FAX: (541) 258-6968
 
598 Items
Showing 1 thru 100
Windshield Seals
Chevrolet Parts -  1914-1935 WINDSHIELD WEATHERSTRIP 1-1/2 INCH
19-24
USD $5.79 FT
CHEVROLET 1914-1935 WINDSHIELD WEATHERSTRIP 1-1/2 INCH
1914-35 Weatherstrip, largest type of T-rubber. 1-1/2” high. For many applications but especially between the windshield frame and cowl on open cars.

For 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks


Chevrolet Parts -  1913-1928 WINDSHIELD WEATHERSTRIP
19-5
USD $69.99 EA
CHEVROLET 1913-1928 WINDSHIELD WEATHERSTRIP
1913-28 Weatherstrip, for horizontally split windshields. Most 4-cylinder models. Almost universal application to open cars. Made to accommodate 1/4” glass. Approximately four (4) foot strip per windshield

For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 Chevrolet Cars and Trucks


Chevrolet Parts -  1950 OLDS 1-PIECE WINDSHIELD SEAL
25-33
USD $205.99 EA
CHEVROLET 1950 OLDS 1-PIECE WINDSHIELD SEAL
This windshield seal fits 1949-1952 Chevrolet 2-Door Hardtop & Convertibles: Styles 1037 & 1067 with reveal molding . NO DIVISION BAR - FOR CUSTOM CARS ONLY. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding. This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that a one-piece windshield can be installed.

For 1949 1950 1951 1952 Chevrolet Cars


Chevrolet Parts -  1953-1954 SEDAN WINDSHIELD SEAL-REVEAL
25-47
USD $190.59 EA
CHEVROLET 1953-1954 SEDAN WINDSHIELD SEAL-REVEAL
This windshield seal fits 1953-1954 Chevrolet Bel Air & 210 post coupes and all sedans, including station wagon & sedan delivery with reveal molding. Reveal molding is the stainless trim that inserts into the rubber windshield channel. Replaces GM# 4586871, 4601374, 4615789 This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases.

For 1953 1954 Chevrolet Cars


Chevrolet Parts -  1961-62 CAR WINDSHIELD VULCANIZED SEAL
27-55
USD $205.99 EA
CHEVROLET 1961-62 CAR WINDSHIELD VULCANIZED SEAL
This windshield seal fits 1961-1962 Chevrolet Full size except Fleetmaster & Convertible. Also fits 1962 Full size passenger except Impala 2dr Hardtop & Convertible. For models with reveal molding. Reveal molding is the stainless trim that inserts into the rubber windshield channel. This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. Replaces GM# 4813438 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA.

For 1961 1962 Chevrolet Cars

Windshield Bumpers
Chevrolet Parts -  1936-1938 PU WINDSHIELD REGULATOR SEAL
32-167
USD $6.79 EA
CHEVROLET 1936-1938 PU WINDSHIELD REGULATOR SEAL
This windshield regulator crank handle seal fits 1936-1938 Chevrolet & GMC truck. Installed in the dash where the crank-out windshield hand crank is mounted. Replaces GM# 304704 Sheet Metal Hole: 1-3/32" Center Hole: 7/8" Outside Diameter: 1-7/16" Slot Width: 1/16"

For 1936 1937 1938 Chevrolet Trucks

Door Weatherstrip
Chevrolet Parts -  1959-60 CONVT. WINDSHIELD POST SEAL
50-252
USD $181.99 PR
CHEVROLET 1959-60 CONVT. WINDSHIELD POST SEAL
This is the door hinge pillar weatherstrip for 1959-1960 Impala Sport Coupe & Convertibles - Style #1837 & 1867. Found between the windshield A-pillar post and the front door opposite the vent window. Replaces GM# 4781937, 4781938, 4783928, 4793929.

For 1959 1960 Chevrolet Cars

Windshield Seals
Chevrolet Parts -  1936 CONVERTIBLE WINDSHIELD SEAL
50-530
USD $239.99 EA
CHEVROLET 1936 CONVERTIBLE WINDSHIELD SEAL
This is the windshield seal for 1936 Chevrolet Convertibles - Style #1267. This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. Note: Requires divider bar seal, our part # 70-59. Includes installation instructions. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4064618. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1936 Chevrolet Cars

Cowl Vent Gaskets
Chevrolet Parts -  1947-53 TRUCK COWL VENT GASKET-RUBBER
60-124
USD $55.99 EA
CHEVROLET 1947-53 TRUCK COWL VENT GASKET-RUBBER
This is a molded Cowl Vent Gasket for all 1947-1953 Chevrolet & GMC Trucks. Made in the USA by Steele Rubber, Inc. Replaces GM# 3682856 Specific Applications: 1947-1953 All Trucks; 1954-1955 (1st Series) Trucks with Flat Faced Cowl

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1932-33 TOP COWL VENT GASKET
60-131
USD $42.49 EA
CHEVROLET 1932-33 TOP COWL VENT GASKET
1932-33 Gasket, cowl vent. 1/4” x 5/16” for 5” x 15” top cowl vent. Sponge type. Top quality. GM# 4023062 1932: All models with non-folding windshield. 1933: Sedan Delivery only and 1932-33 Trucks

For 1932 1933 Chevrolet Cars and Trucks

Windshield Seals
Chevrolet Parts -  1955 WINDSHIELD SEAL - NO REVEAL
60-133
USD $149.69 EA
CHEVROLET 1955 WINDSHIELD SEAL - NO REVEAL
This windshield seal fits all 1955 Chevrolet 150 Series passenger cars and sedan delivery. For windshields that do not have reveal molding. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. Replaces GM# 4657625 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1955 Chevrolet Cars


Chevrolet Parts -  1949-1952 CAR WINDSHIELD SEAL-REVEAL TYPE
60-150
USD $229.99 EA
CHEVROLET 1949-1952 CAR WINDSHIELD SEAL-REVEAL TYPE
This windshield seal fits 1949-1952 Chevrolet passenger cars: Styles 1011, 1027, 1069,1271 models with reveal molding. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. Reveal molding is the stainless trim that inserts into the rubber windshield channel. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding. Replaces GM# 4573854, 4587340 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products, Inc. These channels are of the highest quality and made in the USA.

For 1949 1950 1951 1952 Chevrolet Cars


Chevrolet Parts -  1940 WINDSHIELD SEAL - NO REVEAL
60-184
USD $199.19 EA
CHEVROLET 1940 WINDSHIELD SEAL - NO REVEAL
This windshield seal fits 1940 Chevrolet passenger cars that do not have reveal molding - Series 1200 & 1500. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. Reveal molding is the stainless trim that inserts into the rubber windshield channel. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Replaces GM# 4099966 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1940 Chevrolet Cars


Chevrolet Parts -  1940 WINDSHIELD SEAL - WITH REVEAL
60-185
USD $197.79 EA
CHEVROLET 1940 WINDSHIELD SEAL - WITH REVEAL
This windshield seal fits all 1940 Chevrolet passenger cars - Series 1000 - that have reveal molding. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Note: Designed to be used with reveal molding. Includes installation instructions. Replaces GM# 4099932 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1940 Chevrolet Cars


Chevrolet Parts -  1941-48 WINDSHIELD SEAL (W/REVEAL)
60-186
USD $137.99 EA
CHEVROLET 1941-48 WINDSHIELD SEAL (W/REVEAL)
This windshield seal fits 1941-1948 Chevrolet passenger cars - Series 1000 with reveal molding except Style 1007 Aerosedan. Also requires 70-96 & 70-373 to complete installation. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. Reveal molding requires pinchweld seal 70-96. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Replaces GM# 4114860, 4122594 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1941-48 WINDSHIELD SEAL (NO REVEAL)
60-187
USD $198.99 EA
CHEVROLET 1941-48 WINDSHIELD SEAL (NO REVEAL)
This windshield seal fits 1941-1948 Chevrolet passenger cars - Series 1200 - models without reveal molding. Also requires 70-373 to complete installation. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Replaces GM# 4116260 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1949-52 CONV'T/HT WINDSHIELD SEAL
60-194
USD $240.89 EA
CHEVROLET 1949-52 CONV'T/HT WINDSHIELD SEAL
This windshield seal fits 1949-1952 Chevrolet Convertible & Hardtop models - Styles 1037 and 1067 with reveal molding. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative (reveal) molding. Fitted gasket provides a formed, seamless seal and accommodates reveal molding. Designed from original part so it fits correctly. Replaces GM# 4564079, 4573857 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products, Inc. These channels are of the highest quality and made in the USA.

For 1949 1950 1951 1952 Chevrolet Cars


Chevrolet Parts -  1937-38 CAR WINDSHIELD SEAL
60-198
USD $152.49 EA
CHEVROLET 1937-38 CAR WINDSHIELD SEAL
This windshield seal fits all 1937-1938 Chevrolet closed body cars. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Order division bar 70-159 separately. Replaces GM# 4073730, 4073737, 4089916 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1937 1938 Chevrolet Cars

Convertible Top Seals
Chevrolet Parts -  1955-1957 FRONT BOW TO WINDSHIELD SEAL
60-200
USD $30.89 EA
CHEVROLET 1955-1957 FRONT BOW TO WINDSHIELD SEAL
This is the convertible top front bow-to-windshield outer seal that fits all 1955-1957 Chevrolet Convertibles. Extruded section of exact profile. Approximately four (4) foot nine (9) inches long. One (1) strip per car. Replaces GM# 4650077

For 1955 1956 1957 Chevrolet Cars

Windshield Seals
Chevrolet Parts -  1953-1954 HT/CONVT WINDSHIELD SEAL
60-222
USD $183.99 EA
CHEVROLET 1953-1954 HT/CONVT WINDSHIELD SEAL
This windshield seal fits 1953-1954 Chevrolet Convertibles & Hardtops - Styles 1037, 1037D & 1067, 1067D - models with reveal molding. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding. Fitted gasket provides a formed, seamless seal and accommodates reveal molding. Designed from original part so it fits correctly. Replaces GM# 4601373 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1953 1954 Chevrolet Cars

Convertible Top Seals
Chevrolet Parts -  195519-57 FRONT BOW TO WINDSHIELD SEAL
60-253
USD $30.19 EA
CHEVROLET 195519-57 FRONT BOW TO WINDSHIELD SEAL
This convertible top to front bow seal fits all 1955-1957 Chevrolet convertibles. Fits the front bow to windshield, rear center section. Top quality sponge as original. Approximately forty six (46) inch strip for one car. Replaces GM# 4211195.

For 1955 1956 1957 Chevrolet Cars

Windshield Seals
Chevrolet Parts -  1955-1957 CAR WINDSHIELD SEAL
60-266
USD $154.89 EA
CHEVROLET 1955-1957 CAR WINDSHIELD SEAL
This windshield seal fits all 1955-1957 Chevrolet passenger cars - Series 210 and Bel Air (except convertible). This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding. Fitted gasket provides a formed, seamless seal and accommodates reveal molding. Designed from original part so it fits correctly. Replaces GM# 4663515. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1955 1956 1957 Chevrolet Cars

Cowl Vent Gaskets
Chevrolet Parts -  1954-55(1ST) TRUCK COWL VENT GASKET-RUBBER
60-270
USD $58.49 EA
CHEVROLET 1954-55(1ST) TRUCK COWL VENT GASKET-RUBBER
This is a Molded Rubber Cowl Vent Seal for 1954-1955 (1st Series) Chevrolet & GMC trucks. Made as original and Made in the USA! Replaces GM# 3703560

For 1954 1955 Chevrolet Trucks

Windshield Seals
Chevrolet Parts -  1949-1952 WINDSHIELD SEAL - STYLELINE
60-286
USD $202.79 EA
CHEVROLET 1949-1952 WINDSHIELD SEAL - STYLELINE
This windshield seal fits 1949-1952 Chevrolet passenger cars - Series 1200 (except 1207, 1208, 1271) - models without reveal molding. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4587341, 4587641. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1949 1950 1951 1952 Chevrolet Cars


Chevrolet Parts -  1949-1952 WINDSHIELD HEADER SEAL-CONV
60-290
USD $238.99 EA
CHEVROLET 1949-1952 WINDSHIELD HEADER SEAL-CONV
This is the windshield header seal for 1949-1952 Chevrolet convertibles. The seal is the lower or rear, to the folding top front roof bow. Replaces GM# 4566232.

For 1949 1950 1951 1952 Chevrolet Cars

Cowl Vent Gaskets
Chevrolet Parts -  1934 ALL/1935 STD  COWL VENT GASKET
60-339
USD $42.89 EA
CHEVROLET 1934 ALL/1935 STD COWL VENT GASKET
1934-35 Gasket, cowl vent cover. 1934: All models 1935: Standard models

For 1934 1935 Chevrolet Cars

Windshield Seals
Chevrolet Parts -  1933-1935 CAR WINDSHIELD SEAL
60-366
USD $163.89 EA
CHEVROLET 1933-1935 CAR WINDSHIELD SEAL
This windshield seal fits 1933-1935 Chevrolet passenger cars (except 1935 Master Deluxe). Note: 1933 Master cars had a stainless trim imbedded in the rubber seal. While this seal will replace the old one but it does not accept the stainless trim. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4045691. Specific Applications: 1933-1934: All closed models without reveal molding 1935: All series 1200 Standard Models without reveal molding Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1933 1934 1935 Chevrolet Cars


Chevrolet Parts -  1942-1948 AEROSEDAN WINDSHIELD SEAL
60-376
USD $189.19 EA
CHEVROLET 1942-1948 AEROSEDAN WINDSHIELD SEAL
This windshield seal fits 1942-1948 Chevrolet Fleetline Aerosedan Style 1007 ONLY. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. This gasket requires external divider bar seal, part #70-373. Reveal molding requires pinchweld seal #70-96. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4125418. Order 70-96 & 70-373 separately. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1949-1951 WINDSHIELD SEAL - FLEETLINE
60-384
USD $234.89 EA
CHEVROLET 1949-1951 WINDSHIELD SEAL - FLEETLINE
This windshield seal fits 1949-1951 Chevrolet Fleetline Special 2 and 4 door - No Reveal molding. Styles 1207 & 1208. Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4585281. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1949 1950 1951 Chevrolet Cars


Chevrolet Parts -  1958 (EXC 2DR HT/CVT) WINDSHIELD SEAL
60-386
USD $180.79 EA
CHEVROLET 1958 (EXC 2DR HT/CVT) WINDSHIELD SEAL
This windshield seal fits all 1958 Chevrolet passenger car models (except styles 1847 1867 & Corvette) This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding. Fitted gasket provides a formed, seamless seal and accommodates reveal molding. Designed from original part so it fits correctly. Replaces GM# 4714578. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1958 Chevrolet Cars


Chevrolet Parts -  1958 IMPALA 2DR HARDTOP WINDSHIELD SEAL
60-387
USD $168.89 EA
CHEVROLET 1958 IMPALA 2DR HARDTOP WINDSHIELD SEAL
This windshield seal fits 1958 Chevrolet Impala 2-Door Hardtop - Style 1847 Only. This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding. Fitted gasket provides a formed, seamless seal and accommodates reveal molding. Designed from original part so it fits correctly. Replaces GM# 4714860. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1958 Chevrolet Cars

Windshield Division Bar
Chevrolet Parts -  1939 WINDSHIELD DIVISION BAR SEAL
60-39
USD $71.19 SET
CHEVROLET 1939 WINDSHIELD DIVISION BAR SEAL
This windshield division bar gasket set fits all 1939 Chevrolet passenger cars. Two (2) piece set for inner and outer, molded with holes and pilots. This set is used with 70-601 vulcanized channel for complete windshield installation. All closed models. Replaces GM# 4089925, 4089926.

For 1939 Chevrolet Cars

Windshield Seals
Chevrolet Parts -  1932-1935 LOWER WINDSHIELD SEAL  (4')
60-4
USD $81.89 EA
CHEVROLET 1932-1935 LOWER WINDSHIELD SEAL (4')
This is the lower windshield seal for 1932-1935 Chevrolet open cars - Roadster & Touring models. Four (4) foot strip.

For 1932 1933 1934 1935 Chevrolet Cars


Chevrolet Parts -  1955-57 CONVERTIBLE WINDSHIELD SEAL
60-410
USD $155.89 EA
CHEVROLET 1955-57 CONVERTIBLE WINDSHIELD SEAL
This windshield seal fits 1955-1957 Chevrolet Convertibles only. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the top edge's decorative molding. Replaces GM# 4650350 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1953-1954 150 SER. WINDSHIELD SEAL
60-423
USD $190.59 EA
CHEVROLET 1953-1954 150 SER. WINDSHIELD SEAL
This windshield seal fits 1953-1954 Chevrolet Series 150 passenger cars including sedan delivery - no reveal molding. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4616205, 4616476 Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality and made in the USA.

For 1953 1954 Chevrolet Cars


Chevrolet Parts -  1935M-36 ALL WINDSHIELD SEAL-NO REVEAL
60-432
USD $163.89 EA
CHEVROLET 1935M-36 ALL WINDSHIELD SEAL-NO REVEAL
This windshield seal fits 1935 & 1936 Chevrolet passenger cars. This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. Fitted gasket provides a formed, seamless seal. Designed from original part so it fits correctly. Replaces GM# 4058826. Specific Applications: 1935: Chevolet Passenger Cars - Styles 1001, 1009, 1011, 1017, 1019, 1057 1936: All closed models Master & Standard Refer to the Fisher Body Identification Plate on the firewall for specific Style number information. Order 70-59 division bar separately Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA.

For 1935 1936 Chevrolet Cars

Cowl Vent Gaskets
Chevrolet Parts -  1933 COWL VENT GASKET
60-44
USD $40.99 EA
CHEVROLET 1933 COWL VENT GASKET
1933 Gasket, cowl vent. Replaces #4034247 & 4034248. One piece sponge rubber, shear die cut to correct dimensions. All passenger models.

For 1933 Chevrolet Cars

Convertible Top Seals
Chevrolet Parts -  1940-52 FRONT BOW/WINDSHIELD SEAL
60-440
USD $72.59 EA
CHEVROLET 1940-52 FRONT BOW/WINDSHIELD SEAL
1940-52 Weatherstrip, front bow-to-windshield, outer. Correct style to be attached to your original metal strip. Replaces #4563765 & 4563766 and other #’s. (The metal strips changed in ‘49 but the rubber cross-section remained the same.) Approx. 4 ft-10 in long. All convertibles.

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars

Windshield Seals
Chevrolet Parts -  1939-46 TRUCK WINDSHIELD SEAL
60-447
USD $107.19 EA
CHEVROLET 1939-46 TRUCK WINDSHIELD SEAL
1939-46 Swing out windshields, seal on outer edge of frame.

For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks


Chevrolet Parts -  1931-1934 WINDSHIELD FRAME TO BODY SEAL
60-450
USD $209.99 EA
CHEVROLET 1931-1934 WINDSHIELD FRAME TO BODY SEAL
This is a Lower Windshield Mounting Weatherstrip for 1931-1934 Chevrolet Cabriolet & Landau Phaeton only. NOTE: this piece is 48 inches long and is made for Buick & Cadillac, which are larger autos. To be used on Chevy, this piece must be shortened in the middle to match the windshield frame. Works on 1931 Cabriolet & Landau Phaeton as a replacement piece. Replaces GM# 4034226

For 1931 1932 1933 1934 Chevrolet Cars


Chevrolet Parts -  1937-38 TRUCK WINDSHIELD SEAL
60-481
USD $115.69 EA
CHEVROLET 1937-38 TRUCK WINDSHIELD SEAL
This rubber seal is a one-piece ring that fits on the outer edge of the windshield frame on all Chevrolet & GMC trucks with swing-out windshields. Top quality USA-Made rubber.

For 1937 1938 Chevrolet Trucks

Gaskets & Seals
Chevrolet Parts -  1960-61 WIPER MOTOR CRANK CAP/SEAL
60-593
USD $46.59 EA
CHEVROLET 1960-61 WIPER MOTOR CRANK CAP/SEAL
1960-61 Pass. wiper motor crank seal (2-speed only)

For 1960 1961 Chevrolet Cars

Cowl Vent Gaskets
Chevrolet Parts -  1939-46 TRUCK COWL VENT GASKET
60-81
USD $54.29 EA
CHEVROLET 1939-46 TRUCK COWL VENT GASKET
This is a Molded Rubber Cowl Vent Seal for 1939-1946 Chevrolet & GMC trucks. Dimensions: 3-15/16" x 14-15/16". Replaces GM# 598925, 3681067

For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks

Windshield Post Weatherstrip
Chevrolet Parts -  1949-52 CONVT. WINDSHIELD POST SEAL
60-84
USD $163.89 PR
CHEVROLET 1949-52 CONVT. WINDSHIELD POST SEAL
Convertible Windshield post

For 1949 1950 1951 1952 Chevrolet Cars

Cowl Vent Gaskets
Chevrolet Parts -  1934-38 TRUCK COWL VENT GASKET
60-87
USD $42.59 EA
CHEVROLET 1934-38 TRUCK COWL VENT GASKET
1934-38 Gasket, cowl vent, lip type. Replaces #373398. Sponge rubber, for 3-7/8” x 15” cowl vent. All Truck.

For 1934 1935 1936 1937 1938 Chevrolet Trucks

Convertible Top Seals
Chevrolet Parts -  41-48 FRONT BOW TO WINDSHIELD SEAL
70-100
USD $64.19 EA
CHEVROLET 41-48 FRONT BOW TO WINDSHIELD SEAL
1941-48 Weatherstrip and pad, front bow-to-windshield, inner. Replaces #4084234 & #4114973. Approx. 4 ft-10 inch strip for one car. All convertibles.

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Windshield Seals
Chevrolet Parts -  1920-35 CAR/TRUCK WINDSHIELD SEAL - 1 INCH
70-1163
USD $5.79 FT
CHEVROLET 1920-35 CAR/TRUCK WINDSHIELD SEAL - 1 INCH
1920-30 Weather-strip. T-rubber. 1” high with 9/32” top. Various applications, earlier windshields.

For 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 Chevrolet Cars

Gaskets & Seals
Chevrolet Parts -  1935M-36 WIPER TRANSMISSION GASKETS
70-1196
USD $21.69 PR
CHEVROLET 1935M-36 WIPER TRANSMISSION GASKETS
1935M - 36 All Passenger

For 1935 1936 Chevrolet Cars

Windshield Seals
Chevrolet Parts -  1963-64 POST MODEL WINDSHIELD SEAL
70-1286
USD $242.39 EA
CHEVROLET 1963-64 POST MODEL WINDSHIELD SEAL
1963-64 All full size post models Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.

For 1963 1964 Chevrolet Cars

Convertible Top Seals
Chevrolet Parts -  31-35 FRONT BOW TO WINDSHIELD SEAL
70-137
USD $223.89 EA
CHEVROLET 31-35 FRONT BOW TO WINDSHIELD SEAL
1931-35 Weatherstrip, front bow to-windshield. Soft rubber, hollow body, proper screw holes, hinged flaps front and back. 1931: Landau Phaeton 1932-35: Most convertibles.

For 1931 1932 1933 1934 1935 Chevrolet Cars

Cowl Vent Gaskets
Chevrolet Parts -  1937-48 CAR COWL VENT GASKET
70-143
USD $56.59 EA
CHEVROLET 1937-48 CAR COWL VENT GASKET
1937-48 Gasket, cowl vent. Replaces #4081958. Perfect copy of original, not a sponge substitute. Top quality material. All models including station wagons.

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Windshield Seals
Chevrolet Parts -  1941-48 WINDSHIELD SEAL W/O DIV BAR
70-1534
USD $145.89 EA
CHEVROLET 1941-48 WINDSHIELD SEAL W/O DIV BAR
1941-48: All 1200 series cars without reveal molding. NO DIVISION BAR This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that the windshield can be "butted" together.

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1926-1931 GM CAR WINDSHIELD SEAL
70-16
USD $157.99 SET
CHEVROLET 1926-1931 GM CAR WINDSHIELD SEAL
This is a windshield seal set for 1926-1931 Chevrolet passenger cars. Also fits other GM passenger cars with Fisher Bodies - Pontiac, Oldsmobile, Buick, Cadillac, Durant and Oakland - not for convertible models. Three piece set for the bottom and sides. Also order 4 ft. of 70-64 for the top seal - sold separately. Top quality rubber - Made in the USA!

For 1926 1927 1928 1929 1930 1931 Chevrolet Cars


Chevrolet Parts -  1932 WINDSHIELD SEAL-4 PIECE SET
70-17
USD $167.79 SET
CHEVROLET 1932 WINDSHIELD SEAL-4 PIECE SET
This is a four piece set of rubber to seal the windshield on all 1932 Chevrolet closed cars with crank-up windshields. Set includes two side channels with felt covering, heavy lower seal that fits into the groove on the cowl below the windshield, and the long rubber seal that fits into the stainless trim on the top and sides.

For 1932 Chevrolet Cars


Chevrolet Parts -  39-48 CAR WINDSHIELD SEAL-NO NOTCH
70-1785
USD $163.89 EA
CHEVROLET 39-48 CAR WINDSHIELD SEAL-NO NOTCH
1939: All Pass. NOTE: in 1939 models you must measure the developed length before ordering. This seal is 115" long but 1939 had three different lengths possible: 110", 112" & 115". Owners of 1939 models must specify length if you want anything other than 115". 1940: 1200 & 1500 series 1942-48 Fleetline AeroSedan 1007 without reveal molding - NO DIVISION BAR This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that the windshield can be "butted" together.

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1949-52 CAR WINDSHIELD SEAL-NO REVEAL
70-1791
USD $216.59 EA
CHEVROLET 1949-52 CAR WINDSHIELD SEAL-NO REVEAL
Same applications as 25-47 no reveal This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that the windshield can be "butted" together.

For 1949 1950 1951 1952 Chevrolet Cars


Chevrolet Parts -  1947-53 WINDSHIELD SEAL W/O DIV BAR
70-1945
USD $124.99 EA
CHEVROLET 1947-53 WINDSHIELD SEAL W/O DIV BAR
The windshield channels are vulcanized one-piece units without division bar rubber molded into the ring. This is for "V-butt" custom installations only.

For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

Cowl Vent Gaskets
Chevrolet Parts -  1935-36 CAR COWL VENT GASKET
70-224
USD $67.99 EA
CHEVROLET 1935-36 CAR COWL VENT GASKET
1935-36 Gasket, cowl vent. Replaces #4060703. Original solid rubber configuration. Not a sponge substitute. 1935: Master Series 1936: All closed cars

For 1935 1936 Chevrolet Cars

Convertible Top Seals
Chevrolet Parts -  1936 FRONT BOW TO WINDSHIELD SEAL
70-46
USD $205.59 EA
CHEVROLET 1936 FRONT BOW TO WINDSHIELD SEAL
1936 Seal, convertible top front bow-to-windshield with integral end pads. Made to fit Cadillac convertibles but can be adapted to other GM convertibles.

For 1936 Chevrolet Cars

Windshield Seals
Chevrolet Parts -  1937-38 CADILLAC WINDSHIELD SEAL
70-566
USD $168.99 EA
CHEVROLET 1937-38 CADILLAC WINDSHIELD SEAL
1942-48: Fleetline Aerosedan with reveal molding. NO DIVISION BAR. This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that the windshields can be "butted" together. Order separately 70-96 pinch weld seal for stainless trim.

For Chevrolet Cars


Chevrolet Parts -  1939 CAR WINDSHIELD SEAL
70-601
USD $163.89 EA
CHEVROLET 1939 CAR WINDSHIELD SEAL
1939 All closed bodies. Order 60-39 division bar separately Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.

For 1939 Chevrolet Cars


Chevrolet Parts -  1926-36 WINDSHIELD/DOOR WINDOW SEAL
70-64
USD $5.69 FT
CHEVROLET 1926-36 WINDSHIELD/DOOR WINDOW SEAL
1926-36 Seal, lower side window. Fastens to inner face of door to seal against outer side of glass. 1926-31 Seal. Crank-up windshield top. L-shaped strip fastens to windshield header facing glass to seal across top. Many models with crank-up windshield. Approximately four (4) feet required per windshield. Many models Fastens to windshield header facing glass to seal across top. Many models with crank-up windshields. Approx. 4ft. required per windshield.

For 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks


Chevrolet Parts -  1959-60 CAR WINDSHIELD SEAL
70-671
USD $198.99 EA
CHEVROLET 1959-60 CAR WINDSHIELD SEAL
This is a rubber Windshield Seal for 1959-1960 Chevrolet Passenger cars with reveal molding. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Inc. These channels are of the highest quality authenticity and made in the USA. Replaces GM# 4757011, 4803019 Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield. Specific Applications: 1959: All models with revel molding 1960: All except Biscayne, Brookwood and Fleetmaster.

For 1959 1960 Chevrolet Cars


Chevrolet Parts -  1963-64 IMPALA H/T WINDSHIELD SEAL
70-731
USD $165.89 EA
CHEVROLET 1963-64 IMPALA H/T WINDSHIELD SEAL
Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.

For 1963 1964 Chevrolet Cars


Chevrolet Parts -  1929-32 LOWER WINDSHIELD SEAL
70-78
USD $88.99 EA
CHEVROLET 1929-32 LOWER WINDSHIELD SEAL
1963-64 Impala sport coupe (2-door hardtop) Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.

For 1929 1930 1931 1932 Chevrolet Cars


Chevrolet Parts -  1963-64 IMPALA WINDSHIELD SEAL
70-788
USD $172.79 EA
CHEVROLET 1963-64 IMPALA WINDSHIELD SEAL
1963-64 Impala sport sedan (4-door hardtop) Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield. Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.

For 1963 1964 Chevrolet Cars


Chevrolet Parts -  1962 IMPALA 2DR H/T WINDSHIELD SEAL
70-793
USD $193.99 EA
CHEVROLET 1962 IMPALA 2DR H/T WINDSHIELD SEAL
1962 Impala 2-door hardtop only Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.

For 1962 Chevrolet Cars


Chevrolet Parts -  1961-62 CONVERTIBLE WINDSHIELD SEAL
70-858
USD $181.29 EA
CHEVROLET 1961-62 CONVERTIBLE WINDSHIELD SEAL
1961-62 All full size convertibles Ready to install vulcanized windshield glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products Inc. These channels are of the highest quality authenticity and made in the USA. Division bars are molded into place when required in most cases. Note: when we refer to reveal molding we mean the stainless trim usually inserted in the windshield rubber that goes around the windshield.

For 1961 1962 Chevrolet Cars


Chevrolet Parts -  1939-40 CADILLAC WINDSHIELD SEAL
70-921
USD $178.29 EA
CHEVROLET 1939-40 CADILLAC WINDSHIELD SEAL
1941-48: All 1000 series cars with reveal molding except 1007 Aerosedan. Custom cars only - NO DIVISION BAR This windshield seal is for the street rodder or custom car builder. Molded without the division bar so that the windshield can be "butted" together. Order separately 70-96 pinch weld seal for stainless trim.

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1941-48 WINDSHIELD PINCHWELD SEAL
70-96
USD $74.89 EA
CHEVROLET 1941-48 WINDSHIELD PINCHWELD SEAL
1941-48 Pinchweld seal, windshield, to seal and retain outer reveal molding. Used with our 70-1192. Twelve (12) foot strip. Also used with reveal molding vulcanized windshield seals. For all Fisher bodies.

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Gaskets & Seals
Chevrolet Parts -  1963-72PU WIPER MOTOR/FIREWALL SEAL
AF-120
USD $4.95 EA
CHEVROLET 1963-72PU WIPER MOTOR/FIREWALL SEAL
This is the 1963-72 pickup wiper motor to firewall seal.

For 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks

Arms
Chevrolet Parts -  1959-60 SEDAN & WAGON WINDSHIELD WIPER ARM
AF-160L
USD $20.95 EA
CHEVROLET 1959-60 SEDAN & WAGON WINDSHIELD WIPER ARM
Sedan, wagon & El Camino (left)

For 1959 1960 Chevrolet Cars


Chevrolet Parts -  1959-60 SEDAN & WAGON WINDSHIELD WIPER ARM
AF-160R
USD $20.95 EA
CHEVROLET 1959-60 SEDAN & WAGON WINDSHIELD WIPER ARM
Sedan, wagon & El Camino (right)

For 1959 1960 Chevrolet Cars

Sending Unit Gaskets
Chevrolet Parts -  1961-66 CAR/1967-72 TRUCK FUEL SENDER GASKET
AF-162
USD $1.50 EA
CHEVROLET 1961-66 CAR/1967-72 TRUCK FUEL SENDER GASKET
Passenger fuel tank sender gasket

For 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks

Transmission Floor Cover Gaskets
Chevrolet Parts -  1955-59PU TRANS. COVER PLATE GASKET
AF-170
USD $10.00 SET
CHEVROLET 1955-59PU TRANS. COVER PLATE GASKET
Transmission cover gasket set

For 1955 1956 1957 1958 1959 Chevrolet Trucks

Mounting Hardware
Chevrolet Parts -  1958 PASSENGER DOOR HANDLE GASKET SET
AF-204
USD $5.95 SET
CHEVROLET 1958 PASSENGER DOOR HANDLE GASKET SET
1958 Gasket set, door handle. Six (6) piece set. 1/32” thick. Top quality rubber. For front doors of Bel Air, Biscayne, Delray and Yeoman 2-door station wagon.

For 1958 Chevrolet Cars


Chevrolet Parts -  1959 PASSENGER DOOR HANDLE GASKET SET
AF-205
USD $5.95 SET
CHEVROLET 1959 PASSENGER DOOR HANDLE GASKET SET
1959 Door Handle & Lock Pad Sets Sets for two (2) handles. All passenger cars

For 1959 Chevrolet Cars


Chevrolet Parts -  1960 PASSENGER DOOR HANDLE GASKET SET
AF-206
USD $5.95 SET
CHEVROLET 1960 PASSENGER DOOR HANDLE GASKET SET
Door Handle & Lock Pad Sets Sets for two (2) handles. All passenger cars

For 1960 Chevrolet Cars

Arms
Chevrolet Parts -  1959-60 HARDTOP WINDSHIELD WIPER ARM
AF-263L
USD $20.95 EA
CHEVROLET 1959-60 HARDTOP WINDSHIELD WIPER ARM
Hardtop models only (left)

For 1959 1960 Chevrolet Cars


Chevrolet Parts -  1959-60 HARDTOP WINDSHIELD WIPER ARM
AF-263R
USD $20.95 EA
CHEVROLET 1959-60 HARDTOP WINDSHIELD WIPER ARM
Hardtop models only (right)

For 1959 1960 Chevrolet Cars


Chevrolet Parts -  1925-1932CAR/PU WINDSHIELD WIPER ARM
AF-320
USD $8.95 EA
CHEVROLET 1925-1932CAR/PU WINDSHIELD WIPER ARM
This original style windshield wiper arm fits all 1925-1932 Chevrolet & GMC cars & trucks with vacuum wiper motors. It has a slotted tip to work with AF-340 wiper blades. Replaces GM# 343135 Specific Applications: 1925-1931 Chevy Passenger; 1925-1932 Chevrolet & GMC Trucks

For 1925 1926 1927 1928 1929 1930 1931 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  HAND OPERATED WIPER ARM & BLADE
AF-321
Wait List
CHEVROLET HAND OPERATED WIPER ARM & BLADE
Hand operated wiper arm with blade - chrome SHAFT .25 INCHES 6.35 mm

For All Chevrolet Cars and Trucks

Wiper Knobs
Chevrolet Parts -  1955-59 WIPER CONTROL KNOB - CHROME
AF-330
USD $11.95 EA
CHEVROLET 1955-59 WIPER CONTROL KNOB - CHROME
Truck - chrome knob

For 1955 1956 1957 1958 1959 Chevrolet Trucks

Blades
Chevrolet Parts -  1925-1937 WIPER BLADE-ORIGINAL TYPE
AF-340
USD $4.95 EA
CHEVROLET 1925-1937 WIPER BLADE-ORIGINAL TYPE
This windshield wiper blade is the original flat style blade used from 1925-1937 on Chevrolet & GMC car & trucks. Blade is 8 inches long and has a flat clip on the top designed to fit into the slotted opening on the wiper arm. Replaces GM# 985459

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 Chevrolet Cars and Trucks


Chevrolet Parts -  1937-1948 WIPER BLADE - ORIGINAL 9" LONG
AF-341
USD $4.95 EA
CHEVROLET 1937-1948 WIPER BLADE - ORIGINAL 9" LONG
This windshield wiper blade is the original flat style blade used from 1937-1948 on Chevrolet & GMC car & trucks. Blade is 9 inches long and has a flat clip on the top designed to fit into the slotted opening on the wiper arm. Replaces GM# 985429, 985982 Specific Applications: 1937-1948 Passenger cars; 1939-1946 Trucks

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars and Trucks


Chevrolet Parts -  1947-53 TRUCK WIPER BLADE-ORIGINAL TYPE
AF-342
USD $4.95 EA
CHEVROLET 1947-53 TRUCK WIPER BLADE-ORIGINAL TYPE
This is an original style flat windshield wiper blade for 1947-1953 Chevrolet & GMC trucks. The blade is 10 inches long and has a metal tab at the top to lock into original style slotted tip wiper arms. Replaces GM# 3683905

For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks


Chevrolet Parts -  1949-1955 11 INCH WIPER BLADE REFILL
AF-343
USD $5.95 EA
CHEVROLET 1949-1955 11 INCH WIPER BLADE REFILL
This is a wiper blade insert refill for 1949-1955 Chevrolet & GMC cars & trucks. The blade refill is 11 inches long. Replaces GM# 373355, 557979 Specific Applications: 1949-1954 Passenger; 1954-1955 (1st Series) Chevy & GMC Trucks

For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks


Chevrolet Parts -  12 INCH WIPER BLADE REFILL
AF-344
USD $5.95 EA
CHEVROLET 12 INCH WIPER BLADE REFILL
This is a wiper blade insert refill for 1955-1959 Chevrolet & GMC cars & trucks. The blade refill is 12 inches long. Replaces GM# 566510 Specific Applications: 1955-1957 Passenger; 1955-1959 (2nd Series) Chevy & GMC Trucks

For 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks

Arms
Chevrolet Parts -  1932-34CAR/1932-38 TRUCK W/S WIPER ARM
AF-345
USD $14.95 EA
CHEVROLET 1932-34CAR/1932-38 TRUCK W/S WIPER ARM
This wiper arm fits all 1932-1934 Chevrolet passenger cars and 1931-1938 Chevrolet & GMC trucks. Overall Length of this arm is 7-3/4". Replaces GM# 603047

For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks

Blades
Chevrolet Parts -  1949-54 CAR/1954-55 TRUCK WIPER BLADE
AF-346
USD $11.95 EA
CHEVROLET 1949-54 CAR/1954-55 TRUCK WIPER BLADE
This complete windshield wiper blade fits 1949-1955 Chevrolet & GMC cars & trucks. The overall length of the blade is 11 inches long. Designed to fit with our TR-28 Wiper Arms. Replaces GM# 561094, 561268, 986882 Specific Applications: 1949-54 Chevrolet Passenger cars 1954-55 (1st Series) Chevy & GMC Trucks

For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks


Chevrolet Parts -  1960-66 TRUCK WIPER BLADE ASSEMBLY
AF-347
USD $14.95 EA
CHEVROLET 1960-66 TRUCK WIPER BLADE ASSEMBLY
This is a stainless steel windshield wiper blade assembly for 1960-1966 Chevrolet & GMC trucks. The overall length of the blade is 13 inches. Replaces GM# 3819073, 3819072

For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks


Chevrolet Parts -  1959-64 CAR/1967-72 PU WIPER BLADE ASSEMBLY
AF-348
USD $13.95 EA
CHEVROLET 1959-64 CAR/1967-72 PU WIPER BLADE ASSEMBLY
This complete windshield wiper blade fits 1959-1972 Chevrolet & GMC cars & trucks. The blade is 15 inches long and is Stainless Steel. Designed to fit with our AF-359 Wiper Arms. Replaces GM# 3819071, 3819074 Specific Applications: 1959-1964 Chevrolet Passenger cars 1967-1972 Chevy & GMC Trucks

For 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks

Arms
Chevrolet Parts -  1961-72 CAR/TRUCK WIPER ARM - STAINLESS
AF-359
USD $15.95 EA
CHEVROLET 1961-72 CAR/TRUCK WIPER ARM - STAINLESS
This polished stainless steel windshield wiper arm fits Chevrolet & GMC cars & trucks. The arm fits the left or right side. Replaces GM# 4917171, 3951915, 3951916, 3824127, 3824128, 3824129, 3824130 Specific Applications: 1961-64 Passenger cars 1967-72 Chevy or GMC Trucks

For 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks


Chevrolet Parts -  1947-53 TRUCK LEFT  WIPER ARM - "J" TYPE
AF-360
Wait List
CHEVROLET 1947-53 TRUCK LEFT WIPER ARM - "J" TYPE
This is a replacement LEFT CHROME windshield wiper arm for 1947-1953 Chevrolet & GMC Trucks. The end of the arm has a “J” hook end. Use with AF-362 wiper blade. Replaces GM# 3697281

For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks


Chevrolet Parts -  1947-53 TRUCK RIGHT WIPER ARM - "J" TYPE
AF-361
USD $15.95 EA
CHEVROLET 1947-53 TRUCK RIGHT WIPER ARM - "J" TYPE
This is a replacement RIGHT CHROME windshield wiper arm for 1947-1953 Chevrolet & GMC Trucks. The end of the arm has a “J” hook end. Use with AF-362 wiper blade. Replaces GM# 3697282

For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

Blades
Chevrolet Parts -  1947-53 TRUCK WIPER BLADE "J" TYPE - 10" LONG
AF-362
USD $11.95 EA
CHEVROLET 1947-53 TRUCK WIPER BLADE "J" TYPE - 10" LONG
This replacement type Wiper Blade fits all 1947-1953 Chevrolet & GMC trucks. It is a newer design than originally came on these vehicles and is more stable in operation. Use with AF-360 & AF-361 Arms. Designed to be used with "J" style wiper arms. 10" Long. Replaces GM# 3683905

For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

Gaskets
Chevrolet Parts -  1937-54 MASTER CYLINDER COVER GASKET
AF-363
USD $1.65 EA
CHEVROLET 1937-54 MASTER CYLINDER COVER GASKET
This is a Brake Master Cylinder Cover Gasket for all 1937-1954 Chevrolet passenger cars. Dimensions: 3-1/8" x 2-1/16" overall. Made in the USA! Replaces GM# 5300973

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks


Chevrolet Parts -  1937-54 MASTER CYLINDER FILLER GASKET
AF-364
USD $2.25 EA
CHEVROLET 1937-54 MASTER CYLINDER FILLER GASKET
This is a master cylinder filler plug gasket for all 1937-1954 Chevrolet passenger cars. Dimensions: 3/4" ID x 7/8" OD. Replaces GM# 043234

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Rebuilding Service
Chevrolet Parts -  1935-54 VACUUM WIPER MTR REBUILDING SERVICE
AF-62
USD $175.00 EA
CHEVROLET 1935-54 VACUUM WIPER MTR REBUILDING SERVICE
Send in your original vacuum windshield wiper motor and allow 3-4 weeks. For 1919-34 see part number AF-281.

For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

License Light Lens Gaskets
Chevrolet Parts -  1959 CAR LICENSE LIGHT LENS GASKET
AF-625
Wait List
CHEVROLET 1959 CAR LICENSE LIGHT LENS GASKET
Passenger license light lens gasket

For 1959 Chevrolet Cars

598 Items
Showing 1 thru 100
Copyright ©2024 The Filling Station, LLC
E-mail: fssales@fillingstation.com