This is a one piece, die-stamped 18 gauge steel rocker panel for 1940 Coupe & 2Dr. Sedan. Precise duplicate of the original factory curves & shapes, including the bead on top of the rocker. Fits the door curve properly. Panels extend completely from hinge pillar to rear door post. Specify Right or Left when ordering. Replaces GM# 4103091, 4103092
This is a one piece, die-stamped 18 gauge steel rocker panel for 1940 Coupe & 2Dr. Sedan. Precise duplicate of the original factory curves & shapes, including the bead on top of the rocker. Fits the door curve properly. Panels extend completely from hinge pillar to rear door post. Specify Right or Left when ordering. Replaces GM# 4103091, 4103092
This is a left hand 1961-64 factory type outer rocker panel. The panel is located below the door, lower fender section and front quarter panel section between the front and rear wheel wells. This panel fits all 2 door models.
This is a right hand 1961-64 factory type outer rocker panel. The panel is located below the door, lower fender section and front quarter panel section between the front and rear wheel wells. This panel fits all 2 door models.
This is a Rocker Repair Panel Set (3-pieces) for 1941-1948 Chevrolet 2-Door Passenger Cars. Specify Right or Left when ordering. These well-made, die-stamped 18 gauge steel panels duplicate factory curves & shapes, including the bead on top of the rocker. Panels extend completely from hinge pillar to rear post. Three pieces are included to form the rocker box. These are shipped loose for welding by the installer. This allows for custom fitting. Fits all 2-Door models includes Coupe, Sedan & Fleetline Aerosedan. Quality made parts Made in the USA!
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a Rocker Repair Panel Set (3-pieces) for 1941-1948 Chevrolet 2-Door Passenger Cars. Specify Right or Left when ordering. These well-made, die-stamped 18 gauge steel panels duplicate factory curves & shapes, including the bead on top of the rocker. Panels extend completely from hinge pillar to rear post. Three pieces are included to form the rocker box. These are shipped loose for welding by the installer. This allows for custom fitting. Fits all 2-Door models includes Coupe, Sedan & Fleetline Aerosedan. Quality made parts Made in the USA!
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a factory type outer rocker panel that fits 1956 & 1957 Chevrolet 4 door sedan and 4 door wagons. Be sure to pick up rocker end caps and fender brackets for a complete job. Specify Right or Left when ordering.
This is a factory type outer rocker panel that fits 1956 & 1957 Chevrolet 4 door sedan and 4 door wagons. Be sure to pick up rocker end caps and fender brackets for a complete job. Specify Right or Left when ordering.
This front roof filler panel brace fits 1955-1959 Chevrolet trucks. This brace is welded between the outer front of the roof skin and inner at the front above the windshield l for added support. In 1955 fits 2nd series only.
This is an Inner Roof Panel Front Section for 1967-1972 Chevrolet & GMC trucks. Dimensions: 56" x 9" x 6". Weight is 6 pounds. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This outer roof repair panel fits 1960-1966 Chevrolet and GMC Pickups. Dimensions: 65" x 44" x 3", Weight 29 lbs. This part is oversize and must be shipped via truck freight. Special freight charges will apply. Call or email us for a freight quote.
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This sealer is a gray colored, paintable, fast drying, flexible sealer used to seal body seams. Use to seal small cracks and other openings, such as drip rails, molding, cowling and welded seams. The heavy consistency makes this sealer especially suitable for vertical seams. Used by professionals for a quality job. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
Box of 60 - one foot pieces. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
Don't let that necessary spare tire get in the way. Keep your spare where it belongs. This 1955-1957 Chevrolet passenger cars spare tire well is the perfect solution. It fits all models except the wagon and sedan delivery.
This heavy sheet metal formed pan fits all 1955-1958 Chevrolet Cameo & GMC "Suburban" models with fiberglass beds. This panel attaches to the spare tire bucket. Dimensions: 14-1/2" x 32". Made in the USA! This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a direct replacement tail gate skin for the original part and fits the 1955-57 wagon models (except Nomad). Stamped in the USA, this is identical to the original, using the same gauge material. All of the holes and mounting locations are correct. SPECIAL FREIGHT CHARGES APPLY. Call or email for a freight quote.
This is a direct replacement for the original part and fits the 1955-57 nomad models. Stamped in the USA, this is identical to the original, using the same gauge material. All of the exterior chrome molding mounting holes, hinges and tail gate handle locations are correct. This tail gate will also fit the 1955-57 Pontiac Safari Wagon. SPECIAL FREIGHT CHARGES APPLY. Call or email for a freight quote.
This is a 1955-57 tail pan for all models except the wagon and sedan delivery. This tail pan will increase the structural integrity to your trunk area.
This is a 1955-57 tail pan brace that will fit all models except the wagon models. The brace is connected to the bottom of the tail pan for extra structural integrity in the rear trunk area.
This is a FRONT roll pan for 1981-1987 Chevrolet pickup. Custom truck feature - not stock. Measurement: 72" x 11" x 5". Weight 15 lbs. Bolt or weld in place. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This is the sheet metal panel below the trunk on 1931-1932 Chevrolet Trunk Model Coupes. NOTE: In 1931 models, used on models with flush mounted deck lid. Will not work on early models with exterior hinges, where lid sits on top of the deck lid opening.
Exterior sheet metal panel below trunk lid. A quality part, Made in USA! This item is oversize and special freight charges will apply. Call or email us for a freight quote.
Exterior sheet metal panel below trunk lid. A quality part, Made in USA! This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is the sheet metal panel below the rumble seat on 1931-1932 Chevrolet Sport Coupes. NOTE: In 1931 models, used on models with flush mounted deck lid. Will not work on early models with exterior hinges, where lid sits on top of the deck lid opening. Dimensions: 6-1/2" High x 40-1/2" Wide.
This is a 1939 Coupe Lower Trunk Tail Pan Panel. It is the exterior sheet metal panel below trunk lid. Die stamped for a precision fit, rolls under the rear body to the factory seam. Extends upward about 12 inches, goes from fender to fender and includes complete die-formed weatherstrip channel for a tight trunk seal. 18 gage steel. A quality part, Made in USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a 1939 Sedan Lower Trunk Tail Pan Panel. It is the exterior sheet metal panel below trunk lid. Die stamped for a precision fit, rolls under the rear body to the factory seam. Extends upward about 12 inches, goes from fender to fender and includes complete die-formed weatherstrip channel for a tight trunk seal. 18 gage steel. A quality part, Made in USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a 1937-1938 Coupe Lower Trunk Tail Pan Panel. It is the exterior sheet metal panel below trunk lid. Die stamped for a precision fit, rolls under the rear body to the factory seam. Extends upward about 12 inches, goes from fender to fender and includes complete die-formed weatherstrip channel for a tight trunk seal. 18 gage steel. A quality part, Made in USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a 1937-1938 Sedan Lower Trunk Tail Pan Panel. Does not fit Flat Back Sedan without trunk. It is the exterior sheet metal panel below trunk lid. Die stamped for a precision fit, rolls under the rear body to the factory seam. Extends upward about 12 inches, goes from fender to fender and includes complete die-formed weatherstrip channel for a tight trunk seal. 18 gage steel. A quality part, Made in USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.
1935-1936 Coupe & Sedan Lower Tail Pan Section. Fits the lower rear body section under the spare tire mount and rolls under the body. Includes correct body lines. Full width panel that extends upward 13 inches. Stamped in 18 gage steel. A quality part, Made in USA! Specific Applications: 1935 Master & All 1936 Coupes; 1935 Master & All 1936 Sedans without Trunks This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a 1940 Coupe Lower Trunk Tail Pan Panel. It is the exterior sheet metal panel below trunk lid. Die stamped for a precision fit, rolls under the rear body to the factory seam. Extends upward about 12 inches, goes from fender to fender and includes complete die-formed weatherstrip channel for a tight trunk seal. 18 gage steel. A quality part, Made in USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a 1940 Sedan Lower Trunk Tail Pan Panel. It is the exterior sheet metal panel below trunk lid. Die stamped for a precision fit, rolls under the rear body to the factory seam. Fits all 1940 Chevy 2 & 4 door Sedans and Sedan Delivery models. Extends upward about 12 inches, goes from fender to fender and includes complete die-formed weatherstrip channel for a tight trunk seal. 18 gage steel. A quality part, Made in USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.
1935 Master 2&4 door Sedans with trunk; 1936 Master & Standard 2&4 door Sedans with trunk. Exterior sheet metal panel below trunk lid. A quality part, Made in USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote..
1941-1948 Chevrolet Passenger Lower Roll Pan - Smoothie. This sheet metal panel is for all 1941-1948 body styles - a full Street Rod Smoothie Roll Pan for a great "no bumper" look. Die stamped from 18 gage steel. It is a full width panel, extending from fender to fender and starting at the bottom of the rear fenders. It goes up to one inch over the rear tail light and includes a full weatherstrip channel. The raised section for the tail light has been removed for the smooth look. To used the stock tail light, cut off the top 3 inches of the tail pan. It can also be used with the stock bumper and with or without the stock gravel shield. Custom bumper can be used for that cool Resto-Rod look! A quality part Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
