1913-28 Weatherstrip, for horizontally split windshields. Most 4-cylinder models. Almost universal application to open cars. Made to accommodate 1/4 glass. Approximately four (4) foot strip per windshield
For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 Chevrolet Cars and Trucks
This windshield seal fits 1949-1952 Chevrolet 2-Door Hardtop & Convertibles: Styles 1037 & 1067 with reveal molding . NO DIVISION BAR - FOR CUSTOM CARS ONLY. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding. This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that a one-piece windshield can be installed.
This windshield seal fits 1953-1954 Chevrolet Bel Air & 210 post coupes and all sedans, including station wagon & sedan delivery with reveal molding. Reveal molding is the stainless trim that inserts into the rubber windshield channel. Replaces GM# 4586871, 4601374, 4615789 This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases.
This windshield seal fits 1961-1962 Chevrolet Full size except Fleetmaster & Convertible. Also fits 1962 Full size passenger except Impala 2dr Hardtop & Convertible. For models with reveal molding. Reveal molding is the stainless trim that inserts into the rubber windshield channel. This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. Replaces GM# 4813438 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA.
This windshield regulator crank handle seal fits 1936-1938 Chevrolet & GMC truck. Installed in the dash where the crank-out windshield hand crank is mounted. Replaces GM# 304704 Sheet Metal Hole: 1-3/32" Center Hole: 7/8" Outside Diameter: 1-7/16" Slot Width: 1/16"
This is the door hinge pillar weatherstrip for 1959-1960 Impala Sport Coupe & Convertibles - Style #1837 & 1867. Found between the windshield A-pillar post and the front door opposite the vent window. Replaces GM# 4781937, 4781938, 4783928, 4793929.
This is the windshield seal for 1936 Chevrolet Convertibles - Style #1267. This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. Note: Requires divider bar seal, our part # 70-59. Includes installation instructions. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4064618. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This is a molded Cowl Vent Gasket for all 1947-1953 Chevrolet & GMC Trucks. Made in the USA by Steele Rubber, Inc. Replaces GM# 3682856 Specific Applications: 1947-1953 All Trucks; 1954-1955 (1st Series) Trucks with Flat Faced Cowl
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
1932-33 Gasket, cowl vent. 1/4 x 5/16 for 5 x 15 top cowl vent. Sponge type. Top quality. GM# 4023062 1932: All models with non-folding windshield. 1933: Sedan Delivery only and 1932-33 Trucks
This windshield seal fits all 1955 Chevrolet 150 Series passenger cars and sedan delivery. For windshields that do not have reveal molding. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. Replaces GM# 4657625 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits 1949-1952 Chevrolet passenger cars: Styles 1011, 1027, 1069,1271 models with reveal molding. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. Reveal molding is the stainless trim that inserts into the rubber windshield channel. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding. Replaces GM# 4573854, 4587340 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products, Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits 1940 Chevrolet passenger cars that do not have reveal molding - Series 1200 & 1500. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. Reveal molding is the stainless trim that inserts into the rubber windshield channel. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Replaces GM# 4099966 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits all 1940 Chevrolet passenger cars - Series 1000 - that have reveal molding. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Note: Designed to be used with reveal molding. Includes installation instructions. Replaces GM# 4099932 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits 1941-1948 Chevrolet passenger cars - Series 1000 with reveal molding except Style 1007 Aerosedan. Also requires 70-96 & 70-373 to complete installation. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. Reveal molding requires pinchweld seal 70-96. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Replaces GM# 4114860, 4122594 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This windshield seal fits 1941-1948 Chevrolet passenger cars - Series 1200 - models without reveal molding. Also requires 70-373 to complete installation. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Replaces GM# 4116260 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This windshield seal fits 1949-1952 Chevrolet Convertible & Hardtop models - Styles 1037 and 1067 with reveal molding. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative (reveal) molding. Fitted gasket provides a formed, seamless seal and accommodates reveal molding. Designed from original part so it fits correctly. Replaces GM# 4564079, 4573857 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products, Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits all 1937-1938 Chevrolet closed body cars. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Order division bar 70-159 separately. Replaces GM# 4073730, 4073737, 4089916 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This is the convertible top front bow-to-windshield outer seal that fits all 1955-1957 Chevrolet Convertibles. Extruded section of exact profile. Approximately four (4) foot nine (9) inches long. One (1) strip per car. Replaces GM# 4650077
This windshield seal fits 1953-1954 Chevrolet Convertibles & Hardtops - Styles 1037, 1037D & 1067, 1067D - models with reveal molding. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding. Fitted gasket provides a formed, seamless seal and accommodates reveal molding. Designed from original part so it fits correctly. Replaces GM# 4601373 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This convertible top to front bow seal fits all 1955-1957 Chevrolet convertibles. Fits the front bow to windshield, rear center section. Top quality sponge as original. Approximately forty six (46) inch strip for one car. Replaces GM# 4211195.
This windshield seal fits all 1955-1957 Chevrolet passenger cars - Series 210 and Bel Air (except convertible). This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding. Fitted gasket provides a formed, seamless seal and accommodates reveal molding. Designed from original part so it fits correctly. Replaces GM# 4663515. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits 1949-1952 Chevrolet passenger cars - Series 1200 (except 1207, 1208, 1271) - models without reveal molding. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4587341, 4587641. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This is the windshield header seal for 1949-1952 Chevrolet convertibles. The seal is the lower or rear, to the folding top front roof bow. Replaces GM# 4566232.
This windshield seal fits 1933-1935 Chevrolet passenger cars (except 1935 Master Deluxe). Note: 1933 Master cars had a stainless trim imbedded in the rubber seal. While this seal will replace the old one but it does not accept the stainless trim. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4045691. Specific Applications: 1933-1934: All closed models without reveal molding 1935: All series 1200 Standard Models without reveal molding Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits 1942-1948 Chevrolet Fleetline Aerosedan Style 1007 ONLY. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. This gasket requires external divider bar seal, part #70-373. Reveal molding requires pinchweld seal #70-96. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4125418. Order 70-96 & 70-373 separately. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits 1949-1951 Chevrolet Fleetline Special 2 and 4 door - No Reveal molding. Styles 1207 & 1208. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4585281. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits all 1958 Chevrolet passenger car models (except styles 1847 1867 & Corvette) This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding. Fitted gasket provides a formed, seamless seal and accommodates reveal molding. Designed from original part so it fits correctly. Replaces GM# 4714578. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits 1958 Chevrolet Impala 2-Door Hardtop - Style 1847 Only. This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding. Fitted gasket provides a formed, seamless seal and accommodates reveal molding. Designed from original part so it fits correctly. Replaces GM# 4714860. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield division bar gasket set fits all 1939 Chevrolet passenger cars. Two (2) piece set for inner and outer, molded with holes and pilots. This set is used with 70-601 vulcanized channel for complete windshield installation. All closed models. Replaces GM# 4089925, 4089926.
This windshield seal fits 1955-1957 Chevrolet Convertibles only. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the top edge's decorative molding. Replaces GM# 4650350 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits 1953-1954 Chevrolet Series 150 passenger cars including sedan delivery - no reveal molding. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4616205, 4616476 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.
This windshield seal fits 1935 & 1936 Chevrolet passenger cars. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4058826. Specific Applications: 1935: Chevolet Passenger Cars - Styles 1001, 1009, 1011, 1017, 1019, 1057 1936: All closed models Master & Standard Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. Order 70-59 division bar separately Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA.
1940-52 Weatherstrip, front bow-to-windshield, outer. Correct style to be attached to your original metal strip. Replaces #4563765 & 4563766 and other #s. (The metal strips changed in 49 but the rubber cross-section remained the same.) Approx. 4 ft-10 in long. All convertibles.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars
This is a Lower Windshield Mounting Weatherstrip for 1931-1934 Chevrolet Cabriolet & Landau Phaeton only. NOTE: this piece is 48 inches long and is made for Buick & Cadillac, which are larger autos. To be used on Chevy, this piece must be shortened in the middle to match the windshield frame. Works on 1931 Cabriolet & Landau Phaeton as a replacement piece. Replaces GM# 4034226
This rubber seal is a one-piece ring that fits on the outer edge of the windshield frame on all Chevrolet & GMC trucks with swing-out windshields. Top quality USA-Made rubber.
1963-64 All full size post models Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.
1937-48 Gasket, cowl vent. Replaces #4081958. Perfect copy of original, not a sponge substitute. Top quality material. All models including station wagons.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1941-48: All 1200 series cars without reveal molding. NO DIVISION BAR This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that the windshield can be "butted" together.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a windshield seal set for 1926-1931 Chevrolet passenger cars. Also fits other GM passenger cars with Fisher Bodies - Pontiac, Oldsmobile, Buick, Cadillac, Durant and Oakland - not for convertible models. Three piece set for the bottom and sides. Also order 4 ft. of 70-64 for the top seal - sold separately. Top quality rubber - Made in the USA!
This is a four piece set of rubber to seal the windshield on all 1932 Chevrolet closed cars with crank-up windshields. Set includes two side channels with felt covering, heavy lower seal that fits into the groove on the cowl below the windshield, and the long rubber seal that fits into the stainless trim on the top and sides.
1939: All Pass. NOTE: in 1939 models you must measure the developed length before ordering. This seal is 115" long but 1939 had three different lengths possible: 110", 112" & 115". Owners of 1939 models must specify length if you want anything other than 115". 1940: 1200 & 1500 series 1942-48 Fleetline AeroSedan 1007 without reveal molding - NO DIVISION BAR This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that the windshield can be "butted" together.
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Same applications as 25-47 no reveal This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that the windshield can be "butted" together.
The windshield channels are vulcanized one-piece units without division bar rubber molded into the ring. This is for "V-butt" custom installations only.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
1936 Seal, convertible top front bow-to-windshield with integral end pads. Made to fit Cadillac convertibles but can be adapted to other GM convertibles.
1942-48: Fleetline Aerosedan with reveal molding. NO DIVISION BAR. This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that the windshields can be "butted" together. Order separately 70-96 pinch weld seal for stainless trim.
1939 All closed bodies. Order 60-39 division bar separately Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.
1926-36 Seal, lower side window. Fastens to inner face of door to seal against outer side of glass. 1926-31 Seal. Crank-up windshield top. L-shaped strip fastens to windshield header facing glass to seal across top. Many models with crank-up windshield. Approximately four (4) feet required per windshield. Many models Fastens to windshield header facing glass to seal across top. Many models with crank-up windshields. Approx. 4ft. required per windshield.
For 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks
This is a rubber Windshield Seal for 1959-1960 Chevrolet Passenger cars with reveal molding. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Inc. These channels are of the highest quality authenticity and made in the USA. Replaces GM# 4757011, 4803019 Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield. Specific Applications: 1959: All models with revel molding 1960: All except Biscayne, Brookwood and Fleetmaster.
Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.
1963-64 Impala sport coupe (2-door hardtop) Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.
1963-64 Impala sport sedan (4-door hardtop) Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.
1962 Impala 2-door hardtop only Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.
1961-62 All full size convertibles Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.
1941-48: All 1000 series cars with reveal molding except 1007 Aerosedan. Custom cars only - NO DIVISION BAR This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that the windshield can be "butted" together. Order separately 70-96 pinch weld seal for stainless trim.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1941-48 Pinchweld seal, windshield, to seal and retain outer reveal molding. Used with our 70-1192. Twelve (12) foot strip. Also used with reveal molding vulcanized windshield seals. For all Fisher bodies.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1958 Gasket set, door handle. Six (6) piece set. 1/32 thick. Top quality rubber. For front doors of Bel Air, Biscayne, Delray and Yeoman 2-door station wagon.
This original style windshield wiper arm fits all 1925-1932 Chevrolet & GMC cars & trucks with vacuum wiper motors. It has a slotted tip to work with AF-340 wiper blades. Replaces GM# 343135 Specific Applications: 1925-1931 Chevy Passenger; 1925-1932 Chevrolet & GMC Trucks
For 1925 1926 1927 1928 1929 1930 1931 1932 Chevrolet Cars and Trucks
This windshield wiper blade is the original flat style blade used from 1925-1937 on Chevrolet & GMC car & trucks. Blade is 8 inches long and has a flat clip on the top designed to fit into the slotted opening on the wiper arm. Replaces GM# 985459
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 Chevrolet Cars and Trucks
This windshield wiper blade is the original flat style blade used from 1937-1948 on Chevrolet & GMC car & trucks. Blade is 9 inches long and has a flat clip on the top designed to fit into the slotted opening on the wiper arm. Replaces GM# 985429, 985982 Specific Applications: 1937-1948 Passenger cars; 1939-1946 Trucks
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars and Trucks
This is an original style flat windshield wiper blade for 1947-1953 Chevrolet & GMC trucks. The blade is 10 inches long and has a metal tab at the top to lock into original style slotted tip wiper arms. Replaces GM# 3683905
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a wiper blade insert refill for 1949-1955 Chevrolet & GMC cars & trucks. The blade refill is 11 inches long. Replaces GM# 373355, 557979 Specific Applications: 1949-1954 Passenger; 1954-1955 (1st Series) Chevy & GMC Trucks
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a wiper blade insert refill for 1955-1959 Chevrolet & GMC cars & trucks. The blade refill is 12 inches long. Replaces GM# 566510 Specific Applications: 1955-1957 Passenger; 1955-1959 (2nd Series) Chevy & GMC Trucks
For 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This wiper arm fits all 1932-1934 Chevrolet passenger cars and 1931-1938 Chevrolet & GMC trucks. Overall Length of this arm is 7-3/4". Replaces GM# 603047
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This complete windshield wiper blade fits 1949-1955 Chevrolet & GMC cars & trucks. The overall length of the blade is 11 inches long. Designed to fit with our TR-28 Wiper Arms. Replaces GM# 561094, 561268, 986882 Specific Applications: 1949-54 Chevrolet Passenger cars 1954-55 (1st Series) Chevy & GMC Trucks
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a stainless steel windshield wiper blade assembly for 1960-1966 Chevrolet & GMC trucks. The overall length of the blade is 13 inches. Replaces GM# 3819073, 3819072
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This complete windshield wiper blade fits 1959-1972 Chevrolet & GMC cars & trucks. The blade is 15 inches long and is Stainless Steel. Designed to fit with our AF-359 Wiper Arms. Replaces GM# 3819071, 3819074 Specific Applications: 1959-1964 Chevrolet Passenger cars 1967-1972 Chevy & GMC Trucks
For 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks
This polished stainless steel windshield wiper arm fits Chevrolet & GMC cars & trucks. The arm fits the left or right side. Replaces GM# 4917171, 3951915, 3951916, 3824127, 3824128, 3824129, 3824130 Specific Applications: 1961-64 Passenger cars 1967-72 Chevy or GMC Trucks
For 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks
This is a replacement LEFT CHROME windshield wiper arm for 1947-1953 Chevrolet & GMC Trucks. The end of the arm has a J hook end. Use with AF-362 wiper blade. Replaces GM# 3697281
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a replacement RIGHT CHROME windshield wiper arm for 1947-1953 Chevrolet & GMC Trucks. The end of the arm has a J hook end. Use with AF-362 wiper blade. Replaces GM# 3697282
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This replacement type Wiper Blade fits all 1947-1953 Chevrolet & GMC trucks. It is a newer design than originally came on these vehicles and is more stable in operation. Use with AF-360 & AF-361 Arms. Designed to be used with "J" style wiper arms. 10" Long. Replaces GM# 3683905
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a Brake Master Cylinder Cover Gasket for all 1937-1954 Chevrolet passenger cars. Dimensions: 3-1/8" x 2-1/16" overall. Made in the USA! Replaces GM# 5300973
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks