In area around hinges where irregular cross section is required. Bend and trim to suit requirement. Usually held in place by steel retainer. A low-cost universal replacement.
For 1942 1944 1945 1946 1947 1948 1949 Chevrolet Cars
These springs are for the hood hinges on all 1942-1948 Chevrolet passenger cars, including Sedan Delivery. Coil Length is 6", diameter is 1" OD, Overall Length is 7-7/8" long. Replaces GM# 3663756.
This is a set of hood hinge springs for 1960-1966 Chevrolet & GMC trucks. Dimensions: Coil 6 3/4 " long x 1 3/4" Diameter, Overall Length 11". Replaces GM# 3838688
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a STEEL hood hinge spring for 1967-1972 Chevrolet & GMC trucks. Two springs required per vehicle. Dimensions: Coil 4-1/4 " long x 2 3/8" Diameter, Overall Length 8". Replaces GM# 3890741
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This hood hinge fits all 1967-1972 Chevrolet & GMC trucks. Specify Right or Left when ordering. Order hood springs separately. Replaces GM# 3911705, 3911706
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This hood hinge fits all 1967-1972 Chevrolet & GMC trucks. Specify Right or Left when ordering. Order hood springs separately. Replaces GM# 3911705, 3911706
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
These hood hinge springs fit 1953-1954 Chevrolet passenger cars. Sold in a pair for both hinges. Dimensions: 1 3/4" OD X 11-1/8" Long. Replaces GM# 3700259
These hood hinge springs fit 1957 Chevrolet passenger cars. Sold in a pair for both hinges. Dimensions: 7" Free Length - 23 Coils. Replaces GM# 3731192
This hood hinge shoulder bolt fits all 1949-1954 Chevrolet passenger cars, including Sedan Delivery. The bolt dimensions are: 5/16-24 x 5/8". Four bolts required per vehicle. Replaces GM# 3688414
This stainless steel door hinge pin fits 1924-1933 Chevrolet cars & trucks. Dimensions: 1-13/16" Long x .245" OD. Replaces GM# 347621, 4250014
Specific Applications:
1929-1933 Chevy & GMC Trucks
For 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 Chevrolet Cars and Trucks
This door hinge pin is longer than necessary and must be cut down when installed. 4-1/16" long, 9/16 dia. head, .340" shank, and splines just below the head.
Specific applications:
1947-1955 (1st Series) Chevy & GMC Trucks (note: this pin is an oversize replacement for this application. Drill out to match);1955 (2nd Series) - 1987 Chevy & GMC Trucks (See also GM-1081K for pin & bushing kit)
This door hinge pin fits 1934-1946 Chevrolet & GMC trucks. This pin is made of STEEL and is approximately 2 5/16" long with an overall diameter of .275". Replaces GM# 460744
Specific Applications:
1937-1938 Single Units with Back Doors - Models 869, 871, 701, 703, 705
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This door hinge pin fits 1937-1953 Chevrolet & GMC trucks. This pin is made longer to mount accessory door mirrors. These are made in STEEL and are approximately 3" long with an outside diameter of .275". Replaces GM# 598653
Specific Applications:
1934-1946 All Trucks;1947-1953 COE (Cab-Over-Engine)
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
These hood hinge bolts fit 1947-1954 Chevrolet and GMC trucks as well as 1942-1948 Chevrolet Passenger vehicles. 4 bolts required per vehicle. Dimensions: 5/16"-24 Thread x 1-1/4" Long, Head 5/8" Hex, Shoulder 7/16" (.4375")
For 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This hood hinge hold down mounts to the radiator shell on 1932 Chevrolet Passenger cars and 1933 Chevy Trucks. This hold down is stamped in stainless. Made in the USA!
This is a set of chrome trunk hinges for left & right on 1937 Chevrolet Town Sedans & Sport Sedans. Dimensions: Bolt Centers - Short End: 1-3/8"; Long End: 2-3/4"; Overall Length: 8". Replaces GM# 4082100, 4082101
This is a pair of Chrome Trunk Hinges for 1938-1939 Chevrolet Sedans. Dimensions: Bolt Centers - Short End = 1-1/4"; Long End = 2-3/4", Overall Length: 8". Set for Right & Left. Fits . Replaces GM# 4082100, 4082101
Specific Applications:
1939 Pontiac - Style Numbers 39-2511, 2519;1939 Oldsmobile - Style Numbers 39-3511, 3519
This is a replacement Stainless Steel Door Hinge Pin for 1928-1956 Chevrolet passenger cars. Each pin comes with two bronze bushings. Dimensions: 2-3/8" Overall length, .340" Outside diameter. Note: 1931 & earlier cars do not use bushings. Replaces GM# 4023559
This is a Polished Stainless Steel Door Hinge Bolt for 1936-1940 Chevrolet passenger cars. It is a hex head bolt. Dimensions: 5/16 x 24 thread X 5/8" Long.
Now available are new trunk hinges for Chevrolet, Pontiac, Oldsmobile & Buick cars from 1940-1948. These hinges are chrome plated and ready to mount. Sold in a set for left and right. You can buy with confidence as we have been serving the hobby since 1979 and we are the manufacturer of this great item.
Specific Applications:
Will fit 1940 Chevy Coupe as a replacement - design is different.
PONTIAC: 1940-1941 Coupe - Style 2927;
1942-1948 Club Coupe, Business Coupe & Deluxe Club Sedan - Styles 3527, 3527B, 3527D
BUICK: 1940 Super & Roadmaster Sport Coupe & Convertible Coupe (Full Rear Seat) - Styles 4527C, 4567, 4727C & 4767
1942 Special Sport Coupe & Business Coupe - Styles 4227 & 4227B
Bolt Centers: Short End 2-3/4", Long End 2-3/4"; End to End Centers 8-1/4"; Overall Length of Hinges: 9-1/2". We have provided dimensions here so you are able to compare to your originals. Replaces GM#'s 4101842 & 4101843.
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a Lower Door Hinge Post Repair Panel for 1955-1959 (2nd Series) Chevrolet & GMC trucks. Repair panel comes with two caged nuts as original. Specify Right or Left when ordering.
This is a Lower Door Hinge Post Repair Panel for 1955-1959 (2nd Series) Chevrolet & GMC trucks. Repair panel comes with two caged nuts as original. Specify Right or Left when ordering.
This bolt & star washer fits all 1947-1955 Chevy & GMC trucks for the door hinges. Note: in 1955, used on 1st Series ONLY. Dimensions 3/8"-24 x 7/8". Replaces GM# 3685462, 4092154
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
This hood hinge fits all 1960-1966 Chevrolet & GMC trucks. Specify Right or Left when ordering. Order hood springs separately. Replaces GM# 3838689, 3838690
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This hood hinge fits all 1960-1966 Chevrolet & GMC trucks. Specify Right or Left when ordering. Order hood springs separately. Replaces GM# 3838689, 3838690
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a universal replacement for the center hood hinge on 1934-1935 Standard Chevrolet passenger cars. The Overall Length is 36-11/16". The width is 1-1/2" wide. Bolt centers are at 2-1/2". Note: This item must be modified to fit.
THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO SHIPPING.
This is a universal replacement for the center hood hinge on 1935 Master Chevrolet passenger cars. The Overall Length is 38-5/16". The width is 1-1/2" wide. Bolt centers are at 2-1/2". Note: This item must be modified to fit. THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO SHIPPING.
This door hinge assembly is for all 1955-1959 Chevrolet & GMC trucks. Note: in 1955, used on 2nd Series ONLY. This hinge will fit the left or right side - UPPER - 2 required per vehicle. Replaces GM# 3716441 & 3716442.
This door hinge assembly is for all 1955-1959 Chevrolet & GMC trucks. Note: in 1955, used on 2nd Series ONLY. This hinge will fit the left or right side - LOWER - 2 required per vehicle. Replaces GM# 3722703 & 3722704.
This is the UPPER door hinge assembly for 1967-1972 Chevrolet & GMC trucks - Series 10-30 & Blazer. Specify Left or Right when ordering Replaces GM# 3962515, 3962516
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is the UPPER door hinge assembly for 1967-1972 Chevrolet & GMC trucks - Series 10-30 & Blazer. Specify Left or Right when ordering Replaces GM# 3962515, 3962516
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is the LOWER door hinge assembly for 1967-1972 Chevrolet & GMC trucks - Series 10-30 & Blazer. Specify Left or Right when ordering Replaces GM# 3962519, 3962520
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is the LOWER door hinge assembly for 1967-1972 Chevrolet & GMC trucks - Series 10-30 & Blazer. Specify Left or Right when ordering Replaces GM# 3962519, 3962520
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This hood hinge fits 1973-1980 Chevrolet & GMC trucks, including CK 1,2,3, Blazer & Jimmy. Order hood hinge spring separately. Specify Right or Left when ordering. Replaces GM# 6262007 & 6262008
For 1973 1974 1975 1976 1977 1978 1979 1980 Chevrolet Trucks
This hood hinge fits 1973-1980 Chevrolet & GMC trucks, including CK 1,2,3, Blazer & Jimmy. Order hood hinge spring separately. Specify Right or Left when ordering. Replaces GM# 6262007 & 6262008
For 1973 1974 1975 1976 1977 1978 1979 1980 Chevrolet Trucks
This Hood Hinge fits all 1955-1957 (2nd Series) Chevrolet & GMC trucks. Specify Right or Left when ordering. Assembly comes with hinge spring installed. Replaces GM# 3732505, 3732506
This hood hinge fits all 1955-1957 (2nd Series) Chevrolet & GMC trucks. Specify Right or Left when ordering. Assembly comes with hinge spring installed. Replaces GM# 3732505, 3732506
This Hood Hinge fits all 1958-1959 Chevrolet & GMC trucks. Specify Right or Left when ordering. Assembly comes with hinge spring not installed. Replaces GM# 3744187, 3744188
This Hood Hinge fits all 1958-1959 Chevrolet & GMC trucks. Specify Right or Left when ordering. Assembly comes with hinge spring, not installed. Replaces GM# 3744187, 3744188
These hood hinge springs fit 1955-1957 Chevrolet & GMC cars & trucks. Dimensions: Coil 4-3/8" long x 1" Diameter, Overall length 6-1/2". Replaces GM# 3721015.
Specific Applications:
1955-1957 (2nd Series) Chevy & GMC trucks
This is a pair of hood hinge springs for 1958-1959 Chevrolet & GMC trucks. Dimensions: Coil 5-15/16 " long x 1-3/8" Diameter, Overall Length 8-3/4". Replaces GM# 3742926
A Universal CHROME Door Hinge Mirror that fits 1932-1935 Chevrolet passenger cars. This beautifully chrome plated mirror with straight arm is made to fit over hinges that are 2" high, or less. Mirror head is made in stainless steel and is 4" diameter. Mirror comes with special stainless hinge pin. Fits Left or Right.
NOTE: This mirror may not be suitable for mounting on the right side of some vehicles. Visibility on the right side can be limited due to the right hinge being too high or too low to be seen. We now offer a convex mirror head - VT-34X which works well for the right side to increase visibility.
Mounting this mirror requires drilling two small holes into the sheet metal hinge cover for the set screws.
This glove box door and hinge assembly fits all 1955 (2nd Series) - 1959 Chevrolet trucks. Comes with the glove box door, hinge assembly and door checks. Replaces GM# 3717855, 3712288, 3716483, 3716484