260 Items Found
Showing 1 thru 100
Showing 1 thru 100
LED Tail Light Assemblies
This is a SEQUENTIAL 12-Volt LED PLASTIC tail light lens - with CLEAR LICENSE LENS for 1937-1953 Chevrolet & GMC cars & trucks. Replaces GM# 920626,, 920696, 5937162 Features: 27 Super Bright Red LEDs and 6 Super White LEDs for License light. Features Sequential Operation with Selector Switch to Select Sequential Left, Sequential Right, or Sequential Function OFF as well as Sequential Once Brake Attention Function. Function. Recommended upgrade under dash flasher to FS-250A LED flasher. Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach; 1939-1940 Station Wagon; 1939-1952 Coupe Pickup, Sedan Delivery; 1940-1946 All Trucks; 1947-1948 Trucks - Models EP,ER,QL,QX,FP,FR,RL,RX (exc. Panel); 1949-1953 All Commercial
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This complete LEFT SIDE LED Tail Light Assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Replaces GM# 927565. Comes with stainless rim and black housing . Specify right or left when ordering. LED units are 12 volt and have 39 Super Bright Red LED's. Each lens is epoxy coated and has fully sealed electronics. Solid state circuit boards are designed for 7.7-14.0 volts DC
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This complete RIGHT SIDE LED Tail Light Assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Replaces GM# 927566. Comes with stainless rim and black housing . Specify right or left when ordering. LED units are 12 volt and have 39 Super Bright Red LED's. Each lens is epoxy coated and has fully sealed electronics. Solid state circuit boards are designed for 7.7-14.0 volts DC
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a Ford Teardrop Tail Light Assembly with LED card installed behind the red glass lens. The housing is powder coated Black for rust protection. Light is 12-volt and comes with 28 Super Bright LED's.
For All Chevrolet Cars and Trucks
This is a 1938-1939 Ford Teardrop RED LED Tail Light that can be used for Hot Rod Stop & Turn Signal Light applications. It comes with a #1157 plug adapter. The lens has 39 Super Bright RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed at 7.7 - 14.0 VDC. It has a die cast chrome plated bezel and mounts to a flat surface with 2 small studs.
For All Chevrolet Cars and Trucks
12 Volt. Stainless Steel Bezel. EPOXY COATED, FULLY SEALED ELECTRONICS.
For All Chevrolet Cars and Trucks
12 VOLT. 22 RED LEDS. MOUNTS WITH 2 STUDS. INCLUDES FLAT MOUNTING PAD & WEDGE MOUNTING PAD. EPOXY COATED, FULLY SEALED ELECTRONICS.
For 1937 1938 1939 1940 1941 1942 Chevrolet Cars and Trucks
This complete LED FLUSH MOUNT tail light assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Comes with 12 volt LED Lens with BLUE DOT. Fits Left or Right side. Replaces GM# 927117, 927565 These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 36 super bright red LED's with Blue Dot. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Stainless Steel Rim and mounting pad. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). FLUSH MOUNT FITS RIGHT OR LEFT.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a 1950's Pontiac RED LED Tail Light that can be used for Hot Rod Stop & Turn Signal Light applications. The lens has 41 Super Bright RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed for 12-VDC systems. It has a chrome plated bezel and mounts to a flat surface. Dimensions: Lens OD 3-5/16", Bezel OD 4-5/16". Flush Mount.
For All Pontiac Cars and Trucks
This 12-VOLT LED Tail Light Assembly fits all 1940 Chevrolet passenger cars (exc Sedan Delivery or Coupe Pickup). It mounts into the original position on the body and comes with 22 Super Bright Red LEDs. The lens is completely sealed Polycarbonate and is epoxy coated for fully sealed electronics with #1157 plug. Ready to install with a 304 stainless rim, black housing, socket and mounting hardware. Fits left or right by reversing the lens. GM# 927067, 927068, 927069, 927070
For 1940 Chevrolet Cars
12 VOLT. 45 SUPER BRIGHT RED LEDS.
For 1937 1938 Chevrolet Cars
This 12 Volt sequential LED tail light assembly fits all 1937-1938 Chevrolet passenger cars - RIGHT - BLACK housing with CHROME RIM. Replaces GM# 927511, 916832 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) Includes 27 super bright red LEDs and 6 super white LEDs for license plate light. Features sequential operation with selector switch to select sequential left, sequential right, or sequential function off as well as sequential once brake attention function. Recommended upgrade under dash flasher to FS-250A LED flasher.
For 1937 1938 Chevrolet Cars
1959 Cadillac Tail Light Assembly with Chrome Ring and Base. * 40 Super Bright LED's * Epoxy Coated, Fully Sealed Electronics with 1157 Plug * 3 Wires (1 Wire with Ring Terminal)
For 1959 Chevrolet Cars
ITEM IS DISCONTINUED BY OUR SUPPLIER. AVAILABILITY IS LIMITED TO STOCK ON HAND. This is a complete tail light assembly for 1937-1948 Chevrolet passenger cars - LEFT - BLACK with CHROME RIM, LED LENS WITH BLUE DOT. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 23 super bright red LED's with Blue Dot. Left side assemblies also have 6 super white LED's for license light. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). SPECIFY RIGHT OR LEFT and BLACK OR STAINLESS HOUSING when ordering.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a complete 12 Volt LED tail light assembly with CHROME bezel for 1951-1952 Chevrolet passenger cars (exc Sedan Delivery). The assembly includes a polycarbonate lens with sealed electronics and the stock round reflector mounted on the chrome bezel. Fits Right or Left side. Replaces GM# 927883, 927884 Features: * 16 Super Bright Red LED, Complete with Polycarbonate Lens * Epoxy Coated, Fully Sealed Electronics * Chrome Rim * Includes Housing, Mounting Hardware, Round Reflector, Socket and Wires
For 1951 1952 Chevrolet Cars
This 12 Volt sequential LED tail light assembly fits all 1937-1938 Chevrolet passenger vehicles. STAINLESS STEEL housing. RIGHT side. Replaces GM# 927511, 916832 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) Includes 27 super bright red LEDs and 6 super white LEDs for license plate light. Features sequential operation with selector switch to select sequential left, sequential right, or sequential function off as well as sequential once brake attention function. Recommended upgrade under dash flasher to FS-250A LED flasher.
For 1937 1938 Chevrolet Cars
This 12 Volt sequential LED tail light assembly fits all 1937-1938 Chevrolet passenger cars - LEFT - BLACK housing with CHROME RIM. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) Includes 27 super bright red LEDs and 6 super white LEDs for license plate light. Features sequential operation with selector switch to select sequential left, sequential right, or sequential function off as well as sequential once brake attention function. Recommended upgrade under dash flasher to FS-250A LED flasher.
For 1937 1938 Chevrolet Cars
12 VOLT. 45 SUPER BRIGHT RED LEDS FOR THE TAILLIGHT AND 6 SUPER WHITE LEDS FOR THE LICENSE PLATE LIGHT.
For 1937 1938 Chevrolet Cars
LIMITED SUPPLY!! THIS ITEM HAS BEEN DISCONTINUED BY OUR SUPPLIER - PRICE IS DISCOUNTED UNTIL CURRENT STOCK IS SOLD This 12-volt LED tail light assembly fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#'s 916877 & 916878. This light comes in chrome with 17 Super Bright LEDs in a polycarbonate lens & chrome rim. LEFT SIDE ONLY. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a complete 12 Volt LED tail light assembly with STAINLESS Bezel for 1949-1950 Chevrolet passenger cars. The flat plastic lens is correct for 1949 but works as a replacement for 1950. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756 Features: * 16 Super Bright Red LED, Complete with Polycarbonate Lens * Epoxy Coated, Fully Sealed Electronics * Stamped Stainless Steel Rim * Includes Housing, Mounting Hardware, Round Reflector, Socket and Wires
For 1949 1950 Chevrolet Cars
This is a complete tail light assembly for 1937-1948 Chevrolet passenger cars - RIGHT - STAINLESS with STAINLESS RIM, LED LENS WITH BLUE DOT. Replaces GM# 927511, 916832 Specific Applications: 1937-1938 All Passenger These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 23 super bright red LED's with Blue Dot. Left side assemblies also have 6 super white LED's for license light. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). SPECIFY RIGHT OR LEFT and BLACK OR STAINLESS HOUSING when ordering.
For 1937 1938 Chevrolet Cars
This is a complete 12 Volt LED tail light assembly with STAINLESS Bezel for 1949-1950 Chevrolet passenger cars. The flat plastic lens is correct for 1949 but works as a replacement for 1950. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756 Features: * 16 Super Bright Red LED, Complete with Polycarbonate Lens * Epoxy Coated, Fully Sealed Electronics * Stamped Stainless Steel Rim * Includes Housing, Mounting Hardware, Round Reflector, Socket and Wires
For 1949 1950 Chevrolet Cars
This 12 Volt sequential LED tail light assembly fits all 1937-1938 Chevrolet passenger cars - LEFT - STAINLESS housing with STAINLESS RIM. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) Includes 27 super bright red LEDs and 6 super white LEDs for license plate light. Features sequential operation with selector switch to select sequential left, sequential right, or sequential function off as well as sequential once brake attention function. Recommended upgrade under dash flasher to FS-250A LED flasher.
For 1937 1938 Chevrolet Cars
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#' 916877, 916878. This light comes in CHROME with a AMBER LED with AMBER lens & chrome rim. Also available in all chrome versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
For Chevrolet Cars and Trucks
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#' 916877, 916878. This light comes in PRIMER with a AMBER LED with CLEAR lens & chrome rim. Also available in all chrome versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#' 916877, 916878. This light comes in CHROME with a AMBER LED with CLEAR lens & chrome rim. Also available in primered housing. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a complete tail light assembly for 1937-1948 Chevrolet passenger cars - LEFT - STAINLESS with STAINLESS RIM, LED LENS WITH BLUE DOT. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 23 super bright red LED's with Blue Dot. Left side assemblies also have 6 super white LED's for license light. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). SPECIFY RIGHT OR LEFT and BLACK OR STAINLESS HOUSING when ordering.
For 1937 1938 Chevrolet Cars
These flush mounted LED Tail Light Assemblies fit 1941-1948 Chevrolet passenger cars or as a custom car feature on any vehicle. . Product Details: Complete taillamp assembly with very bright and visible LEDs for the stop, tail, and turn signal function. LEDs feature a wide viewing angle of 100 degrees as well as cool operation and long life. This lamp is designed to bolt into a 1941-48 Chevy in place of the original taillight. Surface mount design with no bucket. Great solution for cars with clearance problems (rumble seat or tire) or new installations. Requires drilling only three small holes in new installations. May be used with three or four wire connection (ground, taillight, stoplight, turnsignal). Includes RapidFire™ brake lights and modulated taillights for maximum vehicle visibility. 12 volt required. Construction: Includes stainless steel base plate, stainless steel studs, nuts, and washers, custom designed acrylic lens to maximize the LEDs visibility, lens has built-in reflector for lights off safety, stainless steel bezel, custom molded taillamp to body seal. Completely assembled in our Indiana factory. Installation Time: About 30 minutes. LEDs: 14 high intensity LEDs per lamp with 100 degree viewing angle and rugged four pin design. Kit Contents:(2) LED complete taillamp assemblies, (4) solderless connectors, (2) LED to car electrical harness, (2) custom molded taillamp to body seal, installation instructions.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
INCLUDES 2 FLUSH MOUNT ASSEMBLIES WITH LED ARRAYS, ELECTRICAL HARNESSES, CONNECTORS, NECESSARY BRACKETS, AND ATTACHING HARDWARE. ALSO INCLUDES CUSTOM MOLDED TAILLIGHT TO BODY GASKET.
For 1940 Chevrolet Cars
This beautiful tail light assembly fits all 1954 Chevrolet passenger cars (will fit 1953 cars as a custom feature). Assembly is complete with Chrome Bezel, All Lenses, Gaksets, and Backing Plate Includes 40 LED Red Tail Lamp Lens & 28 LED Backup Lens 12 Volt - Includes Tail Light Socket & Backup Light Socket Mounting Hardware and Body Seal Included, Fits R/H & L/H Side Epoxy Coated, Fully Sealed Electronics. Replaces GM# 897627
For 1954 Chevrolet Cars
LED Tail Light Conversions
This is a 6-VOLT LED tail light conversion for 1931-1932 Chevrolet passenger cars & 1931-1939 Chevy & GMC trucks. These amazing conversions will make your old Chevy really visible from the rear! 6-Volt version has 60 Super Bright RED LEDs, plus two White LEDs for the license light. Bolts into original or our reproduction tail light housings. Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason - it's easy to see! These newly designed LED conversions have 60 super bright LED lights installed on a custom fit card specifically made for these cars & trucks. No special bracketing required. Can be installed as fast as changing a tail light lens & hooking up the wires! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 6-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. These will work with turn signal, tail light and stop light circuits. NOTE: Will not work with Blue Dot Lenses. Another quality part for your vintage Chevrolet from The Filling Station! Wiring Key: Black = Ground Blue = Stop Light Yellow = Tail Light
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
This is a 12-VOLT LED tail light conversion for 1931-1932 Chevrolet passenger cars & 1931-1939 Chevy & GMC trucks. These amazing conversions will make your old Chevy really visible from the rear! Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason - it's easy to see! These newly designed LED conversions have 56 super bright LED lights installed on a custom fit card specifically made for these cars & trucks. No special bracketing required. Can be installed as fast as changing a tail light lens! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 6-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. They will work with turn signal, tail light and stop light circuits. NOTE: Will not work with Blue Dot Lenses. Another quality part for your vintage Chevrolet from The Filling Station! Wiring Key: Black = Ground Blue = Stop Light Yellow = Tail Light
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
This 6-volt LED Conversion fits all 1931-1936 Chevrolet passenger cars This card comes with 56 Red LEDs for and 2 White LED's for license light. Red LED's are 5mm High Intensity bulbs for Stop, Tail & Turn signal. White LED's are 3mm High Intensity bulbs for the License Light. Cards are pre-wired for Stop Light, Tail Light and Turn Signal vehicles. Also included is hardware and instructions for mounting the card into your original tail light housing. This high quality item is designed, assembled and tested in the USA! If using LED's on front and rear, be sure to order a load resistor as LED lights will not draw enough current to operate standard flashers.
For 1937 1938 Chevrolet Cars
This LED conversion kit for original tail lights fits 1926-1930 Chevrolet Passenger cars & Trucks. These amazing conversions will make your old Chevy really visible from the rear! All new mounting bracket & instructions make installation easy and quick. Kits come with everything needed to change an original tail light to super bright LED! Each card features 52 Red LED's for stop, turn and tail light also 2 White LED's for the license light. Specify 6-Volt or 12-Volt when ordering. Proudly Made in the USA! Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason. It's easy to see! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 4-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. Kits come with one LED card, fasteners, hardware and instructions needed to install the card into the tail light bucket. They will work with turn signal, tail light and stop light circuits.
For 1926 1927 1928 1929 1930 Chevrolet Cars and Trucks
This LED conversion kit for original tail lights fits 1926-1930 Chevrolet Passenger cars & Trucks. These amazing conversions will make your old Chevy really visible from the rear! All new mounting bracket & instructions make installation easy and quick. Kits come with everything needed to change an original tail light to super bright LED! Each card features 52 Red LED's for stop, turn and tail light also 2 White LED's for the license light. Specify 6-Volt or 12-Volt when ordering. Proudly Made in the USA! Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason. It's easy to see! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 4-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. Kits come with one LED card, fasteners, hardware and instructions needed to install the card into the tail light bucket. They will work with turn signal, tail light and stop light circuits.
For 1926 1927 1928 1929 1930 Chevrolet Cars and Trucks
This 6-volt LED Conversion fits all 1937-1938 Chevrolet passenger cars This card comes with 36 Red LEDs for and 2 White LED's for license light. Red LED's are 5mm High Intensity bulbs for Stop, Tail & Turn signal. White LED's are 3mm High Intensity bulbs for the License Light. Cards are pre-wired for Stop Light, Tail Light and Turn Signal vehicles. Also included is hardware and simple to follow instructions for mounting the card into your original tail light housing. This high quality item is designed, assembled and tested in the USA! If using LED's on front and rear, be sure to order a load resistor as LED lights will not draw enough current to operate standard flashers.
For 1937 1938 Chevrolet Cars
FITS 1939 CARS; 1940-48 SEDAN DELIVERY; 1949-52 STATION WAGON & 1947-53 PANEL TRUCKS & SUBURBAN. WILL NOT WORK WITH BLUEDOT LENSES.
For Chevrolet Cars and Trucks
FITS 1941-48 CARS ONLY. WILL NOT WORK WITH BLUEDOT LENSES.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Note: This unit requires fabricating a mounting bracket. Instructions to make this bracket are included.
For 1954 Chevrolet Cars
LED Tail Light Lenses
This is a 12 Volt LED reflector for the tail light on 1949-1950 Chevrolet passenger cars (exc Sedan Delivery or Station Wagon). This assembly has a 5-LED red reflex lens with spring strap underneath. 2 wire hook up. Two required per vehicle. Replaces GM# 5938323
For 1949 1950 Chevrolet Cars
This is a 12 Volt red 5-LED reflector for the tail light on 1951-1952 & 1956 Chevrolet passenger cars (exc Sedan Delivery or Station Wagon). Two required per vehicle. Reflector comes with a threaded stud on the back for mounting and a two wire hook up. Dimensions: OD =1-7/16" (1.445î/36.7 mm). Replaces GM# 5943455
For 1951 1952 1953 1954 1955 1956 Chevrolet Cars
This is a 6 volt LED replacement bulb for 1925-1930 Chevrolet Passenger & Truck stop lights.
For 1925 1926 1927 1928 1929 1930 Chevrolet Cars and Trucks
This is a plastic red LED tail light lens for all 1953 Chevrolet passenger cars - UPPER lens. 2 required per car. The 12-volt LED lens has 26 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics with #1157 Plug. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Replaces GM# 5943403
For 1953 Chevrolet Cars
This is a Ford Teardrop Tail Light Assembly with red glass lens. The housing is powder coated Black for rust protection. Light comes with a 12-volt #1157 bulb installed.
For All Chevrolet Cars and Trucks
12 VOLT. 39 SUPER BRIGHT RED LEDS. EPOXY COATED, FULLY SEALED ELECTRONICS WITH 1157 PLUG. SOLID STATE CIRCUIT BOARDS ARE DESIGNED FOR 7.7-14.O VDC.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a 12-Volt LED PLASTIC tail light lens for 1937-1953 Chevrolet & GMC cars & trucks. Replaces GM# 920626,, 920696, 5937162 Features: 27 Super Bright Red LEDs for Tail Complete with Polycarbonate Lens Epoxy Coated, Fully Sealed Electronics Solid State Circuit Boards are Designed for 7.7-14.0 VDC Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach; 1939-1940 Station Wagon; 1939-1952 Coupe Pickup, Sedan Delivery; 1940-1946 All Trucks; 1947-1948 Trucks - Models EP,ER,QL,QX,FP,FR,RL,RX (exc. Panel); 1949-1953 All Commercial
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a plastic LED CENTER tail light lens all 1953 Chevrolet passenger cars. 2 required per car. The 12-volt LED lens has 40 Super Bright Red LEDs. Stop - Tail - Turn Signal functions. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Replaces GM# 5943406
For 1953 Chevrolet Cars
* 13 Super Bright LED's * Epoxy Coated, Fully Sealed Electronics with 1157 Plug * Solid State Circuit Board 7.7 - 14.0 volts DC.
For 1958 Chevrolet Cars
This is a plastic 12-Volt LED tail light lens for all 1949-1950 Chevrolet passenger cars. This lens is the 1949 design flat lens, but will fit all 1950 models as well. 2 required per car. Lens has 16 Super Bright Red LEDs, complete with Polycarbonate Lens. It is epoxy coated, fully sealed electronics with #1157 plug and play connection. Replaces GM# 5937861, 5939421 Features: * 16 Super Bright Red LED with high quality injection molded polycarbonate lens * Epoxy coated, fully sealed electronics * Easy wiring with hard wired 1157 double contact plug * Energy efficient solid-state circuit board engineered for 12V DC systems
For 1949 1950 Chevrolet Cars
This is an LED tail light lens for all 1951-1952 Chevrolet passenger cars. It is a 12 volt unit with super bright LEDs. The lens electronics are fully sealed with epoxy coating. Each unit comes with #1157 plug to make installation easy. Solid state circuit boads are designed for 7.7-14.0 volts, DC. Replaces GM# 5940038
For 1951 1952 Chevrolet Cars
This plastic outer red LED tail light lens fits all 1956 Chevrolet passenger cars. The 12-volt LED lens has 40 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Two required per car. Replaces GM# 5947161
For 1956 Chevrolet Cars
This is a plastic LED CENTER tail light lens 1962 Chevrolet Impala passenger cars. The 12-volt LED lens has 40 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Comes with #1157 plug for quick and easy installation. Replaces GM# 5953731
For 1962 Chevrolet Cars
This is a RED plastic LED Tail Light Lens for 1963 Chevrolet Impala passenger cars. The 12-volt LED lens has 40 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Comes with #1157 plug for quick and easy installation. Replaces GM# 5954186, 5954191
For 1963 Chevrolet Cars
This is a plastic LED tail light lens for all 1954 Chevrolet passenger cars. 2 required per car. Lens has 40 Super Bright Red LEDs, complete with Polycarbonate Lens. It is epoxy coated, fully sealed electronics with #1157 plug and play connection. Replaces GM# 5941679
For 1954 Chevrolet Cars
This plastic red LED tail light lens fits all 1960-1961 Chevrolet passenger cars. The 12-volt LED lens has 40 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics with #1157 plug. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Two required per car. Replaces GM# 5951078
For 1960 1961 Chevrolet Cars
This is a 12-Volt Polycarbonate LED Tail Light Lens for 1939-1953 Chevrolet & GMC cars & trucks. Replaces GM# 920696. Features: * Super bright red LED with high quality injection molded polycarbonate lens * Epoxy coated, fully sealed electronics * Easy wiring with hard wired 1157 double contact plug * Energy efficient solid-state circuit board engineered for 12V DC systems Specific Applications: 1939 All Passenger Cars; 1940-1948 Sedan Delivery (with dual tail lights); 1947-1953 Panel Trucks & Suburban (with dual high mounted tail lights); 1949-1952 Station Wagon (with dual tail lights)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This 12 Volt LED tail light lens fits all 1940 Chevrolet passenger cars except, Sedan Delivery, and Coupe Pickup. It mounts into the original tail light housing and comes with 22 Super Bright Red LEDs. The lens is completely sealed Polycarbonate and is epoxy coated for fully sealed electronics. Wired with an 1157 plug for "plug & play" installation. Fits left or right. Replaces GM# 5930213, 5930214
For 1940 Chevrolet Cars
This is a SEQUENTIAL 12-Volt LED PLASTIC tail light lens for 1937-1953 Chevrolet & GMC cars & trucks. Replaces GM# 920626,, 920696, 5937162 Features: 27 Super Bright Red LEDs Features Sequential Operation with Selector Switch to Select Sequential Left, Sequential Right, or Sequential Function OFF as well as Sequential Once Brake Attention Function. Function. Recommended upgrade under dash flasher to FS-250A LED flasher. Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach; 1939-1940 Station Wagon; 1939-1952 Coupe Pickup, Sedan Delivery; 1940-1946 All Trucks; 1947-1948 Trucks - Models EP,ER,QL,QX,FP,FR,RL,RX (exc. Panel); 1949-1953 All Commercial
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This plastic outer red LED tail light lens fits all 1957 Chevrolet passenger cars. It has 51 Super Bright LEDs. It is Epoxy Coated, Fully Sealed Electronics with #1157 Plug. Solid State Circuit Board 7.7 to 14.0 Volts DC. Two required per car. Dimensions: 1-7/8" x 4-3/8". Replaces GM# 5948104
For 1957 Chevrolet Cars
12 VOLT. 16 RED LEDS WITH A RED LENS FOR THE TAILLIGHT. EPOXY COATED, FULLY SEALED ELECTRONICS.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This plastic outer red LED tail light lens fits all 1955 Chevrolet passenger cars. The 12-volt LED lens has 60 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics with #1157 Plug. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Two required per car. Replaces GM# 5945878
For 1955 Chevrolet Cars
This is a RED plastic LED Tail Light Lens for 1964 Chevrolet Full Size passenger cars (exc Station Wagon). The 12-volt LED lens has 41 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Comes with #1157 plug for quick and easy installation. Replaces GM# 5955333, 5955340
For 1964 Chevrolet Cars
12 VOLT. 16 RED LEDS WITH A CLEAR LENS FOR THE TAILLIGHT. EPOXY COATED, FULLY SEALED ELECTRONICS.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a Ford Teardrop Tail Light Assembly with Blue Dot installed in the red glass lens. The housing is powder coated Black for rust protection. Light comes with a 12-volt #1157 bulb installed.
For All Chevrolet Cars and Trucks
This LED tail light lens with Blue Dot fits all 1937 & 1938 Chevrolet passenger cars, also 1940-1953 Chevrolet & GMC trucks. Left side lens comes with license lens with 6 white LED's. Right side has no license lens. The red lens is a new 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each lens has 22 super bright red LED's with Blue Dot installed. SPECIFY RIGHT OR LEFT WHEN ORDERING. Features: * Polycarbonate, epoxy coated, sealed LED lens with Blue Dot installed. * Blue Dot with chrome rim looks exactly like originals from the '50's * Solid State Circuit Boards are designed for 7.7-14.0 volts DC Replaces GM# 920626, 920696, 5937162
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
LED Tail Light Plastic Lens with "CHEVROLET" script for all 1933-1936 Chevrolet passenger cars. Dimensions: 4-3/8" Tall x 2-7/8" Wide. Replaces GM# 915402 Specific Applications: 1933-1936 Passenger - Fits Left or Right 30 Super Bright Red LEDs with Red Lens Easily Installs in Your Original Housing with 1156 Plugs Epoxy Coated, Fully Sealed Electronics Solid State Circuit Boards are Designed for 7.7-14.0 VDC Licensed by General Motors
For 1933 1934 1935 1936 Chevrolet Cars
This is a new 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each lens has 36 super bright red LED's with Blue Dot installed: * Polycarbonate, epoxy coated, sealed LED lens with Blue Dot installed. * Blue Dot with chrome rim looks exactly like originals from the '50's * Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). * Will fit Left or Right
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars and Trucks
This is a 12-Volt LED PLASTIC tail light lens - with CLEAR LICENSE LENS for 1937-1953 Chevrolet & GMC cars & trucks. Replaces GM# 920626,, 920696, 5937162 Features: 27 Super Bright Red LEDs for Tail 6 Super White LEDs for License Complete with Polycarbonate Lens Epoxy Coated, Fully Sealed Electronics Solid State Circuit Boards are Designed for 7.7-14.0 VDC Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach; 1939-1940 Station Wagon; 1939-1952 Coupe Pickup, Sedan Delivery; 1940-1946 All Trucks; 1947-1948 Trucks - Models EP,ER,QL,QX,FP,FR,RL,RX (exc. Panel); 1949-1953 All Commercial
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This LED tail light lens with Blue Dot fits all 1937 & 1938 Chevrolet passenger cars, also 1940-1953 Chevrolet & GMC trucks. Left side lens comes with license lens with 6 white LED's. Right side has no license lens. The red lens is a new 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each lens has 22 super bright red LED's with Blue Dot installed. SPECIFY RIGHT OR LEFT WHEN ORDERING. Features: * Polycarbonate, epoxy coated, sealed LED lens with Blue Dot installed. * Blue Dot with chrome rim looks exactly like originals from the '50's * Solid State Circuit Boards are designed for 7.7-14.0 volts DC Replaces GM# 920626, 920696, 5937162
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a 12 Volt LED Lens for 1938-1939 Ford tail lights. Features: *New lens design is same size and shape as original Ford lens. *Super bright LED with high quality injection molded polycarbonate lens. *Dual function with tail light and bright stop/turn signal. *Lens fits all original & reproduction 1938-39 Ford tail lights. *Easy electrical connection with 1157 plug, no modification to vehicle. *Fits L/H or R/H side.
For All Chevrolet Cars and Trucks
This complete LEFT SIDE tail light assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Stainless rim with black housing. Comes with 12 volt LED Lens with BLUE DOT. Specify right or left when ordering. Replaces GM# 927117, 927565 These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 36 super bright red LED's with Blue Dot. Complete assemblies include: * Polycarbonate, epoxy coated, sealed LED lens with Blue Dot installed. * Black housing with stainless steel rim and mounting pad. * Blue Dot with chrome rim looks exactly like originals from the '50's * Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included).
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This complete RIGHT SIDE tail light assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Stainless rim with black housing. Comes with 12 volt LED Lens with BLUE DOT. Specify right or left when ordering. Replaces GM# 927117, 927565 These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 36 super bright red LED's with Blue Dot. Complete assemblies include: * Polycarbonate, epoxy coated, sealed LED lens with Blue Dot installed. * Black housing with stainless steel rim and mounting pad. * Blue Dot with chrome rim looks exactly like originals from the '50's * Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included).
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
THIS IS AN LED CONVERSION FOR 1959 CHEVROLET PASSENGER CARS, DOES NOT FIT STATION WAGON OR EL CAMINO * Each Light has 98 Red LEDs * Super bright red LED circuit board only to retrofit. * Precision cut to fit inside the original tail light lens. * Easy electrical connection with 1157 plug, no modification to vehicle. * Energy efficient solid-state circuit board engineered for 12V DC systems.
For 1959 Chevrolet Cars
Tail Light Arm
CURVED FACE THAT MEETS BODY - 3-5/8 LONG
For 1937 1938 Chevrolet Cars
This is the left side tail light arm (fender mount) for 1933-1935 Chevrolet passenger cars. This arm can be used on the right side by cutting off the license plate tab that sticks up. NOTE: If this arm is used on the right side, the angle of the arm may need to be modified. Replaces GM# 370901. Specific Applications: 1933-1934 Passenger cars with fender mounted tail lights 1935 Standard Passenger cars with fender mounted tail lights.
For 1933 1934 1935 Chevrolet Cars
CURVED FACE THAT MEETS BODY - 3-5/8 LONG
For 1937 1938 Chevrolet Cars
FLAT FACE WHERE IT MEETS BODY - 3-1/4" LONG
For 1937 1938 Chevrolet Cars
FLAT FACE WHERE IT MEETS BODY - 3-1/4" LONG
For 1937 1938 Chevrolet Cars
This is the tail light and license plate bracket for all 1931 & 1932 Chevrolet passenger cars (Series AE & BA) on the LEFT side. This bracket mounts on the left fender. Replaces GM# 366833
For 1931 1932 Chevrolet Cars
This is the tail light bracket for all 1931 & 1932 Chevrolet passenger cars (Series AE & BA) on the RIGHT side. This bracket mounts on the right fender and does not have a license plate bracket. Replaces GM# 366834
For 1931 1932 Chevrolet Cars
Tail Light Assemblies
This complete LEFT SIDE tail light assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Stainless rim with black housing. This assembly comes ready for turn signals and with 12 volt bulbs. Specify right or left when ordering. Replaces GM# 927117, 927565.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This complete tail light assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Stainless rim with black housing. This assembly comes ready for turn signals and with 12 volt bulbs. Specify right or left when ordering. Replaces GM# 927117, 927565.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1959 Cadillac Tail Light Lens with Chrome Ring, Base and Pigtail included.
For 1959 Chevrolet Cars
1959 Cadillac Tail Light Lens with Chrome Ring, Base and Pigtail included.
For 1959 Chevrolet Cars
This is a complete tail light assembly for 1937-1948 Chevrolet passenger cars - LEFT - BLACK with CHROME RIM. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp)
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a complete tail light assembly for 1937-1938 Chevrolet passenger cars - RIGHT - BLACK with CHROME RIM. Replaces GM# 927511, 916832 Specific Applications: 1937-1938 All Passenger
For 1937 1938 Chevrolet Cars
This is an oval shaped RED Light that can be used for Stop, Turn Signal or Clearance Light applications. It comes with a 3-prong female plug adapter. The lens has 40 RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed at 7.7 - 14.0 VDC. Dimensions: 3-11/16" x 7-7/8"
For All Chevrolet Cars and Trucks
This is a complete tail light assembly for 1940 Chevrolet passenger cars. It can be used on right or left side by reversing the lens. Unit comes with 304 stainless tail lamp rim, black housing with socket, glass lens and gasket, 12-volt bulb and mounting hardware. Replaces GM# 927067, 927068, 927069, 927070
For 1940 Chevrolet Cars
This complete LEFT SIDE tail light assembly with Blue Dot lens fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Chrome rim with black housing. Replaces GM# 927565. Specify right or left when ordering. 12 volt with dual contact bulb.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This complete RIGHT SIDE tail light assembly with Blue Dot lens fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Chrome rim with black housing. Replaces GM# 927566. Specify right or left when ordering. 12 volt with dual contact bulb.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a complete tail light assembly with BLUE DOT GLASS LENS for 1937-1948 Chevrolet passenger cars - LEFT - BLACK with CHROME RIM. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp)
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a complete tail light assembly for 1937-1938 Chevrolet passenger cars - RIGHT - BLACK with CHROME RIM - GLASS BLUE DOT LENS . Replaces GM# 927511, 916832 Specific Applications: 1937-1938 All Passenger
For 1937 1938 Chevrolet Cars
This is a complete tail light assembly with CHROME bezel for 1951-1952 Chevrolet passenger cars (exc Sedan Delivery). The assembly includes a glass lens and the stock round reflector mounted on the chrome bezel. It comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. Fits Right or Left side. Replaces GM# 927883, 927884
For 1951 1952 Chevrolet Cars
This is a complete tail light assembly with STAINLESS bezel for 1949-1950 Chevrolet passenger cars. The lens is correct for 1950 but works as a replacement for 1949. Comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. See BA-119 for original style 1949 flat tail light lens. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756
For 1949 1950 Chevrolet Cars
This is a complete tail light assembly with STAINLESS bezel for 1949-1950 Chevrolet passenger cars. The lens is correct for 1950 but works as a replacement for 1949. Comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. See BA-119 for original style 1949 flat tail light lens. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756
For 1949 1950 Chevrolet Cars
THIS ITEM DISCONTINUED BY OUR SUPPLIER - CLOSEOUT PRICING, SUBJECT TO STOCK ON HAND. This is a complete tail light assembly with CHROME bezel and BLUE DOT LENS for 1949-1950 Chevrolet passenger cars. The glass lens is correct for 1950 but works as a replacement for 1949. Comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756
For 1949 1950 Chevrolet Cars
This is a complete tail light assembly with BLUE DOT LENS and high grade stainless steel bezel for 1949-1950 Chevrolet passenger cars. The housing is gloss black powder coated. The red glass lens is correct for 1950 but works as a replacement for 1949. Comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756
For 1949 1950 Chevrolet Cars
This is a complete tail light assembly with BLUE DOT LENS and high grade stainless steel bezel for 1949-1950 Chevrolet passenger cars. The housing is gloss black powder coated. The red glass lens is correct for 1950 but works as a replacement for 1949. Comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756
For 1949 1950 Chevrolet Cars
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#'s 916877 & 916878. This light comes in primer with a RED glass lens & chrome rim. Also available in LED & chrome versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
For Chevrolet Cars and Trucks
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#'s 916877 & 916878. This light comes in CHROME with a red glass lens & chrome rim. Also available in LED & primer versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
For Chevrolet Cars and Trucks
260 Items Found
Showing 1 thru 100
Showing 1 thru 100