insert for 1938 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 4081940

For 1938 Chevrolet Cars


Chevrolet Parts -  1939 PASSENGER GLOVE BOX INSERT
GB-39
USD $24.95 EA
CHEVROLET 1939 PASSENGER GLOVE BOX INSERT
This is the cardboard glove box insert for 1939 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 4089940

For 1939 Chevrolet Cars


Chevrolet Parts -  1940 PASSENGER GLOVE BOX INSERT
GB-40
USD $24.95 EA
CHEVROLET 1940 PASSENGER GLOVE BOX INSERT
This is the cardboard glove box insert for 1940 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 4101943

For 1940 Chevrolet Cars


Chevrolet Parts -  1941-48 PASSENGER GLOVE BOX INSERT
GB-4148
USD $24.95 EA
CHEVROLET 1941-48 PASSENGER GLOVE BOX INSERT
This is the cardboard glove box insert for 1941-1948 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 4116124

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1949-50 CAR GLOVE BOX INSERT-CARDBOARD
GB-4950
USD $24.95 EA
CHEVROLET 1949-50 CAR GLOVE BOX INSERT-CARDBOARD
This is the cardboard glove box insert for 1949-1950 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 4586673

For 1949 1950 Chevrolet Cars


Chevrolet Parts -  1951-52 CAR GLOVE BOX INSERT-CARDBOARD
GB-5152
USD $24.95 EA
CHEVROLET 1951-52 CAR GLOVE BOX INSERT-CARDBOARD
This is the cardboard glove box insert for 1951-1952 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Includes mounting hardware. Replaces GM# 4588363

For 1951 1952 Chevrolet Cars


Chevrolet Parts -  1953-54 CAR GLOVE BOX INSERT-CARDBOARD
GB-5354
USD $24.95 EA
CHEVROLET 1953-54 CAR GLOVE BOX INSERT-CARDBOARD
This is the cardboard glove box insert for 1953-1954 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 4599945

For 1953 1954 Chevrolet Cars


Chevrolet Parts -  1955-56 CAR GLOVE BOX INSERT-CARDBOARD
GB-5556
USD $19.95 EA
CHEVROLET 1955-56 CAR GLOVE BOX INSERT-CARDBOARD
This is the cardboard glove box insert for 1955-1956 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 4649392

For 1955 1956 Chevrolet Cars


Chevrolet Parts -  1957 CAR GLOVE BOX INSERT-CARDBOARD
GB-57
USD $19.95 EA
CHEVROLET 1957 CAR GLOVE BOX INSERT-CARDBOARD
This is the cardboard glove box insert for 1957 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 4697438

For 1957 Chevrolet Cars


Chevrolet Parts -  1958 CAR GLOVE BOX INSERT-CARDBOARD
GB-58
USD $19.95 EA
CHEVROLET 1958 CAR GLOVE BOX INSERT-CARDBOARD
This is the cardboard glove box insert for 1958 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 4718628

For 1958 Chevrolet Cars


Chevrolet Parts -  1959-60 CAR GLOVE BOX INSERT-CARDBOARD
GB-5960
USD $19.95 EA
CHEVROLET 1959-60 CAR GLOVE BOX INSERT-CARDBOARD
This is the cardboard glove box insert for 1959-1960 Chevrolet passenger cars. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 3756317

For 1959 1960 Chevrolet Cars


Chevrolet Parts -  1961-62 CAR GLOVE BOX-W/O AIR CONDITIONING
GB-6162
USD $19.95 EA
CHEVROLET 1961-62 CAR GLOVE BOX-W/O AIR CONDITIONING
This is the cardboard glove box insert for 1961-1962 Chevrolet passenger cars WITHOUT Air Conditioning. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 3785539

For 1961 1962 Chevrolet Cars


Chevrolet Parts -  1961-62 CAR GLOVE BOX-W/AIR CONDITIONING
GB-6162A
USD $19.95 EA
CHEVROLET 1961-62 CAR GLOVE BOX-W/AIR CONDITIONING
This is the cardboard glove box insert for 1961-1962 Chevrolet passenger cars WITH Air Conditioning. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 3817510

For 1961 1962 Chevrolet Cars


Chevrolet Parts -  1963-64 CAR GLOVE BOX-W/O AIR CONDITIONING
GB-6364
USD $19.95 EA
CHEVROLET 1963-64 CAR GLOVE BOX-W/O AIR CONDITIONING
This is the cardboard glove box insert for 1963-1964 Chevrolet passenger cars WITHOUT Air Conditioning. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 3824239, 3841767

For 1963 1964 Chevrolet Cars


Chevrolet Parts -  1963-64 CAR GLOVE BOX-W/AIR CONDITIONING
GB-6364A
USD $19.95 EA
CHEVROLET 1963-64 CAR GLOVE BOX-W/AIR CONDITIONING
This is the cardboard glove box insert for 1963-1964 Chevrolet passenger cars WITH Air Conditioning. Passenger car inserts are felt lined on the inside. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 3839287, 3825531, 3841896, 3841897

For 1963 1964 Chevrolet Cars


GMC Parts -  1954-55 GMC TRUCK GLOVE BOX INSERT
GB-G5455
USD $13.50 EA
GMC 1954-55 GMC TRUCK GLOVE BOX INSERT
This cardboard glove box insert fits all 1954-1955 GMC trucks. Note: in 1955, fits 1st Series Only. Each assembly is die cut and stapled together for an exact fit.

For 1954 1955 GMC Trucks


Chevrolet Parts -  1936-38 TRUCK GLOVE BOX INSERT
GB-T3638
USD $12.95 EA
CHEVROLET 1936-38 TRUCK GLOVE BOX INSERT
This cardboard glove box insert fits all 1936-1938 Chevrolet & GMC trucks. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 473524

For 1936 1937 1938 Chevrolet Trucks


Chevrolet Parts -  1939 TRUCK GLOVE BOX INSERT
GB-T39
USD $21.50 EA
CHEVROLET 1939 TRUCK GLOVE BOX INSERT
This cardboard glove box insert fits all 1939 Chevrolet & GMC trucks. Each assembly is die cut and stapled together for an exact fit. Dimensions: 5-3/4" x 13-1/4" Opening x 10" Deep. Replaces GM# 598886

For 1939 Chevrolet Trucks


Chevrolet Parts -  1940-46 TRUCK GLOVE BOX INSERT
GB-T4046
USD $12.95 EA
CHEVROLET 1940-46 TRUCK GLOVE BOX INSERT
This cardboard glove box insert fits all 1940-1946 Chevrolet & GMC trucks. Each assembly is die cut and stapled together for an exact fit. Dimensions: 6-5/8" x 12" Opening x 10-3/4" Deep. Replaces GM# 3654001

For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks


GMC Parts -  1947-49 CHEV/GMC TRUCK GLOVE BOX INSERT
GB-T4749
USD $12.95 EA
GMC 1947-49 CHEV/GMC TRUCK GLOVE BOX INSERT
This cardboard glove box insert fits all 1947-1949 Chevrolet & GMC trucks. Each assembly is die cut and stapled together for an exact fit. Dimensions: 4-7/8" x 14" Opening x 8-3/4" Deep. Replaces GM# 3676451

For 1947 1948 1949 GMC Trucks


Chevrolet Parts -  1950-53 TRUCK GLOVE BOX INSERT
GB-T5053
USD $13.50 EA
CHEVROLET 1950-53 TRUCK GLOVE BOX INSERT
This cardboard glove box insert fits all 1950-1953 Chevrolet & GMC trucks. Each assembly is die cut and stapled together for an exact fit. Dimensions: 5-7/32" x 14-3/16" Opening x 9-1/8" Deep. Replaces GM# 3704220

For 1950 1951 1952 1953 Chevrolet Trucks


Chevrolet Parts -  1954-55 CHEV TRUCK GLOVE BOX INSERT
GB-T5455
USD $12.95 EA
CHEVROLET 1954-55 CHEV TRUCK GLOVE BOX INSERT
This cardboard glove box insert fits all 1954-1955 (1st Series) Chevrolet trucks (exc. Flat Faced Cowl). Each assembly is die cut and stapled together for an exact fit. Dimensions: 5-1/2" x 13-3/4" Opening x 9" Deep. Replaces GM# 3701366

For 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1955-59 CHEV TRUCK GLOVE BOX INSERT
GB-T5559
USD $12.95 EA
CHEVROLET 1955-59 CHEV TRUCK GLOVE BOX INSERT
This cardboard glove box insert fits all 1955-1959 (2nd Series) Chevrolet trucks. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 3746424

For 1955 1956 1957 1958 1959 Chevrolet Trucks


Chevrolet Parts -  1960-63 CHEV TRUCK GLOVE BOX INSERT
GB-T6063
USD $12.95 EA
CHEVROLET 1960-63 CHEV TRUCK GLOVE BOX INSERT
This cardboard glove box insert fits all 1960-1963 Chevrolet trucks (exc. Flat Faced Cowl). Each assembly is die cut and stapled together for an exact fit. Dimensions: 18" x 6" Opening x 9" Deep. Replaces GM# 3769901

For 1960 1961 1962 1963 Chevrolet Trucks


Chevrolet Parts -  1964-66PU GLOVE BOX INSERT-NO AIR
GB-T6466
USD $13.50 EA
CHEVROLET 1964-66PU GLOVE BOX INSERT-NO AIR
This cardboard glove box insert fits all 1964-1966 Chevrolet & GMC trucks WITHOUT Air Conditioning (exc. Flat Faced Cowl, Van). Each assembly is die cut and stapled together for an exact fit. Dimensions: 19" X 5-1/2" Opening x 10-1/2" Deep. Replaces GM# 3833519

For 1964 1965 1966 Chevrolet Trucks


Chevrolet Parts -  1964-66PU GLOVE BOX INSERT W/AIR
GB-T6466A
USD $12.95 EA
CHEVROLET 1964-66PU GLOVE BOX INSERT W/AIR
This cardboard glove box insert fits all 1964-1966 Chevrolet trucks WITH Air Conditioning (exc. G-10 Van). Each assembly is die cut and stapled together for an exact fit. Dimensions: 15-1/2" X 5-3/4" Opening x 10" Deep. Replaces GM# 3857118

For 1964 1965 1966 Chevrolet Trucks


Chevrolet Parts -  1967-72 PU GLOVE BOX INSERT-NO AIR
GB-T6772
USD $12.95 EA
CHEVROLET 1967-72 PU GLOVE BOX INSERT-NO AIR
This cardboard glove box insert fits all 1967-1972 Chevrolet & GMC trucks WITHOUT Air Conditioning. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 3888558

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1967-72 PU GLOVE BOX INSERT-WITH AIR
GB-T6772A
USD $12.95 EA
CHEVROLET 1967-72 PU GLOVE BOX INSERT-WITH AIR
This cardboard glove box insert fits all 1967-1972 Chevrolet & GMC trucks WITH Air Conditioning. Each assembly is die cut and stapled together for an exact fit. Replaces GM# 3919291

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks

Glove Box Hardware
Chevrolet Parts -  1953-57 Passenger  GLOVE BOX STRIKER
OS-66
USD $14.95 EA
CHEVROLET 1953-57 Passenger GLOVE BOX STRIKER
This is a Glove Box Striker Plate with screws for 1953-1957 Chevrolet passenger cars. Replaces GM# 4626627, 4626628

For 1953 1954 1955 1956 1957 Chevrolet Cars

Glove Box Bumpers
Chevrolet Parts -  1934-72 GLOVE BOX DOOR BUMPERS
PO-A
USD $1.50 PR
CHEVROLET 1934-72 GLOVE BOX DOOR BUMPERS
This is a pair of glove box door bumpers for 1934-1972 Chevrolet & GMC cars & trucks. Replaces GM# 4128599, 3765243

For 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks

Glove Box Door Decals
Chevrolet Parts -  1967-72PU 4X4 GLOVE BOX DOOR DECAL
RW-312
USD $8.95 EA
CHEVROLET 1967-72PU 4X4 GLOVE BOX DOOR DECAL
1967-72PU 4X4 GLOVE BOX DOOR DECAL

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks

Glove Box Bumpers
Chevrolet Parts -  1967-72 PU GLOVE BOX ARM GROMMETS
TN-103
USD $3.50 PR
CHEVROLET 1967-72 PU GLOVE BOX ARM GROMMETS
GLOVE BOX ARM GROMMETS

For 1968 1969 1970 1971 1972 Chevrolet Trucks

Glove Box Hardware
Chevrolet Parts -  1960-66PU GLOVE BOX STRIKER PLATE
TR-118
USD $5.95 EA
CHEVROLET 1960-66PU GLOVE BOX STRIKER PLATE
GLOVE BOX STRIKER PLATE

For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks


Chevrolet Parts -  1967-72PU GLOVE BOX STRIKER PLATE
TR-119
USD $5.95 EA
CHEVROLET 1967-72PU GLOVE BOX STRIKER PLATE
GLOVE BOX STRIKER PLATE

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks

Glove Box Door Scripts
Chevrolet Parts -  1964-66PU GLOVE BOX DOOR EMBLEM-GRAY
TR-120
USD $27.95 EA
CHEVROLET 1964-66PU GLOVE BOX DOOR EMBLEM-GRAY
This is a Plastic Glove Box Door Nameplate for 1964-1966 Chevrolet Trucks. Emblem is gray plastic as original. Also available in chrome. Replaces GM# 3838592

For 1964 1965 1966 Chevrolet Trucks


Chevrolet Parts -  1964-66PU GLOVE BOX DOOR EMBLEM - CHROME
TR-120C
USD $34.95 EA
CHEVROLET 1964-66PU GLOVE BOX DOOR EMBLEM - CHROME
This is a CHROME Plastic Glove Box Door Nameplate for 1964-1966 Chevrolet Trucks. Also available in gray, as original. Replaces GM# 3838592

For 1964 1965 1966 Chevrolet Trucks

Glove Box Hardware
Chevrolet Parts -  1954-59 PU GLOVE BOX STRIKER PLATE
TR-15
USD $6.50 EA
CHEVROLET 1954-59 PU GLOVE BOX STRIKER PLATE
This is a Glove Box Striker Plate with Screws for 1954-1959 Chevrolet & GMC Trucks.

For 1954 1955 1956 1957 1958 1959 Chevrolet Trucks

Glove Box Lights
Chevrolet Parts -  1954-72 GLOVE BOX LAMP ASSEMBLY
TR-177
USD $14.95 EA
CHEVROLET 1954-72 GLOVE BOX LAMP ASSEMBLY
This glove box light assembly fits 1954-1972 Chevrolet & GMC cars & trucks. Each unit comes with the light and wiring, ready to install. This assembly comes with a 12 volt bulb but can be used with a 6 volt system by changing the bulb. Replaces GM# 986899 Specific Applications: 1954-1972 Chevy & GMC Trucks; 1956-1972 Full Size Passenger Cars

For 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks

Glove Box Hardware
Chevrolet Parts -  1940-62 CAR/1954-72 TRK GLOVE BOX LOCK RETAINER
TR-46
USD $3.50 EA
CHEVROLET 1940-62 CAR/1954-72 TRK GLOVE BOX LOCK RETAINER
This is a glove box lock cylinder retainer for 1940-1972 Chevrolet & GMC passenger cars & trucks. Replaces GM# 4599106, 4131049 Specific Applications: 1940-1957 Passenger; 1961-1962 Passenger; 1954-1972 Truck

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks

Glove Box Doors
Chevrolet Parts -  1947-53 TRUCK GLOVE BOX DOOR-SS & BLACK
TR-350
USD $109.95 EA
CHEVROLET 1947-53 TRUCK GLOVE BOX DOOR-SS & BLACK
SS & BLACK

For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks


Chevrolet Parts -  1947-53 TRUCK GLOVE BOX DOOR-ALL SS
TR-350SS
USD $109.95 EA
CHEVROLET 1947-53 TRUCK GLOVE BOX DOOR-ALL SS
See TR-350 for Stainless door with black painted highlights.

For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks


Chevrolet Parts -  1955-59 CHEV PU GLOVE BOX DOOR W/HINGE
TR-351
USD $99.95 EA
CHEVROLET 1955-59 CHEV PU GLOVE BOX DOOR W/HINGE
This glove box door and hinge assembly fits all 1955 (2nd Series) - 1959 Chevrolet trucks. Comes with the glove box door, hinge assembly and door checks. Replaces GM# 3717855, 3712288, 3716483, 3716484

For 1955 1956 1957 1958 1959 Chevrolet Trucks


Chevrolet Parts -  1967-1972 TRUCK GLOVE BOX DOOR - BLACK
TR-352
USD $99.95 EA
CHEVROLET 1967-1972 TRUCK GLOVE BOX DOOR - BLACK
BLACK

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1967-72 TRUCK GLOVE BOX DOOR - CHROME
TR-352C
USD $189.95 EA
CHEVROLET 1967-72 TRUCK GLOVE BOX DOOR - CHROME
CHROME

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks

Ignition Door & Glovebox Lock Sets
Chevrolet Parts -  1960-66 TRUCK IGN/DOOR/GLOVE LOCKS
286
USD $89.95 SET
CHEVROLET 1960-66 TRUCK IGN/DOOR/GLOVE LOCKS
Comes with Original style keys.

For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars


Chevrolet Parts -  1955-59 TRUCK IGN/DOOR/GLOVE LOCKS
287
USD $89.95 SET
CHEVROLET 1955-59 TRUCK IGN/DOOR/GLOVE LOCKS
1955 2ND SERIES ONLY. Comes with Original style keys.

For 1955 1956 1957 1958 1959 Chevrolet Cars


Chevrolet Parts -  1954-55 TRUCK IGN/DOOR/GLOVE LOCKS
288
USD $99.95 SET
CHEVROLET 1954-55 TRUCK IGN/DOOR/GLOVE LOCKS
1955 1ST SERIES ONLY. Comes with Original style keys.

For 1954 1955 Chevrolet Cars

143 Items
Showing 1 thru 100
Copyright ©2024 The Filling Station, LLC
E-mail: fssales@fillingstation.com