Disc Brake Bracket Kits
					
				
				
			
				
					
						
					
					
					 
					
					
					 CHEVROLET 1941-59PU DISC BRAKE CONV. KIT-5 LUG
					
						                                                       
						Convert your drum brake spindle truck to disc brakes with our bracket kit. A true bolt-on kit using the factory holes on the 1/2 ton spindle. Blanchard ground to exact specs. Allows for perfect caliper fit. Includes caliper brackets, tapered roller bearings, bearing adapters and mounting hardware. Requires 1970-77 Camaro rotors and calipers which can be purchased locally at most parts stores. 
						
						
						For  1941  1942  1944  1945  1946  1947  1948  1949  1950  1951  1952  1953  1954  1955  1956  1957  1958  1959  Chevrolet Trucks
						
				 
			
				
					 Disc Brake Conversion Kits
					
				
				
			
				
					
						
					
					
					 
					
					
					 CHEVROLET 1941-1959 TRUCK DISC BRAKE CONVERSION - 5 LUG
					
						                                                       
						Disc brake conversion kit for 1941-1959 Chevrolet & GMC 1/2 Ton Trucks. This kit contains everything at the spindle needed to change your 6-lug drum brakes to 5-lug on 4-3/4" GM passenger car bolt circle disc brakes while retaining the stock spindles. Kit includes 1969-74 Chevelle rotors, 1969-72 Camaro calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, brake hoses and banjo bolts. NOTE: 1941-50 trucks may need to drill out lower spindle hole from 7/16" to 1/2". This kit is heavy and special freight charges will apply. Call or email us for a freight quote. 
						
						
						For  1941  1942  1944  1945  1946  1947  1948  1949  1950  1951  1952  1953  1954  1955  1956  1957  1958  1959  Chevrolet Trucks
						
				 
			
				
					
 
				
				
			
				
					
						
					
					
					 
					
					
					 CHEVROLET 1947-59PU DISC BRAKE KIT NO M/CYL-6 LUG
					
						                                                       
						This is a 6-Lug Disc Brake Kit for 1947-1959 Chevrolet & GMC 1/2 Ton Trucks, Less Master Cylinder. Bolt pattern: 6 on 5-1/2" centers. The 6-lug disc brake kit contains all youll need to put modern discs on your stock 1/2 ton spindles, and uses your stock hub. The 1-1/4" thick, 12" rotor uses a GM full-floating caliper. . Notes: *Original 15 and 16 drum brake wheels will not work with this disc brake kit; must use "disc brake specific wheels. Verify fitment prior to installation. On some models (mostly 1947-48), the lower spindle holes will need to be drilled out from 7/16 to 1/2. If you are using the OE hubs, manufacturer strongly recommends the Roller Bearing Upgrade FS-216K. (It may be possible to clearance some 16 wheels, but we do not recommend modifying due to safety concerns.) Kit shown in photo is with optional upgrade drilled/slotted rotors at additional cost.  
						
						
						For  1941  1942  1944  1945  1946  1947  1948  1949  1950  1951  1952  1953  1954  1955  1956  1957  1958  1959  Chevrolet Trucks
						
				 
			
				
					
 
				
				
			
				
			
				
					 Disc Brake Valves
					
				
				
			
				
					
						
					
					
					 
					
					
					 CHEVROLET RESIDUAL PRESSURE VALVE, 10#
					
						                                                       
						For use on street rods when master cylinder is mounted below floor board. This valve prevents "bleed back" to the master cylinder.  
						
						
						For  1918  1919  1920  1921  1922  1923  1924  1925  1926  1927  1928  1929  1930  1931  1932  1933  1934  1935  1936  1937  1938  1939  1940  1941  1942  1944  1945  1946  1947  1948  1949  1950  1951  1952  1953  1954  1955  1956  1957  1958  1959  1960  1961  1962  1963  1964  1965  1966  1967  1968  1969  1970  1971  1972  1973  1974  1975  1976  1977  1978  1979  1980  1981  1982  1983  1984  1985  1986  1987  1988  1989  1990  1991  Chevrolet Cars and Trucks
						
				 
			
				
					
 
				
				
			
				
					
						
					
					
					 
					
					
					 CHEVROLET RESIDUAL PRESSURE VALVE, 2#
					
						                                                       
						For use on street rods when master cylinder is mounted below floor board. This valve prevents "bleed back" to the master cylinder. 
						
						
						For  1918  1919  1920  1921  1922  1923  1924  1925  1926  1927  1928  1929  1930  1931  1932  1933  1934  1935  1936  1937  1938  1939  1940  1941  1942  1944  1945  1946  1947  1948  1949  1950  1951  1952  1953  1954  1955  1956  1957  1958  1959  1960  1961  1962  1963  1964  1965  1966  1967  1968  1969  1970  1971  1972  1973  1974  1975  1976  1977  1978  1979  1980  1981  1982  1983  1984  1985  1986  1987  1988  1989  1990  1991  Chevrolet Cars and Trucks
						
				 
			
				
					
 
				
				
			
				
					
						
					
					
					 
					
					
					 CHEVROLET ADJ. BRAKE PROPORTIONING VALVE
					
						                                                       
						For use on street rods when changing to disc brakes. Will be necessary to balance pressure from front to rear brakes. 
						
						
						For  1918  1919  1920  1921  1922  1923  1924  1925  1926  1927  1928  1929  1930  1931  1932  1933  1934  1935  1936  1937  1938  1939  1940  1941  1942  1944  1945  1946  1947  1948  1949  1950  1951  1952  1953  1954  1955  1956  1957  1958  1959  1960  1961  1962  1963  1964  1965  1966  1967  1968  1969  1970  1971  1972  1973  1974  1975  1976  1977  1978  1979  1980  1981  1982  1983  1984  1985  1986  1987  1988  1989  1990  1991  Chevrolet Cars and Trucks