This original reproduction windshield wiper switch fits 1955-1956 Chevrolet passenger vehicles. This switch comes complete with a new stainless steel cable and sheath and can operate both electric and vacuum wiper motors. The body of this switch has a --3/16" overall depth.
NOTE: This switch is not compatible with the original 1955 accessory windshield washer kit.
Our modern vehicles have spoiled us to rely on the safety of intermittent wipers. Now you can have this "modern" convenience in your vintage car or truck. This switch is designed to work on all Newport Engineering wiper motors to make your old car as safe as your modern car.
This is the 1960-66 pickup wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick trough the cowl.
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is the 1960-66 pickup wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick trough the cowl.
This is the 1964 Passenger wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick through the cowl.
This is the 1967-72 pickup wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick trough the cowl.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is the 1954-55 1st Series pickup wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick trough the cowl. Overall length is 27-1/2" long.
This wiper motor transmission set fits VACUUM & ELECTRIC wiper motors in 1955-1959 Chevrolet and GMC trucks. The set includes the links and pivots from the wiper motor to the splined output shafts that the wiper arms attach to. In 1955, fits 2nd Series only. Fits left and right. Replaces GM# 3730483, 3722488
Specific Applications:
1958-1959 Trucks - Vacuum ONLY
This is the 1947-53 pickup wiper motor transmissions & linkage arms for left and right side. These are the linkage from wiper motor to the transmissions that stick trough the cowl. Replaces GM# 3697281, 3697282
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a pair of reproduction Wiper Transmissions (Left & Right) for all 1941-1948 Chevrolet passenger cars, including Sedan Delivery (exc. Station Wagon). These beautifully chromed wiper transmissions come with the linkages attached, ready to install. This is a replacement for 1941 models without rubber bushings. This set has rubber bushings. They include mounting brackets and gaskets. Right side has the long arm and left side a short arm. Replaces GM# 4114813, 4111814, 4125219, 4132644, 4132645
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1937 Chevrolet passenger car windshield wiper transmission & link assemblies. These beautifully chromed wiper transmissions come with the linkages attached, ready to install. Order wiper transmission mounting brackets & gaskets separately. These wiper transmissions can be modified to fit Buick, Olds & Pontiac by extending the length of the linkage arm. Replaces GM# 4073724 & 4073725
1938 Chevrolet passenger car windshield wiper transmission & link assemblies. These beautifully chromed wiper transmissions come with the linkages attached, ready to install. Order wiper transmission mounting brackets & gaskets separately. These wiper transmissions can be modified to fit Buick, Olds & Pontiac by extending the length of the linkage arm. Replaces GM# 4081915, 4081916
1939 Chevrolet passenger car windshield wiper transmission & link assemblies. These beautifully chromed wiper transmissions come with the linkages attached, ready to install. Order wiper transmission mounting brackets & gaskets separately. Modify to fit 1940 passenger cars by using original linkage arms with new chrome transmission heads. Replaces GM# 4089606, 4089607
In 1955, used on 2nd Series only. This kit completely replaces the factory wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash. Order this kit if you want standard two-speed wiper operation. Also available is the same kit with wiper delay switch - see PA-34D. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
In 1955, used on 2nd Series only. This kit completely replaces the factory wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash. Order this kit if you want wiper delayed, two-speed wiper operation. Also available is the same kit without wiper delay switch - see PA-34. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This kit completely replaces the factory wiper system. It comes with a 12 volt, two-speed electric motor.
Designed to fit in the stock location above the windshield. Also available is a wiper delay switch - see PA-10.A top quality product Made in the USA!
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
NOTE: 1936 fits Low Roof Cabs ONLY.
Complete with bracketing, linkage arms, wiper transmissions, wiper arms & blades, wiring and switch.
A top quality product Made in the USA!
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch.Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want standard two-speed wiper operation. Also available is the same kit with wiper delay switch - see PA-31D. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This kit completely replaces the factory type "spool & cable" wiper system.
Cross-mount master cylinders will not fit with our RainGear system installed.
The kit comes complete less assembly lube, arms and blades, escutcheons and model-specific knobs for the switch. All those stock pieces will fit on our system. Escutcheons are the exterior trim bezels which cover the pivot posts in the cowl. Note that the original escutcheons are required and are not available as an aftermarket item to the best of our knowledge.
Please note that the RainGear unit cannot be controlled by any General Motors column-mounted wiper switches. You must use the included switch. This is due to the fact that GM switches control the wiper motor via the ground wire and our systems must be controlled by switching the positive wire.
In 1955, used on 1st Series only. DO NOT USE WITH IN-DASH RADIO. This kit completely replaces the factory vacuum wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash.
Original radios in the upper dash board mount location will not clear our system. We have one report of an aftermarket radio interfering as well.
Please note that the RainGear unit cannot be controlled by any General Motors column-mounted wiper switches. You must use the included switch. This is due to the fact that GM switches control the wiper motor via the ground wire and our systems must be controlled by switching the positive wire.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch.Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want wiper delayed, two-speed wiper operation. Also available is the same kit without wiper delay switch- see PA-31. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This kit completely replaces the factory type "spool & cable" wiper system.
Cross-mount master cylinders will not fit with our RainGear system installed.
The kit comes complete less assembly lube, arms and blades, escutcheons and model-specific knobs for the switch. All those stock pieces will fit on our system. Escutcheons are the exterior trim bezels which cover the pivot posts in the cowl. Note that the original escutcheons are required and are not available as an aftermarket item to the best of our knowledge.
Please note that the RainGear unit cannot be controlled by any General Motors column-mounted wiper switches. You must use the included switch. This is due to the fact that GM switches control the wiper motor via the ground wire and our systems must be controlled by switching the positive wire.
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch.Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want standard two-speed wiper operation. Also available is the same kit with wiper delay switch - see PA-32D. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
In 1955, used on 1st Series only. DO NOT USE WITH IN-DASH RADIO. This kit completely replaces the factory vacuum wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions,wiring and switch. Designed to fit neatly under the dash.
Original radios in the upper dash board mount location will not clear our system. We have one report of an aftermarket radio interfering as well.
Please note that the RainGear unit cannot be controlled by any General Motors column-mounted wiper switches. You must use the included switch. This is due to the fact that GM switches control the wiper motor via the ground wire and our systems must be controlled by switching the positive wire.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch.Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want wiper delayed, two-speed wiper operation. Also available is the same kit without wiper delay switch- see PA-32. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This Raingear Wiper System fits 1967-1972 Chevrolet pickups. This kit mounts inside of the airbox, which is located beneath the cowl panel on the outside of the truck, below the windshield. The relocation of this kit to the airbox from the original position under the dash frees up space under the dash to accommodate a computer when doing an LS swap. This kit features a 12 volt, ten amp, two-speed electric motor and comes complete to work with your original wiper arms, blades, switch bezel and switch knob. NOTE: When installing this kit you will need to install a passenger side defroster duct, on the driver side to allow room for the new switch and wiring. For a kit including a wiper delay switch, see PA-37D. Made in the USA!
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This Raingear Wiper System WITH WIPER DELAY SWITCH fits 1967-1972 Chevrolet pickups. This kit mounts inside of the airbox, which is located beneath the cowl panel on the outside of the truck, below the windshield. The relocation of this kit to the airbox from the original position under the dash frees up space under the dash to accommodate a computer when doing an LS swap. This kit features a 12 volt, ten amp, two-speed electric motor and comes complete to work with your original wiper arms, blades, switch bezel and switch knob. NOTE: When installing this kit you will need to install a passenger side defroster duct, on the driver side to allow room for the new switch and wiring. For a kit without a wiper delay switch, see PA-37. Made in the USA!
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
These wiper transmission hold down chrome nuts mount on the wiper transmissions to mount them on the cowl. These fit all 1947-1959 Chevrolet & GMC trucks.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
This is a Trico Vcauum Windshield Wiper Motor Rebuild Kit for 1925-1931 Chevrolet & GMC. For vacuum wiper motors - Models KCX, KSB, KSL motors with 1" wide bowls and snap on style covers. Includes paddle and parking seals, bowl gaskets, rivets, grease capsule, grease applicator, and instructions. Made in the USA!
We also offer a rebuilding service for your original Trico vacuum wiper motor.
For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks
These wiper savers are a chrome bullet that fits over the wiper transmission splines for displaying at car shows. Sold in pairs, they have a set screw to hold them in place. Approximate Height 1.5"
This is a pair of Wiper Savers - Custom Chrome Caps for any vehicle. Made specifically to remove windshield wiper arms & blades for car shows. Super nice chrome plating. Made in the USA!
These windshield wiper transmission brackets fit behind the wiper transmission on 1938-1939 Chevrolet passenger cars. This set includes two brackets, two bolts and two star washers. Replaces GM# 4081917
These windshield wiper transmission brackets fit behind the wiper transmission on 1937 Chevrolet passenger cars. This set includes two brackets, two bolts and two star washers. Replaces GM# 4073726
This is a universal 6-VOLT Windshield Wiper Motor with Stainless Housing - NO SWITCH. This motor requires an external control switch to operate. NOTE: This motor will not work on GM vehicles with crank up windshields unless the crank mechanism is permanently removed.
The shaft is 5" long and the kit includes instructions for shortening the shaft. The wiper motor has an automatic self-parking feature and a 110 degree sweep
For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade.
For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
THE SHAFT IS 5" LONG AND INCLUDES INSTRUCTIONS FOR SHORTENING THE SHAFT. THIS WIPER MOTOR HAS AN AUTOMATIC SELF PARK AND A 110 DEGREE SWEEP. USE WITH WIPER ARMS VT-60, VT-61, VT-64, OR VT-65 AND WIPER BLADES VT-62, VT-63, VT-66, AF-341SR, OR VT-67.
This is a universal 6-VOLT Windshield Wiper Motor with Black Housing - BUILT-IN ON/OFF SWITCH.
For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
This is a universal 12-VOLT Windshield Wiper Motor with Black Housing - BUILT-IN ON/OFF SWITCH.
For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
This is a universal 6-VOLT Windshield Wiper Motor with Stainless Housing - NO SWITCH. This motor requires an external control switch to operate. The kit comes with an adjustable length SLOTTED Adjustable Wiper Arm that is 7-1/4" to 8-1/2" long from the pivot attachment. Slot Style Wiper blade included in the kit is 8" long.
The shaft is 5" long and the kit includes instructions for shortening the shaft. The wiper motor has an automatic self-parking feature and a 110 degree sweep
For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade.
For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
This is a Universal 12-Volt Wiper Motor with Stainless Housing. Motor comes with wiper arm and blade. The shaft is 5" long and includes instructions for shortening the shaft. This wiper motor has an automatic self park and a 110 degree sweep. Motor overall depth is 3-1/4". For replacement wiper arms see VT-60, VT-61, VT-64 or VT-65. Replacement wiper blades see VT-62, VT-63, VT-66, AF-341SR or VT-67. NOTE: WILL NOT WORK ON EARLY GM VEHICLES WITH CRANK-UP WINDSHIELDS.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
In 1955, fits 1st Series only. This high quality electric replacement is a direct bolt - in for your original vacuum motor. A big improvement over the motors that were previously available - this motor is a 2-speed heavy duty motor. It also has an automatic park position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! Complete with wiring harness. Note: If you are using original wiper transmission linkage with this motor, you must remove the bushing in the end of the transmission linkage and use the nylon bushings included with the wiper motor kit.
This high quality electric replacement is a direct bolt - in for your original vacuum motor. A big improvement over the motors that were previously available - this motor is a 2-speed heavy duty motor. It also has an automatic park position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! Complete with wiring harness. Note: If you are missing the original clip that holds the wiper transmission arms to the motor, order either the GR-87 or GR-87A separately,as this is not included in the motor kit.
This high quality electric wiper motor fits all 1947-1953 Chevrolet trucks. Made in the USA by Newport Engineering, it is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
Motor mounts in stock location under the dash using stock linkage and transmissions. This unit will not clear the stock CHOKE CABLE. The two speed switch provided will mount in stock location but the purchaser must adapt stock knob. *The delay switch will not mount in the stock location.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
In 1955, used on 2nd Series Only. This high quality electric wiper motor is made in the USA by Newport Engineering.It is a direct bolt-in replacement for your original vacuum or electric wiper motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
NOTE! THIS MOTOR WILL ONLY REPLACE AN ORIGINAL VACUUM MOTOR. IF YOU HAD AN ELECTRIC MOTOR IN YOUR TRUCK, THIS WILL NOT WORK UNLESS YOU CHANGE TO VACUUM MOTOR WIPER LINKAGE (See RW-885) This high quality electric wiper motor is made in the USA by Newport Engineering.It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
Note: In 1955 trucks, used on 1st Series only.
It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
This high quality 12 Volt electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch. Made in the USA! NOTE: Will not work with Factory Radio.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.NOTE: Will not work with Factory Radio.
Fits 1935 Master Passenger cars & All 1936 Passenger cars. This high quality electric wiper motor is made in the USA by Newport Engineering.
NOTE: Will not work with Factory Radio.
**THERE ARE 2 DIFFERENT MOTORS FOR THIS SERIES OF TRUCK, ONE MOTOR LAYS FLAT ON THE FIREWALL (PA-26F) AND THE OTHER STICKS OUT TOWARDS THE SEAT(PA-26). This high quality electric wiper motor is made in the USA by Newport Engineering.It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
It's here! Finally a true bolt-in replacement for your 1960 Chevrolet Cars. The Clean Wipe Wiper Drive for the 60 Chevy is a high tech motor replacement for the O.E.M. electric motor. We use an extremely heavy duty factory tested 2-speed motor that is smaller than the original, giving you more room for that big block or after-market ignition system. The kit mounts in the factory mounting position, hooks up to the original linkage and transmissions, and comes with all the mounting hardware. It can also be easily upgraded to full intermittent delay wipers.
It's here! Finally a true bolt-in replacement for your 1961-62 Chevrolet Cars. The Clean Wipe Wiper Drive for the 61-62 Chevy is a high tech motor replacement for the O.E.M. electric motor. We use an extremely heavy duty factory tested 2-speed motor that is smaller than the original, giving you more room for that big block or after-market ignition system. The kit mounts in the factory mounting position, hooks up to the original linkage and transmissions, and comes with all the mounting hardware. It can also be easily upgraded to full intermittent delay wipers.
It's here! Finally a true bolt-in replacement for your 1963-64 Chevy Impala, Bel-Air, and Biscayne. The Clean Wiper Wiper Drive for the 63-64 Chevy is a high tech motor replacement for the O.E.M. electric motor. We use an extremely heavy duty factory tested 2-speed motor that is smaller than the original, giving you more room for a power brake booster or almost any after-market part. The kit mounts in the factory mounting position, hooks up to the original linkage and transmissions, and comes with a 2-speed rotary switch and all the mounting hardware. It can be easily upgraded to full intermittent delay wipers with the addition of our Intermittent Delay Switch.
This high quality electric wiper motor fits all 1947-1953 Chevrolet trucks. Made in the USA by Newport Engineering, it is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
Motor mounts in stock location under the dash using stock linkage and transmissions. This unit WILL clear the stock CHOKE CABLE. The two speed switch provided will mount in stock location but the purchaser must adapt stock knob. *The delay switch will not mount in the stock location.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks