This is a pair of Plastic or Polished Stainless Steel Wind Deflectors designed to attach to vent windows on Chevrolet passenger cars & trucks. Specify Stainless or Color of Plastic when ordering. Replaces GM# 986149
These chrome plated bullets can be used for grilles, hubcaps, bumpers, or any other place your mind can imagine. Comes with center mounting stud molded into the back. 2-1/2" diameter x 1-3/4" high.
These chrome plated bullets can be used for grilles, hubcaps, bumpers, or any other place your mind can imagine. Comes with center mounting stud molded into the back. 2-1/2" diameter x 1-3/4" high.
These chrome plated bullets can be used for grilles, hubcaps, bumpers, or any other place your mind can imagine. Comes with center mounting stud molded into the back. 3" diameter x 2-13/16" high.
These chrome plated bullets can be used for grilles, hubcaps, bumpers, or any other place your mind can imagine. Comes with center mounting stud molded into the back. 2-1/2" diameter x 1-3/4" high.
Find the curb before your hubcaps do!! This 50's accessory will truly jog some memories. Easy installation, merely clamps onto the bottom of your fender.
This UNIVERSAL exhaust deflector is made in polished stainless steel. It is stamped with the Chevrolet Bowtie emblem. Though it is not an original item, it looks great and protects the paint finish on your car. Fits a variety of pipe diameters. Dimensions: Overall 8 1/4", widest point across the Bowtie end = 5 3/4" bolt on end 7 1/4, wraps around and intended to bolt into place.
This is a set of accessory illuminated fender guides with ivory colored heads. The posts are chrome plated and designed to clamp onto the underside of the front fenders. A classic 1930's & 1940's accessory to dress up your ride! Replaces GM# 985134
This is a steel reproduction of the fender skirts for 1949-1950 Chevrolet passenger cars. Skirts come with rubber seals. Replaces GM# 3693333, 3693334 Specific Applications: 1949-1950 Passenger models, including Station Wagon & Sedan Delivery; 1951-1952 Station Wagon & Sedan Delivery
This is a NOS (New Old Stock) GM Original Windshield Glareshades for 1949-1952 Chevrolet Fleetline models. This rare accessory gives a green tint to the top of the windshield to protect from the glare of the sun. Each pair of snap-in shades comes with an instruction sheet, two green plastic shades for left & right, and original colorful, but worn packaging. This set fits 1949-1952 Chevy Fleetline models only. GM# 986355
This is a pair of custom chrome headlight visors for 7" diameter headlights. This set comes with Chevrolet Bowtie Emblem. Mounts under the headlight trim ring.
This license topper is a reproduction of the classic 30's-40's era toppers, featuring a 48-star American flag. This ornament is made in the USA from pressure formed, die-cut aluminum.
License plate fasteners with glass jewels give that custom 50's look to your car. Available in Red, Amber, Blue or Green - Specify Color when ordering. Quality reflective glass jewels with aluminum backing with long bolt & nut. Sold in pairs.
This is a pair of stainless steel license plate frames. Tired of cheap plastic or bulky billet license frames? How about these slim, trim polished stainless steel frames? They fit current USA license plates. Button head stainless mounting hardware included. Dimensions: 12" x 6-1/4"
This is a license plate ornament known as the "SAFETY" STAR. It comes with a 12-volt LED Light. The ornament is chrome plated aluminum. Specify light color: Specify Red or Blue when ordering.
This is a license plate ornament known as the "SAFETY" STAR. It comes with a 12-volt LED Light. The ornament is chrome plated aluminum. Specify light color: Specify Red or Blue when ordering.
This beautiful reproduction of the early GM locking gas cap is a faithful copy of the 1940's style cap offered by GM dealers. It has "GM" embossed in the cap, is chrome and comes with two keys. This is all new tooling and a great item to dress up your car or truck! Retaining tabs are 1-7/8" wide, for gas neck with 1.53" opening. Replaces GM Factory Accessory #985076 Specific Applications: 1931-1952 Chevrolet Passenger; 1937-1970 Chevy & GMC trucks; 1930-1956 Buick; 1935-1940 Cadillac & LaSalle; 1934-1958 Oldsmobile; 1926-1957 Pontiac (most models).
These are Universal Custom Mirror Visors that fit over a 4” mirror head. They snap into place over the head of the mirror. Available in: S=Stainless Steel or Plastic in colors: A=Amber, B=Blue, G=Green, R=Red, or P=Purple. Specify when ordering.
This accessory Fulton Style Adjustable Outside Windshield Visor fits 1937-1953 Chevrolet cars and Chevy & GMC trucks. This reproduction is manufactured out of stamped steel and comes with plain steel adjustable brackets. Dimensions: 33" X 6" X 16", 18 pounds. Replaces GM# 986877 Specific Applications: 1937-1948 Passenger 1947-1953 Truck This part is oversize and special freight charges will apply. Call or email for a freight quote.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This accessory non-adjustable outside windshield visor fits 1949-1952 Chevrolet cars (except Hardtop & Convertible). The brackets are non-adjustable and must be screwed directly to the rain gutter on the car. Replaces GM# 986433 Specific Applications: 1949-1952 Passenger (exc. Hardtop or Convertible) This part is oversize and special freight charges will apply. Call or email for a freight quote.
This accessory one-piece outside windshield visor fits 1950-1952 Chevrolet Bel Air Hardtop only. It has stainless trim surrounding the visor and in the center. It must be screwed directly to the rain gutter on the car. Specific Applications: 1950-1952 Bel Air Hardtop only This part is oversize and special freight charges will apply. Call or email for a freight quote.
This accessory Outside Sun Visor fits 1937-1952 Chevrolet passenger cars WITH split windshields and drip rails. This steel visor with polished stainless accents clamps to the drip rails and windshield center center post, no drilling necessary. This part is adjustable in both length and height and can also be used on Buick, Ford, Dodge Chrysler, Pontiac and Oldsmobile cars with split windshields. This part is oversize and special freight charges will apply. Call or email for a freight quote.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars
This is a pair of Aluminum Running Board Step Plates for early Chevrolet & GMC cars & trucks. They have a Blue Bowtie Emblem in the center. Dimensions are 5-1/4" High x 10-7/8" long. Order mounting screws TR-184 separately.
These are a Polished Aluminum Step Plates with Boot Scraper rear edge. Protect your running boards with this classic style step plate with Chevrolet Bowtie in the middle. Dimensions: 8" deep X 8-3/4" wide X 2" high with mud scraper.
This is a Universal Guide Traffic Light Viewer for 1937-1959 Chevrolet & GMC cars & trucks. This viewer is needed when the vehicle is equipped with an accessory exterior sun visor. It aids in seeing the color of stop lights without having to lean down to view the high mounted signal lights. Can be used on any year or make of vehicle. Replaces GM# 986550 Specific Applications: 1937-1957 Passenger cars; 1947-1959 Trucks
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This is an Accessory Traffic Light Viewer for 1947-1959 Chevrolet & GMC cars & trucks. This viewer is needed when the vehicle is equipped with an accessory exterior sun visor. It aids in seeing the color of stop lights without having to lean down to view the high mounted signal lights. Can be used on any year or make of vehicle. Replaces GM# 986550 Specific Applications: 1949-1957 Passenger cars; 1947-1959 Trucks
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This 1950's novelty is that small finishing touch for your car. Valve stem covers are sold in a set of 4 pieces. Also check out the Dice License Plate Fasteners & Door Lock Knobs!
This 1950's novelty is that small finishing touch for your car. Valve stem covers are sold in a set of 4 pieces. Also check out the Dice License Plate Fasteners & Door Lock Knobs!
This 1950's novelty is that small finishing touch for your car. Valve stem covers are sold in a set of 4 pieces. Also check out the Dice License Plate Fasteners & Door Lock Knobs!
This 1950's novelty is that small finishing touch for your car. Valve stem covers are sold in a set of 4 pieces. Also check out the Dice License Plate Fasteners & Door Lock Knobs!
This 1950's novelty is that small finishing touch for your car. Valve stem covers are sold in a set of 4 pieces. Also check out the Dice License Plate Fasteners & Door Lock Knobs!
These chrome plated bullets can be used for grilles, hubcaps, bumpers, or any other place your mind can imagine. Comes with center mounting stud molded into the back. 2-1/2" diameter x 1-3/4" high.
These chrome plated bullets can be used for grilles, hubcaps, bumpers, or any other place your mind can imagine. Comes with center mounting stud molded into the back. 2-1/2" diameter x 1-3/4" high.
These chrome plated bullets can be used for grilles, hubcaps, bumpers, or any other place your mind can imagine. Comes with center mounting stud molded into the back. 2-1/2" diameter x 1-3/4" high.
This 1950's novelty is that small finishing touch for your car. Each pair of fasteners comes with hardware for mounting. Also check out the Dice Door Lock Knobs & Valve Stem Covers!
This 1950's novelty is that small finishing touch for your car. Each pair of fasteners comes with hardware for mounting. Also check out the Dice Door Lock Knobs & Valve Stem Covers!
This 1950's novelty is that small finishing touch for your car. Each pair of fasteners comes with hardware for mounting. Also check out the Dice Door Lock Knobs & Valve Stem Covers!
This 1950's novelty is that small finishing touch for your car. Each pair of fasteners comes with hardware for mounting. Also check out the Dice Door Lock Knobs & Valve Stem Covers!
This 1950's novelty is that small finishing touch for your car. Each pair of fasteners comes with hardware for mounting. Also check out the Dice Door Lock Knobs & Valve Stem Covers!
This 1950's novelty is that small finishing touch for your car. Each pair of fasteners comes with hardware for mounting. Also check out the Dice Door Lock Knobs & Valve Stem Covers!
This is a faithful copy of the factory accessory GM Telescoping License Plate Frame used in the late 1940's & 1950's. This clever setup will fit any size license plate. Tubular chrome sections have a slit that will slide over the edge of the license plate and slide together to trim out the edge perfectly! Eight piece set will trim out one license plate. Maximum plate dimensions: 16-1/2" x 9". Replaces GM# 986708