1929-1934 Starter Drive Lock Tab Washer. Dimensions: 5/16" ID x 5/8" OD. Fits Chevrolet cars & trucks. Replaces GM# 806427 Specific Applications: 1929-1933 All cars & trucks; 1934 Standard Passenger (Models DC) only
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 Chevrolet Cars and Trucks
Note: the correct finish on these screws is nickel plating. Stainless is the best replacement we can find. Set consists of 4 wood screws and 4 large head machine screws. To install the 4 machine screws, first re-tap the holes in the mounting bracket to 1/4-20.
This is a set of 8 stainless steel sheet metal screws to mount the lower cab step seal retainer on all 1950-1955 (1st Series) Chevrolet & GMC trucks. Screws are oval head, phillips enough for two retainers.
For 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a Stainless Oval Head, Slotted Wood Door Hinge Screw for 1926-1936 Chevrolet passenger cars. The dimensions are 1/4"-20 x 3 inches. This screw is intended to go through the hinge and all the way through the wood door post. There is one of these through bolts on two or more of the door hinges on early Chevrolet passenger cars. Check the thickness of your door post before ordering.
For 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars
This set contains Phillips pan head screws with a star washer below the head. If you require a clutch head screw, please order part #GM-1251, which is sold individually. SET OF 8 SCREWS & 8 STAR WASHERS. SCREWS ARE 1/4'-20 X 3/4" PAN HEAD.
For 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
This is a CHROME Screw to retain the Windshield Crank Handle on 1940-1946 Chevrolet & GMC Trucks . It is a fillister head screw 1-3/8" long to mount the crank handle onto the windshield crank mechanism in the dash.
For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a set of door latch mounting screws for 1960-1972 Chevrolet & GMC trucks. Set includes 6 screws 5/16-18 x 3/4 countersunk, phillips screws and 6 countersunk lock washers.
For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This Screw Set is for the Door Hinge Access Plates on 1947-1955 (1st Series) Chevrolet & GMC trucks. This 10 piece set is enough for both access plates.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
These polished stainless steel door striker screws fit all 1937-1948 Chevrolet passenger cars. Set of four pieces for two doors. Dimensions: 1/4-28 x 3/4" Long. Replaces GM# 4074901, 4099249, 4132281
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1955-1966 Chevrolet & GMC Truck Door Panel Screw Kit - 26-Piece Kit Stainless Steel - Includes Screws For Both LH and RH Door Panels- Replaces GM# 456914
This #6 Stainless Steel screw is used as an alternative to staples when securing the beltline felts to the door frame. This screw is self tapping and does not require pre-drilling. Specify FLAT HEAD or PAN HEAD when ordering.
This #6 Stainless Steel screw is used to secure the beltline felts to the door frame. This screw is self tapping and does not require pre-drilling. Specify FLAT HEAD or PAN HEAD when ordering.
This screw has multiple uses on all 1929-1954 Chevrolet & GMC cars & trucks. It is used on the front engine plate to block mounting. Three screws are required per engine. It is also used on the rear of water pumps to mount the back plate to the water pump housing. 5/16-18 thread x 1/2" countersunk flat head slotted screw. Head diameter 9/16". Replaces GM# 133822 Specific Applications: 1929-1954 Chevrolet & GMC cars & trucks - FRONT ENGINE PLATE MOUNTING 1937-1954 Chevfolet & GMC cars & trucks - REAR WATER PUMP PLATE MOUNTING
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This is a Stainless Steel Outside Mirror Arm Mounting Screw for 1947-1970 Chevrolet & GMC trucks. Uses either two or three screws per arm. Screws are 5/16"-18 x 1-1/4" long, countersunk Phillips head.
This is a fuel pump "Helmet" head fillister screw for 1937-1951 Chevrolet & GMC cars & trucks. Screw is a 10-32 x 1/2" machine screw. Replaces GM# 120216
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This screw is to retain the outside door handles on all Chevrolet passenger cars & Chevy & GMC trucks. One required per handle. Hex head with raised shoulder. Dimensions: 1/4-28 Thread, OL 9/16", Shoulder 1/4", OD of Shoulder 5/16". Replaces GM# 3654594. Specific Applications: 1928-1931 Passenger cars - Closed Models with Fisher Body; 1932-1935 Roadster & Phaeton - Open Models; 1932-1946 Chevrolet & GMC Trucks Also see FS-10595 for wave washer.
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
One Person System Takes The Work Out of Brake Bleeding. Bleeding your brake or clutch line has never been easier or simpler! Revolutionary double-patented Speed Bleeder replaces the original bleeder valve in your caliper/wheel cylinder with a spring-loaded one-way ball and check valve design. This unique design opens to allow the old fluid and air out, then closes automatically between pumps to prevent the old fluid and air from re-entering the line. It's a real time saver! For 3/8-24 threads.
This is a replacement Horn Adjusting Screw and Lock Nut set for 1931-1957 GM Klaxon Vibrating Horns. The adjusting screw is 10-32 x 5/8" and comes with special 10-32 lock nut.
This interior trim screw set fits 1955-1957 Chevrolet 4 door hardtops. These screws are for mounting the interior garnish mouldings, located above the door panels along the side windows and windshield.
This is an Interior Stainless Screw Set for 1947-1953 Chevrolet & GMC Trucks. Kit includes fasteners for windshield garnish molding, windshield division bar and door window garnish moldings.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This interior trim screw set fits 1956-1957 Chevrolet 4 door wagons. These screws are for mounting the interior garnish mouldings, located above the door panels along the side windows and windshield.