FAX: (541) 258-6968
 

Item ID: PA-54
Make: Chevrolet
Weight: 1.5000lbs.

POR-15® Metal Prep provides the best adhesion for POR-15® Rust Preventive Coating on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15® Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15® Rust Preventive Coating or any other coating. POR-15® Metal Prep is not caustic, corrosive, toxic or flammable.

POR-15® Metal Prep Features:

Interesting Facts you should know about steel and prepping it before you coat it with POR-15: In every car manufacturing facility, steel in different parts of the car body often comes from different steel mills and different production lots, and the surface texture varies with the condition of the steel mill rolls which cold roll the steel to its final thickness. Also, surface cleanliness varies with the mills cleaning procedures, especially the procedures used to control carbon smut is actually baked onto the steel during the high temperature annealing process which follows rolling. This carbon smut is impossible to remove except by mechanical abrasion. Rust varies with the care taken in handling (1) at the steel mill, (2) during transportation and storage, and (3) during fabrication. Steel stored for a long time with rust inhibiting oil will react to form an incomplete oxide known as oil stain. The result of all this is that ordinary steel varies widely in the manner in which it accepts coatings. Although some commercial steel provides an excellent surface for coatings, you are just as likely to find steel which gives poor adhesion and poor rust resistance, even with good coatings. Often the same mill will produce both very good and very poor surface quality, depending upon a number of uncontrolled factors. Nearly all the above problems can be overcome by using POR-15® Metal Prep before you coat your steel. POR-15® Metal Prep is an inexpensive insurance policy that guarantees perfect adhesion of POR-15® Rust Preventive Coating to any metallic surface every time. Whether you paint your car or your fence or your outdoor furniture, the problems are always the same, because you dont know anything about the steel youre painting or what mill it came from, and you cant learn anything by just looking at it even if you have perfect vision!
*NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.

This part fits most 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 Chevrolet Cars and Trucks.; exceptions may apply. Please read the complete description to see if this part fits your specific vehicle and application.


This product can expose you to a chemical, which is known to the State of California to cause cancer or reproductive harm.
For more information go to www.P65Warnings.ca.gov


PA-54
USD 47.95 EA
USD $47.95 EA

Copyright ©2024 The Filling Station, LLC
E-mail: fssales@fillingstation.com