This original style windshield wiper arm fits all 1925-1932 Chevrolet & GMC cars & trucks with vacuum wiper motors. It has a slotted tip to work with AF-340 wiper blades. Replaces GM# 343135 Specific Applications: 1925-1931 Chevy Passenger; 1925-1932 Chevrolet & GMC Trucks
For 1925 1926 1927 1928 1929 1930 1931 1932 Chevrolet Cars and Trucks
This polished stainless steel windshield wiper arm fits Chevrolet & GMC cars & trucks. The arm fits the left or right side. Replaces GM# 4917171, 3951915, 3951916, 3824127, 3824128, 3824129, 3824130 Specific Applications: 1961-64 Passenger cars 1967-72 Chevy or GMC Trucks
For 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks
This universal wiper arm is polished stainless steel with an adjustable range of 6" to 8" long. They have a "J" Hook end to accept wiper blades made especially for this type of hook. It clamps onto a 1/4" shaft and works with the following wiper motors: VT-6VSS, VT-12VSS, VT-6VK AND VT-12VK. This arm is designed for use with VT-66 or VT-67 wiper blades with "J" Hook opening.
This universal wiper arm is polished stainless steel with an adjustable range of 8" to 12" long. They have a "J" Hook end to accept wiper blades made especially for this type of hook. It clamps onto a 1/4" shaft and works with the following wiper motors: VT-6VSS, VT-12VSS, VT-6VK AND VT-12VK. This arm is designed for use with VT-66 or VT-67 wiper blades with "J" Hook opening.
This is a windshield wiper arm for 1949-1955 Chevrolet & GMC cars & trucks. Specify Left or Right when ordering Replaces GM# 3703494 Specific Applications: 1949-1954 Passenger (exc. Hardtop & Convertible); 1954-1955 (1st Series) Chevy & GMC Trucks
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a windshield wiper arm for 1949-1955 Chevrolet & GMC cars & trucks. Specify Left or Right when ordering Replaces GM# 3703494 Specific Applications: 1949-1954 Passenger (exc. Hardtop & Convertible); 1954-1955 (1st Series) Chevy & GMC Trucks
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This wiper arm fits all 1932-1934 Chevrolet passenger cars and 1931-1938 Chevrolet & GMC trucks. Overall Length of this arm is 7-3/4". Replaces GM# 603047
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This is a Windshield Wiper Arm for 1935-1936 Chevrolet Passenger cars. Arm is stainless steel and comes with tensioning cap. Overall length of arm is 6 inches. Replaces GM# 378506 Specific Applications: 1935 Master Passenger Cars: 1936 All Passenger Cars
This is a pair of Chrome Windshield Wiper Transmission Bezels for 1955-1956 Chevrolet Passenger Cars (exc 1955 150 Series). Set includes 2 bezels, 2 washer nozzles, and 2 lock nuts. See also L-136 for 1955 150 Series.
This is a pair of Chrome Windshield Wiper Transmission Bezels for 1955 Chevrolet 150 Series Passenger Cars. Set includes 2 bezels, 2 washer nozzles, and 2 lock nuts. See also L-136A for other than 150 Series.
This Wiper Tower Bezel Kit fits 1960 Chevrolet passenger vehicles. This 4 piece kit includes the 2 chrome wiper transmission bezels as well as 2 chrome bezel nuts.
This windshield wiper blade is the original flat style blade used from 1925-1937 on Chevrolet & GMC car & trucks. Blade is 8 inches long and has a flat clip on the top designed to fit into the slotted opening on the wiper arm. Replaces GM# 985459
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 Chevrolet Cars and Trucks
This windshield wiper blade is the original flat style blade used from 1937-1948 on Chevrolet & GMC car & trucks. Blade is 9 inches long and has a flat clip on the top designed to fit into the slotted opening on the wiper arm. Replaces GM# 985429, 985982 Specific Applications: 1937-1948 Passenger cars; 1939-1946 Trucks
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars and Trucks
This is a wiper blade insert refill for 1955-1959 Chevrolet & GMC cars & trucks. The blade refill is 12 inches long. Replaces GM# 566510 Specific Applications: 1955-1957 Passenger; 1955-1959 (2nd Series) Chevy & GMC Trucks
For 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This is a wiper blade insert refill for 1949-1955 Chevrolet & GMC cars & trucks. The blade refill is 11 inches long. Replaces GM# 373355, 557979 Specific Applications: 1949-1954 Passenger; 1954-1955 (1st Series) Chevy & GMC Trucks
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This complete windshield wiper blade fits 1949-1955 Chevrolet & GMC cars & trucks. The overall length of the blade is 11 inches long. Designed to fit with our TR-28 Wiper Arms. Replaces GM# 561094, 561268, 986882 Specific Applications: 1949-54 Chevrolet Passenger cars 1954-55 (1st Series) Chevy & GMC Trucks
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a windshield wiper blade assembly for 1955-1959 Chevrolet & GMC cars & trucks. Blade assembly is 12" long. Use with TR-24 & TR-25 Wiper Arms. Replaces GM# 3733356 Specific Applications: 1955-1957 Passenger (exc Electric Wiper); 1955-1959 (2nd Series) Truck
For 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This complete windshield wiper blade fits 1959-1972 Chevrolet & GMC cars & trucks. The blade is 15 inches long and is Stainless Steel. Designed to fit with our AF-359 Wiper Arms. Replaces GM# 3819071, 3819074 Specific Applications: 1959-1964 Chevrolet Passenger cars 1967-1972 Chevy & GMC Trucks 1968-1971 Toyota Hilux
For 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks
This blade will work with the GR-94SR, VT-64 and VT-65 wiper arms. This blade is an updated version for the 1937-40's that will give better performance for street rod use.
This is a pair of Windshield Wiper Transmission Mounting Gaskets for 1937 Chevrolet passenger cars. One pair required per car. This rubber gasket prevents water from entering around the wiper transmissions in the cowl. If you are changing the wiper transmissions, be sure to include a set of new gaskets for a proper installation. Inside Dimensions: 1-1/16" x 1-3/16". Replaces GM# 4073727
This is a pair of Wiper Transmission Gaskets for 1938-1939 Chevrolet passenger cars. One pair required per car. Inside Dimensions: 1-3/32" x 1-13/32". Replaces GM# 4081918
This is a pair of Wiper Transmission Gaskets for 1941-1948 Chevrolet passenger cars. One pair required per car. Inside Dimensions: 1-7/64" x 1-21/32". Replaces GM# 4116798
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a Six-Piece Wiper Motor Mounting Kit for 1962-1984 Chevrolet & GMC cars & trucks. Kit includes 3 rubber & metal mounting grommets and 3 hex head mounting bolts. Replaces GM# 4910180, 3824124 Specific Applications: 1962-1984 Chevy & GMC Trucks; 1963-1974 Chevrolet Cars
This is a pair of Windshield Wiper Transmission Mounting Gaskets for 1935 Master & all 1936 Chevrolet passenger cars. One pair required per car. This rubber gasket prevents water from entering around the wiper transmissions in the cowl. If you are changing the wiper transmissions, be sure to include a set of new gaskets for a proper installation. Inside Dimensions: 15/32" x 1-21/32". Replaces GM# 4065094
Note: rebuilt motors are sold on an exchange only basis. If no rebuildable core is exchanged add $45.00 core charge. This part is remanufactured and we must have your rebuildable part (core) as an exchange. You will be charged a core charge that will be refunded upon our receipt of your rebuildable core.
Note: rebuilt motors are sold on an exchange only basis. If no rebuildable core is exchanged add $45.00 core charge. This part is remanufactured and we must have your rebuildable part (core) as an exchange. You will be charged a core charge that will be refunded upon our receipt of your rebuildable core.
This is a Windshield Wiper Switch for 1959-1963 Chevrolet & GMC Cars and Trucks with Single Speed Wiper Motors & Washer. Replaces GM# 1993541, Delco D-6334 Specific Applications: 1959-1963 Passenger Cars; 1960-1963 Chevy & GMC Trucks
For 1959 1960 1961 1962 1963 Chevrolet/GMC Cars and Trucks
This is a Windshield Wiper Switch for 1964 Chevrolet Passenger Cars with Single Speed Wiper Motors & Washer. Replaces GM# 1993542, Delco D-6337 Specific Applications: 1964 Passenger Cars
This is a Windshield Wiper Switch for 1964 Chevrolet Passenger Cars with 2-Speed Wiper Motors. Fists Impala, Bel Air & Biscayne. Replaces GM# 1993643, Delco D-6333
This original reproduction windshield wiper switch fits 1955-1956 Chevrolet passenger vehicles. This switch comes complete with a new stainless steel cable and sheath and can operate both electric and vacuum wiper motors. The body of this switch has a --3/16" overall depth. NOTE: This switch is not compatible with the original 1955 accessory windshield washer kit.
Our modern vehicles have spoiled us to rely on the safety of intermittent wipers. Now you can have this "modern" convenience in your vintage car or truck. This switch is designed to work on all Newport Engineering wiper motors to make your old car as safe as your modern car. NOTE: Will NOT Work on stock electric wiper motors!
This is the 1963 Chevrolet Passenger Car Wiper Motor Transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick trough the cowl.
This is the 1964 Passenger wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick through the cowl.
This is a pair of reproduction Wiper Transmissions (Left & Right) for all 1941-1948 Chevrolet passenger cars, including Sedan Delivery (exc. Station Wagon). These beautifully chromed wiper transmissions come with the linkages attached, ready to install. This is a replacement for 1941 models without rubber bushings. This set has rubber bushings. They include mounting brackets and gaskets. Right side has the long arm and left side a short arm. Replaces GM# 4114813, 4111814, 4125219, 4132644, 4132645
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1937 Chevrolet passenger car windshield wiper transmission & link assemblies. These beautifully chromed wiper transmissions come with the linkages attached, ready to install. Order wiper transmission mounting brackets & gaskets separately. These wiper transmissions can be modified to fit Buick, Olds & Pontiac by extending the length of the linkage arm. Replaces GM# 4073724 & 4073725
1938 Chevrolet passenger car windshield wiper transmission & link assemblies. These beautifully chromed wiper transmissions come with the linkages attached, ready to install. Order wiper transmission mounting brackets & gaskets separately. These wiper transmissions can be modified to fit Buick, Olds & Pontiac by extending the length of the linkage arm. Replaces GM# 4081915, 4081916
1939 Chevrolet passenger car windshield wiper transmission & link assemblies. These beautifully chromed wiper transmissions come with the linkages attached, ready to install. Order wiper transmission mounting brackets & gaskets separately. Modify to fit 1940 passenger cars by using original linkage arms with new chrome transmission heads. Replaces GM# 4089606, 4089607
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want standard two-speed wiper operation. Also available is the same kit with wiper delay switch - see PA-31D. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want standard two-speed wiper operation. Also available is the same kit with wiper delay switch - see PA-30D. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA! The RainGear system will fit all 1953 and 1954 Chevrolet cars with the following known exceptions: Cars with Air-Tique air conditioning systems. In this case, you will need to modify the ducting supplied by Air-Tique and use the original Chevy ducting. Call us for details on this modification. Cross-mount master cylinders will not fit with our RainGear system installed. The kit comes complete less assembly lube, arms and blades, escutcheons and model-specific knobs for the switch. All those stock pieces will fit on our system. Escutcheons are the exterior trim bezels which cover the pivot posts in the cowl. Note that the original escutcheons are required and are not available as an aftermarket item to the best of our knowledge. Please note that the RainGear unit cannot be controlled by any General Motors column-mounted wiper switches. You must use the included switch. This is due to the fact that GM switches control the wiper motor via the ground wire and our systems must be controlled by switching the positive wire.
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want wiper delayed, two-speed wiper operation. Also available is the same kit without wiper delay switch- see PA-31. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want wiper delayed, two-speed wiper operation. Also available is the same kit without wiper delay switch- see PA-30. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA! The RainGear system will fit all 1953 and 1954 Chevrolet cars with the following known exceptions: Cars with Air-Tique air conditioning systems. In this case, you will need to modify the ducting supplied by Air-Tique and use the original Chevy ducting. Call us for details on this modification. Cross-mount master cylinders will not fit with our RainGear system installed. The kit comes complete less assembly lube, arms and blades, escutcheons and model-specific knobs for the switch. All those stock pieces will fit on our system. Escutcheons are the exterior trim bezels which cover the pivot posts in the cowl. Note that the original escutcheons are required and are not available as an aftermarket item to the best of our knowledge. Please note that the RainGear unit cannot be controlled by any General Motors column-mounted wiper switches. You must use the included switch. This is due to the fact that GM switches control the wiper motor via the ground wire and our systems must be controlled by switching the positive wire.
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want standard two-speed wiper operation. Also available is the same kit with wiper delay switch - see PA-32D. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want wiper delayed, two-speed wiper operation. Also available is the same kit without wiper delay switch- see PA-32. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This is a Trico Vcauum Windshield Wiper Motor Rebuild Kit for 1925-1931 Chevrolet & GMC. For vacuum wiper motors - Models KCX, KSB, KSL motors with 1" wide bowls and snap on style covers. Includes paddle and parking seals, bowl gaskets, rivets, grease capsule, grease applicator, and instructions. Made in the USA! We also offer a rebuilding service for your original Trico vacuum wiper motor.
For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks
These wiper savers are a chrome bullet that fits over the wiper transmission splines for displaying at car shows. Sold in pairs, they have a set screw to hold them in place. Approximate Height 1.5"
These windshield wiper transmission brackets fit behind the wiper transmission on 1938-1939 Chevrolet passenger cars. This set includes two brackets, two bolts and two star washers. Replaces GM# 4081917
These windshield wiper transmission brackets fit behind the wiper transmission on 1937 Chevrolet passenger cars. This set includes two brackets, two bolts and two star washers. Replaces GM# 4073726
This is a pair of Wiper Savers - Custom Chrome Caps for any vehicle. Made specifically to remove windshield wiper arms & blades for car shows. Super nice chrome plating. Made in the USA!
This is a universal 6-VOLT Windshield Wiper Motor with Stainless Housing - NO SWITCH. This motor requires an external control switch to operate. NOTE: This motor will not work on GM vehicles with crank up windshields unless the crank mechanism is permanently removed. The shaft is 5" long and the kit includes instructions for shortening the shaft. The wiper motor has an automatic self-parking feature and a 110 degree sweep For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade. For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
THE SHAFT IS 5" LONG AND INCLUDES INSTRUCTIONS FOR SHORTENING THE SHAFT. THIS WIPER MOTOR HAS AN AUTOMATIC SELF PARK AND A 110 DEGREE SWEEP. USE WITH WIPER ARMS VT-60, VT-61, VT-64, OR VT-65 AND WIPER BLADES VT-62, VT-63, VT-66, AF-341SR, OR VT-67.
This is a universal 6-VOLT Windshield Wiper Motor with Black Housing - BUILT-IN ON/OFF SWITCH. The shaft is 3-1/4" long and the kit includes instructions for shortening the shaft down to 2-1/2" long. The wiper motor has an automatic self-parking feature and a 110 degree sweep. Mounting holes are 3-5/8" on center. Machined to accept AF-320 and AF-345 Wiper Arms for stock applications. NOTE: This motor will not work on GM vehicles with crank up windshields unless the crank mechanism is permanently removed. For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade. For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
This is a universal 12-VOLT Windshield Wiper Motor with Black Housing - BUILT-IN ON/OFF SWITCH. The shaft is 3-1/4" long and the kit includes instructions for shortening the shaft down to 2-1/2" long. The wiper motor has an automatic self-parking feature and a 110 degree sweep. Mounting holes are 3-5/8" on center. Machined to accept AF-320 and AF-345 Wiper Arms for stock applications. NOTE: This motor will not work on GM vehicles with crank up windshields unless the crank mechanism is permanently removed. For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade. For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
This is a universal 6-VOLT Windshield Wiper Motor with Stainless Housing - NO SWITCH. This motor requires an external control switch to operate. The kit comes with an adjustable length SLOTTED Adjustable Wiper Arm that is 7-1/4" to 8-1/2" long from the pivot attachment. Slot Style Wiper blade included in the kit is 8" long. The shaft is 2.5" long. The wiper motor has an automatic self-parking feature and a 110 degree sweep. For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade. For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4". NOTE: This motor kit will not work with early 1925-1932 Chevy cars with crank up windshields.
This is a Universal 12-Volt Wiper Motor with Stainless Housing. Motor comes with wiper arm and blade. The shaft is 2-7/16" long and includes instructions for shortening the shaft. This wiper motor has an automatic self park and a 110 degree sweep. Motor overall depth is 3-1/4". For replacement wiper arms see VT-60, VT-61, VT-64 or VT-65. Replacement wiper blades see VT-62, VT-63, VT-66, AF-341SR or VT-67. NOTE: WILL NOT WORK ON EARLY GM VEHICLES WITH CRANK-UP WINDSHIELDS.
This high quality electric replacement is a direct bolt - in for your original vacuum motor. A big improvement over the motors that were previously available - this motor is a 2-speed heavy duty motor. It also has an automatic park position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! Complete with wiring harness. Note: If you are missing the original clip that holds the wiper transmission arms to the motor, order either the GR-87 or GR-87A separately,as this is not included in the motor kit.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch. Note: will not replace an original electric motor.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch. NOTE: Will not work with Factory Radio.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch. NOTE: Will not work with Factory Radio.
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch. NOTE: Will not work with Factory Radio.
This high quality 12 Volt electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch. Made in the USA! NOTE: Will not work with Factory Radio.
