24 Items Found
King Pin Set
This is a King Bolt Set for all 1921-1927 Chevrolet cars & trucks. Dimensions: 9/16" x 7-1/4" OL. Set includes: 2 bolts with castle nuts & 4 bushings.
For 1921 1922 1923 1924 1925 1926 1927 Chevrolet Cars and Trucks
This king pin set fits 1939-1954 Chevrolet passenger cars with independent open knee suspension. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. King pin dimensions are: .866" x 5.31". Bushing OD: 1.0530"; Bushing ID: .8665"; Bushing Height: 1.31". Note: This king pin set has floating bushings and are NOT a press fit type. They do not require reaming. Replaces GM# 603386, 599207
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
This king pin set fits 1937-1940 Chevrolet passenger cars & trucks with straight axles. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. King pin dimensions are: .7335" x 5.18". Note: This king pin set has floating bushings and are NOT a press fit type. They do not require reaming. The bushing OD is .921". Replaces GM# 602690, 602491 for models: GB, HB, JB, KB, KC, KD, KE, KF. Specific Applications: 1937-1940 Chevrolet passenger models with Straight Axles; 1940 Chevy trucks 1/2 ton thru 1 ton.
For 1937 1938 1939 1940 Chevrolet Cars and Trucks
1931-1952 Chevrolet & GMC Utility Truck King Pin Set. Set is complete for both sides. Includes all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. King pin dimensions are: .921 X 5.18". NOTE: The bushings for this king pin set must be pressed into the spindle and reamed to fit the king pin. Bushing OD is 1.048". Replaces GM# 601019 Specific Applications: 1931-1942: 1-1/2 Ton Utility (exc COE, MT, MY) 1946-1950:3/4, 1, 1-1/2 ton (exc (D-D) Double Duty and (SBC) School Bus Chassis) 1951-1952: 3/4, 1 ton (exc (D-D) Double Duty)
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Trucks
This is a new reproduction set of king pins and bushings for 1928-1939 Chevrolet, Pontiac & GMC cars & trucks. This is a complete set for both sides. King pin dimensions are: .732" x 5.18". NOTE: This set requires press fit on the bushings and reaming to fit the shafts. Replaces GM# 602691 Specific Applications: 1928-1930 Chevrolet cars, Chevy & GMC trucks; 1928-1936 Pontiac - 6-cylinder models with straight axle - compare king pin dimensions 1931-1933 Chevrolet cars (except 1933 Standard CC), Chevy & GMC 1/2 ton trucks; 1934-1936 Chevy & GMC 1/2 ton trucks; 1937-1939 Chevy & GMC 1/2, 3/4 & 1 ton trucks
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
This king pin set fits all 1941-1955 (1st Series) Chevrolet & GMC trucks. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. King pin dimensions are .866" x 5.31". Bushing OD 1.055". This king pin set has floating bushings that are pre-machined to fit the pin without reaming. Replaces GM# 605121 Specific Applications: 1941-1942 Chevrolet & GMC 3/4 & 1 Ton Trucks; 1941-1955 (1st Series) Chevrolet & GMC 1/2 Ton Trucks Also available is an oversize king bolt set for axles with excessive wear in the axle bore. See FS-128-10 for .010" OVERSIZE KING PIN SET
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This king pin set fits all 1955-1959 (2nd Series) Chevrolet & GMC 1/2 ton trucks. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. King pin dimensions are (.866" x 5.31"). Bushing dimensions: OD 1.055", ID .867", Length 1.310". Replaces GM# 3755235
For 1955 1956 1957 1958 1959 Chevrolet Trucks
This is a King Pin set for all 1953-1955 (1st Series) Chevrolet & GMC trucks - 3/4 thru 1-1/2 Ton models. King bolt dimensions are: .921" x 5.62". This set includes all necessary pieces to renew both sides. Replaces GM# 3704112
For 1953 1954 1955 Chevrolet Trucks
This is a complete NORS king pin set for 1934-1938 Chevrolet Master & Master Deluxe passenger cars with Dubonnet Knee Action suspensions. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. King pin dimensions are: .864" x 5.543". These are a LIMITED SUPPLY ITEM, availability is subject to stock on hand. Replaces GM# 602689, 603963
For 1934 1935 1936 1937 1938 Chevrolet Cars
This king pin set fits all 1933-1935 Chevrolet Standard passenger cars and is complete for both sides. Set comes with king bolts, lock pins, bushings, thrust bearings, shims & dust caps. Order grease fittings separately. Replaces GM# 601787. These sets are obsolete and we have a limited supply. Availability is subject to stock on hand. King pin dimensions : .733" x 4.45". Bushings must be pressed in place and reamed to fit.
For 1933 1934 1935 Chevrolet Cars
This king pin set fits all 1936 Chevrolet Standard Passenger models FC with straight axles. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. LIMITED SUPPLY ITEM - Availability is subject to stock on hand. Replaces GM# 602032 King Pin dimensions: .732" OD x 4-3/4" long. NOTE: The bushings in this kit are press fit and must be reamed to fit the king pin once the bushings are installed in the spindles.
For 1936 Chevrolet Cars
This king pin set fits 1955-1959 (2nd Series) Chevrolet & GMC 3/4, 1 & 1-1/2 Ton Trucks (Exc. D-D, SBC, HD). Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. King pin dimensions are: .921 X 5.62". Replaces GM# 3720696
For 1955 1956 1957 1958 1959 Chevrolet Trucks
Headlight Assemblies
These are street rod headlights - not original. 12 volt Hi-Tech 7" round quartz halogen headlamps. The bulb in this unit is nearly flat. Set up for use on 1920's and early 1930's cars & trucks. Wires run through the center of the mounting bolt.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
These are street rod headlights - not original. 12 volt Hi-Tech 7" round H4 halogen headlamps. The sealed-beam bulb in this unit is nearly flat. Set up for use on 1920's and early 1930's cars & trucks.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
Mirror Assemblies
This mirror is a reproduction of the original dealer installed GM accessory outside mirror used on 1949-1953 Chevrolet passenger cars (can be used on 1954 cars also). Mirror head is 4-3/8" OD. Arm is mounted offset on back. Prior to 1953, Chevrolet passenger cars were sold without outside mirrors, so there is no factory correct original mirror until 1953. These mirrors were sold and installed by Chevrolet dealers but they are an aftermarket style mirror. NOTE: INSTALLATION REQUIRES DRILLING HOLES. MUST BE SCREWED INTO SHEET METAL - 2" CENTERS. Optional clamp-on bracket VT-57C is also available separately. See also VT-74L & R. Replaces GM# 986305
For 1949 1950 1951 1952 1953 Chevrolet Cars
This mirror is a reproduction of the original dealer installed GM accessory outside mirror used on 1949-1953 Chevrolet passenger cars (can be used on 1954 cars also). Mirror head is 4-3/8" OD. Arm is mounted offset on back. Prior to 1953, Chevrolet passenger cars were sold without outside mirrors, so there is no factory correct original mirror until 1953. These mirrors were sold and installed by Chevrolet dealers but they are an aftermarket style mirror. NOTE: INSTALLATION REQUIRES DRILLING HOLES. MUST BE SCREWED INTO SHEET METAL - 2" CENTERS. Optional clamp-on bracket VT-57C is also available separately. See also VT-74L & R. Replaces GM# 986305
For 1949 1950 1951 1952 1953 Chevrolet Cars
Headlight Assemblies
These are street rod headlights - not original. 12 volt Hi-Tech 7" round quartz halogen headlamps with amber dual filament turn signal bulb mounted inside behind the lens. The lens in this unit is nearly flat. Set up for use on 1920's and early 1930's cars & trucks. Wires run through the center of the mounting bolt.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
These are street rod headlights - not original. 12 volt Hi-Tech 7" round quartz halogen headlamps with amber dual filament turn signal bulb mounted inside behind the lens. The lens in this unit is nearly flat. Set up for use on 1920's and early 1930's cars & trucks. Wires run through the center of the mounting bolt.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
These are street rod headlights - not original. 12 volt Hi-Tech 7" round quartz halogen headlamps with amber dual filament turn signal bulb mounted inside behind the lens. The lens in this unit is nearly flat. Set up for use on 1920's and early 1930's cars & trucks. Wires run through the center of the mounting bolt.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
King Pin Set
This king pin set fits Chevrolet & GMC heavy trucks. Dimensions: 1.109" x 6-3/8". Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. NOTE: The bushings in this kit are press fit and must be reamed to fit the king pin. The reamer used must be long enough to ream both bushings at the same time in order to maintain alignment. Replaces GM# 3691111 Specific Applications: 1946-1955(1st Series) 2 Ton & Cab-Over Engine (COE); 1948-1955(1st Series) 1-1/2 Ton w/H.D.; 1946-1963 UJ, UK, VJ, VK, SBC, D-D (exc. 102" WB)
For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Trucks
OVERSIZE KING PIN SET - DO NOT USE FOR STANDARD INSTALLATIONS - SEE FS-128 This king pin set fits all 1941-1955 (1st Series) Chevrolet & GMC trucks. This set is .010" OVERSIZE - to be used in vehicles where the axle opening is larger than original and a standard king pin would not be tight. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. King pin dimensions are (.876" x 5.31"). Replaces GM# 609882 Specific Applications: 1941-1942 Chevrolet & GMC 3/4 & 1 Ton Trucks; 1941-1955 (1st Series) Chevrolet & GMC 1/2 Ton Trucks
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
Mirror Hardware
This King Bee Mirror mounting clip is used to convert the screw-on VT-57 & VT-74 mirrors into a clamp-on mirror. Mounting holes are 2" centers. Comes with two set screws.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars
Mirror Assemblies
This mirror is a reproduction of the original dealer installed GM accessory outside mirror used on 1937-1948 Chevrolet passenger cars. Mirror head is 4-3/8" OD. Arm is mounted in the center on back. Prior to 1953, Chevrolet passenger cars were sold without outside mirrors, so there is no factory correct original mirror until 1953. These mirrors were sold and installed by Chevrolet dealers but they are an aftermarket style mirror. NOTE: INSTALLATION REQUIRES DRILLING HOLES. MUST BE SCREWED INTO SHEET METAL - 2" CENTERS. Optional clamp-on bracket VT-57C is also available separately. See also VT-57L & R.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This mirror is a reproduction of the original dealer installed GM accessory outside mirror used on 1937-1948 Chevrolet passenger cars. Mirror head is 4-3/8" OD. Arm is mounted in the center on back. Prior to 1953, Chevrolet passenger cars were sold without outside mirrors, so there is no factory correct original mirror until 1953. These mirrors were sold and installed by Chevrolet dealers but they are an aftermarket style mirror. NOTE: INSTALLATION REQUIRES DRILLING HOLES. MUST BE SCREWED INTO SHEET METAL - 2" CENTERS. Optional clamp-on bracket VT-57C is also available separately. See also VT-57L & R.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
24 Items Found