Filters
Narrow results by department:
Axle and Spindle Nut
CHEVROLET 1924-32 CAR/PU AXLE SHAFT NUT 3/4-16 x 13/16"
This axle shaft nut fits all 1924-1930 Chevrolet Passenger Vehicles and 1/2 Ton Trucks. This nut will also fit as a replacement part for 1930-1932 Chevrolet Passenger Vehicles and 1/2 Ton Trucks. The castle nut thread size is 3/4"-16. Hex size: 1-1/8", Height: 13/16". Replaces GM# 123046 SPECIFIC APPLICATIONS: 1924-1929 Pass 1924-1929 1/2 Ton Trucks 1930-1932 Pass (Replacement Only) 1930-1932 1/2 Ton Trucks (Replacement Only)
For 1924 1925 1926 1927 1928 1929 Chevrolet Cars and Trucks
Axle Bearing Gasket
CHEVROLET 1930-32 AXLE BEARING RETAINER GASKET
This is a Rear Axle Bearing Retainer Gasket for 1930-1932 Chevrolet passenger cars & 1/2 Ton Trucks. 10-Bolt pattern. Two gaskets required per vehicle. Replaces GM# 357970
For 1930 1931 1932 Chevrolet Cars and Trucks
CHEVROLET 1925-29 AXLE BEARING RETAINER GASKET
This is a Rear Axle Bearing Retainer Gasket for 1925-1929 Chevrolet passenger cars & 1/2 Ton Trucks. 4-Bolt pattern. Two gaskets required per vehicle. Series K, V, AA, AB. Replaces GM# 344042
For 1925 1926 1927 1928 1929 Chevrolet Cars and Trucks
Axle Bearing Retainer Nut
Axle Key
CHEVROLET 1916-1932 PASS & 1/2 TON REAR AXLE SHAFT KEY
This is an Axle Shaft Key for 1916-1932 Passenger cars & 1/2 Ton Trucks. Overall length is 2.875" x .025" square. Two pieces required per vehicle.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 Chevrolet Cars and Trucks
Axle Bumpers
CHEVROLET 1952-1972 TRUCK FRONT & REAR AXLE BUMPER
This is a rubber Front & Rear Axle Bumper for 1952-1972 Chevrolet & GMC trucks. Dimensions: 1-3/4" x 2-1/4" x 5". Up to four required per vehicle. See applications below. Note: Bolt centers are 4" and may differ from some applications. Check before ordering. Replaces GM# 3700034 Specific Applications: 1952 1 Ton (exc. D-D) - REAR; 1952 1-1/2 Ton - FRONT; 1953-1955 (1st Series) 3/4 & 1 Ton - FRONT & REAR; 1955-1959 (2nd Series) Series 3 - FRONT & REAR; 1957 Series 3A 4WD - REAR; 1960-1962 D-D 4WD - FRONT; 1960-1966 4WD - REAR; 1960-1969 Series 30 - REAR; 1963-1966 Series 20 & 30 (D-D) - FRONT; 1968-1969 Series 20 w/133" Wheelbase (Exc. D-D) - REAR; 1970-1972 Series 20 & 30, D-D (exc. aux. 15,000 or 17,000 springs - REAR
For 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
Axle Hardware
CHEVROLET 1925-32 REAR AXLE SHAFT THICK WASHER
This thick rear axle washer is used on all 1925-1932 Chevrolet Passenger cars & 1/2 Ton trucks (except 1932 models with large axles). Replaces GM# 341705. Two washers required per vehicle. Dimensions: ID .812" x OD 1.460" x .214" Thick.
For 1925 1926 1927 1928 1929 1930 1931 1932 Chevrolet Cars and Trucks
CHEVROLET 1916-23 AXLE SHAFT NUT 5/8" -18
This axle shaft nut fits all 1916-1923 Chevrolet cars and light trucks. Castle nut - hex OD 15/16", height 11/16".
For 1916 1917 1918 1919 1920 1921 1922 1923 Chevrolet Cars and Trucks
Axle Seals
CHEVROLET 1930-33 1-1/2 TON AXLE SEAL - INNER
This is a replacement rear axle INNER seal for 1930-1933 Chevrolet 1-1/2 ton trucks only. In 1930, this seal will work on the Late Series LS only as the axle size was changed mid-year in 1930. Designed for 2" OD at seal surface on axle shaft. Part of assembly GM# 359526 Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.
For 1930 1931 1932 1933 Chevrolet Trucks
CHEVROLET 1946-81 3/4-1TON REAR AXLE SEAL
This is a REAR Inner Bearing Wheel Hub Oil Seal for 1946-1981 3/4 & 1 Ton Chevrolet & GMC trucks with floating rear axle. Dimensions: ID 2.843" (72.210mm), OD 3.944" (100.180mm). Replaces GM# 3686563, 3828916
For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 Chevrolet Trucks
CHEVROLET 1958-64 PASSENGER REAR AXLE SEAL
This Rear Axle Seal fits 1958-1964 Chevrolet passenger cars. Includes seal and O-ring. Dimensions: ID 1.915" or 48.640mm; OD 2.548" or 64.720mm; 0.250" thick or 6.350mm. Replaces GM# 3749981, 3772999
For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars
CHEVROLET 1955-1956 PASSENGER REAR AXLE SEAL
This Rear Axle Seal fits 1955-1956 Chevrolet passenger cars. Includes seal and o-ring. Dimensions: ID 1.880" or 47.75mm; OD 2.414" or 61.320mm; 0.250" thick or 6.350mm. Replaces GM# 3717671, 3730317
For 1955 1956 Chevrolet Cars
CHEVROLET 1930-32 REAR AXLE OUTSIDE SEAL
This Rear Axle Seal fits all 1930-1931 Chevrolet passenger cars & 1/2 ton trucks. It also fits Early 1932 models with Small Taper. Large axle diameter at hub is 1.375, with 13/16" nut. Small axle diameter at hub 1.275 with 3/4" nut. Hub diameter at outer end: Large axle = 1.127"; Small axle = 1.033". Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.
For 1932 Chevrolet Cars and Trucks
CHEVROLET 1933-1954 CAR REAR AXLE SEAL; TRUCK PINION SEAL
This Rear Axle Seal fits 1933-1954 Chevrolet passenger cars. Also fits 1941-1942 3/4 & 1 Ton Trucks as a Differential Pinion Seal. Dimensions: ID 1.578" or 40.08mm; OD 2.408" or 61.16mm; .500" thick or 12.70mm. Replaces GM# 3663166 Specific Applications: 1933-1936 Standard Passenger Models(CC,DC,EC,FC) - Rear Axle Seal; 1937-1954 All Passenger Models - Rear Axle Seal; 1941-1942 Chevrolet & GMC 3/4 & 1 Ton Trucks - Differential Pinion Seal
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
CHEVROLET 1930LATE-33 1-1/2 TON AXLE SEAL - OUTER
This is a replacement rear axle OUTER seal for 1930-1933 Chevrolet 1-1/2 ton trucks only. In 1930, this seal will work on the Late Series LS only as the axle size was changed mid-year in 1930. Part of assembly GM# 359326 Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.
For 1930 1931 1932 1933 Chevrolet Trucks
CHEVROLET 1937-1959 1-1/2 & 2 TON AXLE SEAL - HUB SEAL
This REAR Axle Hub Seal fits 1937-1959 Chevrolet Utility trucks (1-1/2 & 2 Ton models). Dimensions: OD 4.630 (117.62mm); ID 3.173 (80.59mm), Width .438". Replaces GM# 3681195, 3686537 Specific Applications: 1937-1953 Utility: 1952-1959 Utility (exc. 2-Spd Axle)
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 Chevrolet Trucks
CHEVROLET 1933-1963 PICKUP/'1933-1942 CAR REAR AXLE SEAL
This rear axle seal fits 1933-1963 Chevrolet cars & trucks. Dimensions: Thickness: .500" or 12.70mm; OD: 2.782" or 70.66mm; ID: 1.875" or 47.63mm. Replaces GM# 592441. Specific Applications: 1933-1936 Passenger Models (Except Standard CC,DC,EC,FC); 1933-1942 All Commercial; 1946-1963 1/2 Ton Models
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks
CHEVROLET 1939-1949 UTILITY FRONT WHEEL SEAL
This is a FRONT Inner Wheel Seal for 1939-1949 Chevrolet & GMC Utility trucks. This seal is a felt wheel seal with metal casing. Hole in center is 2-7/64" ID with 3.192" OD. The seal has four metal tabs on one side. This is a LIMITED SUPPLY New Old Replacement Stock (NORS) item. Availability is subject to stock on hand. Replaces GM# 3650735, National 5991, Victor 49389, Standard 43-877 Specific Applications: 1939 COE Truck; 1940-1942 1-1/2 Ton & 2 Ton Utility; 1946-1949 SBC, 2 Ton (1st Design)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Trucks
CHEVROLET 1925-31 REAR AXLE INNER SEAL ASSY.
The inner axle seal does the most to prevent oil leaks on early cars & pickups. It is likely that 80-90 year old seals are not doing what they need to do to prevent leaks. Replace this vital seal before you need to replace your brake linings from being oil soaked. Note: This seal is a complete replacement unit for the original inner seal (either cork or leather) used on 1925-1931 Chevrolet passenger cars & 1/2 ton trucks. Comes with a new neoprene seal installed into a new housing. Also see the outer seal replacement RW-41.
For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks
CHEVROLET 1932 REAR AXLE INNER SEAL ASSY.
Note: This seal is a complete replacement unit for the original inner seal (either cork or leather) used on passenger cars & 1/2 ton trucks. Comes with a new neoprene seal installed into a new housing.
For 1932 Chevrolet Cars and Trucks
CHEVROLET 1925-1929 REAR AXLE SEAL KIT
This kit replaces all of the rear axle seals and gaskets for 1925-1929 Chevrolet Passenger & 1/2 Ton Light Duty models. Each kit has two inner neoprene seal assemblies (AF-82); two outer felt seals (AF-370) and two rear axle bearing retainer gaskets (G-3725). Kit will replace seals for both sides.
For 1925 1926 1927 1928 1929 Chevrolet Cars and Trucks
CHEVROLET 1930-1931 REAR AXLE SEAL KIT
This seal kit includes two inner neoprene seal assemblies (AF-82); two outer neoprene seals that replace the felt (Use with the original seal housing); and two outer seal retainer gaskets. This kit gives you all the components necessary to replace the 85 year old original axle seals in a 1930-1931 Chevrolet passenger car & 1/2 ton truck differential. Kit will do both sides.
For 1930 1931 Chevrolet Cars and Trucks
CHEVROLET 1932 REAR AXLE SEAL KIT - SMALL AXLE
This seal kit includes two inner neoprene seal assemblies (AF-506); two outer neoprene seals that replace the felt (RW-41 - Use with the original seal housing); and two outer seal retainer gaskets (G-5547). This kit gives you all the components necessary to replace the 80+ year old original axle seals in a 1932 Chevrolet passenger car & 1/2 ton truck differential WITH SMALL TAPER AXLE. Kit will do both sides. NOTE: In 1932 there were two different size axles used. The small diameter axle has 3/4" diameter threads at the outer end and measures 1.033" OD. The large diameter axle has 13/16" diameter threads at the outer end and measures 1.127". MEASURE YOUR ORIGINAL BEFORE ORDERING THIS KIT.
For 1932 Chevrolet Cars and Trucks
CHEVROLET 1932 REAR AXLE SEAL KIT - LARGE AXLE
This seal kit includes two inner neoprene seal assemblies (AF-506); two outer neoprene seals that replace the felt (RW-183 - Use with the original seal housing); and two outer seal retainer gaskets (G-5547). This kit gives you all the components necessary to replace the 80+ year old original axle seals in a 1932 Chevrolet passenger car & 1/2 ton truck differential WITH LARGE TAPER AXLE. Kit will do both sides. NOTE: In 1932 there were two different size axles used. The small diameter axle has 3/4" diameter threads at the outer end and measures 1.033" OD. The large diameter axle has 13/16" diameter threads at the outer end and measures 1.127". MEASURE YOUR ORIGINAL BEFORE ORDERING THIS KIT.
For 1932 Chevrolet Cars and Trucks
Drop Axle
CHEVROLET 1947-55 1ST SERIES PICKUP 3" DROP AXLE
LOWERS THE TRUCK 3" WHILE RETAINING STOCK SUSPENSION TRAVEL. MADE OF 2" SEAMLESS STEEL TUBING WITH CNC MACHINED ENDS. INCLUDES TIE PLATES. USE CAUTION WITH LOWERED LEAF SPRINGS, MAY RESULT IN BUMP STEER. NOTE: YOU MUST PURCHASE THE FS-255 (1955-59TRUCK) KING BOLT SET WHEN YOU PURCHASE THIS DROP-AXLE! THE 47-54 KING BOLT SET WILL NOT WORK WITH THIS AXLE. ALSO YOU WILL NEED TO UPGRADE TO A MODERN TIE ROD AND ENDS, SEE PART NUMBER 47-TRK.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
CHEVROLET 1955-59 2ND SERIES PICKUP 3" DROP AXLE
LOWERS THE TRUCK 3" WHILE RETAINING STOCK SUSPENSION TRAVEL. MADE OF 2" SEAMLESS STEEL TUBING WITH CNC MACHINED ENDS. INCLUDES TIE PLATES. USE CAUTION WITH LOWERED LEAF SPRINGS, MAY RESULT IN BUMP STEER. NOTE: YOU WILL NEED TO SWITCH TO MODERN STYLE TIE ROD & ENDS - SEE PART NUMBER 55-TRK.
For 1955 1956 1957 1958 1959 Chevrolet Trucks
Hub Puller Tool Rental
CHEVROLET 1930-1932 HUB PULLER RENTAL
This tool is used to pull the rear brake drum on 1930-1932 Chevrolet cars & trucks. Specially designed for this purpose - this tool is an absolute necessity during this procedure. There is a $250.00 deposit on this rental item. You will be charged $35.00 for the rental & $250.00 deposit. Return the tool - in good condition and receive a refund of $250.00 - if returned in good condition within 30 days. Rental is $25.00 per week after 30 days.
For 1930 1931 1932 Chevrolet Cars and Trucks
Rear Axle Conversion Kit
CHEVROLET 1955-1959 TRUCK REAR AXLE CONVERSION KIT
This Rear End Conversion is designed for 1955-1959 Chevy 1/2 Ton Trucks, 3100, 3200. It is a weld-on kit. It ensures a seamless fit. Ideal for restoration projects. This conversion kit allows the installation of any 3" diameter rear end, including GM 10 Bolt, GM 12 Bolt, F-Body 7.5" or Ford 9". It can also be used as a flip kit for a 4" to 5" drop. Welding is required. This kit also provides provisions for modern shock absorber mounting, a vast improvement over the original lever-action shocks. Kit comes with saddles, mounting plates, 3" U-bolts and hardware.
For 1955 1956 1957 1958 1959 Chevrolet Trucks
CHEVROLET 1947-55 PU REAR AXLE CONV. KIT
THIS CONVERSION KIT ALLOWS THE INSTALLATION OF ANY 3" DIAMETER REAR END, INCLUDING GM 10 BOLT, GM 12 BOLT, F-BODY 7.5" OR FORD 9". WELDING IS REQUIRED. THIS KIT ALSO PROVIDES PROVISIONS FOR MODERN SHOCK ABSORBER MOUNTING, A VAST IMPROVEMENT OVER THE ORIGINAL LEVER-ACTION SHOCKS.
For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks
Rear Axle Shafts
CHEVROLET 1930-1931 CAR/PICKUP REAR AXLE SHAFT
This is a direct replacement axle for all 1930 & 1931 Chevrolet passenger cars & 1/2 ton trucks. These are newly manufactured axles that have been machined from Tempered Chrome Moly. Dimensions: Length - 30.812" , Thread Size - 3/4-16, Spline Dia. 1.225". Made in the USA! Replaces GM# 357497 This part is oversize and additional delivery charges will apply. Call or email us for a freight quote.
For 1930 1931 Chevrolet Cars and Trucks
Seals
CHEVROLET 1923-1940 CAR/TRUCK FRONT WHEEL SEAL
This is a FRONT inner wheel seal for 1916-1940 Chevrolet & GMC cars & trucks. This seal is a felt or neoprene replacement seal. Dimensions: 1.77" ID, 2.97" OD. Replaces GM# 335448, 352488, National 5070 Specific Applications: 1923-1930 All Passenger & Truck; 1931-40 Passenger and Commercial (exc Utility or 1933-1936 Standard Passenger)
For 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
Wheel Bearings
CHEVROLET 1958-1964 PASSENGER REAR AXLE BEARING
This is a rear axle bearing for 1958-1964 Chevrolet Passenger Cars. It is a ball bearing and two are required per car. Replaces GM# 907294, ND RW607SY12
For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars
Rear Axle Bearing Race
CHEVROLET 1933-1940 REAR AXLE BEARING INNER RACE
This is a Rear Axle Shaft Bearing INNER RACE for 1933-1940 Chevrolet cars & trucks. Check the condition of this part each time that removal of the rear axle is required. Replaces GM# 111122, Hyatt IR-1502. Specific Applications: 1933-1936 Passenger cars (exc. Standard - CC,DC,EC,FC); 1933-1940 All Truck (exc. Utility, KD,KE,KF)
For 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
Differential Gaskets
CHEVROLET 1925-63 REAR AXLE FILL PLUG GASKET
This is a Differential Fill Plug Gasket for all 1925-1963 Chevrolet & GMC cars & trucks. Dimensions: ID = 1" x OD = 1-3/8". Made in the USA! Replaces GM# 344830
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks
CHEVROLET 1933-1963 DIFFERENTIAL CARRIER GASKET
This rear axle carrier gasket fits 1933-1963 Chevrolet cars & trucks. This is a paper gasket that fits in FRONT of the differential housing and mates to the third member or torque tube assembly. Made in the USA! Replaces GM# 370246 Specific Applications: 1933-1936 All Passenger & Truck(exc. 1933-36 Standard Passenger & Utility); 1937-1942 All Trucks (except Utility); 1946-1963 All 1/2 ton Trucks
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks
CHEVROLET 1933-1963 CAR & TRUCK REAR AXLE COVER GASKET
This rear axle cover gasket fits 1933-1963 Chevrolet cars & trucks. Made in the USA! Replaces GM# 370245 Specific Applications: 1933-1936 All Passenger & Truck (exc. 1933-36 Standard Passenger & Utility); 1937-1942 All Trucks (except Utility); 1946-1963 All 1/2 ton Trucks
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks
CHEVROLET 1946-1972 3/4 & 1 TON DIFFERENTIAL COVER GASKET
This gasket fits 1946-1972 Chevrolet & GMC 3/4 & 1 Ton Trucks. It fits between the differential housing and the stamped steel inspection plate. Made in the USA! 10-9/32" ID X 12-1/4" OD - 10 Holes.
For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
Differential Hardware
CHEVROLET 1963-1991 REAR AXLE VENT - PLASTIC
This rear end vent tube fits 1963-1964 Chevrolet Passenger Vehicles as well as 1963-1991 Trucks. This PLASTIC vent tube is 1-3/8" long and keeps out dirt as well as acts as a necessary pressure relief valve. Fits: 1963-1969 Passenger Cars 1963-1991 Truck 1964-1969orvette 1967-1969 Camaro 1964-1969 Chevelle
For 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 Chevrolet Cars and Trucks
CHEVROLET 1933-1991 DIFFERENTIAL AXLE "C" CLIPS
This is a rear axle "horseshoe" locking clip for 1933-1991 Chevrolet & GMC cars & trucks. Two clips required per vehicle. Replaces GM# 370240, 3833322 Specific Applications: 1933-1936 Passenger & 1/2 Ton Trucks (exc. 1933-1936 Standard Passenger); 1937-1942 1/2 Ton thru 1 Ton Trucks; 1946-1991 1/2 ton Trucks
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 Chevrolet Cars and Trucks
CHEVROLET 1937-1962 REAR END AXLE VENT - SHORT
This rear end vent tube fits 1937-1962 Chevrolet Trucks and Passenger Vehicles. This SHORT steel vent tube is 1-1/8" long and keeps out dirt as well as acts as a necessary pressure relief valve. Fits: 1937-1962 Passenger Cars 1937-1962 Truck 1956-1962 Corvette
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
CHEVROLET 1939-1955 REAR END AXLE VENT - LONG
This rear end vent tube fits 1939-1955 Chevrolet Trucks and Passenger Vehicles. This LONG steel vent tube is 1-3/8" long and keeps out dirt as well as acts as a necessary pressure relief valve. Fits: 1939-1955 Passenger Cars 1939-1955 Truck
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
Drag Link Assemblies
Drivetrain Decals
Decal
CHEVROLET VINTAGE WINDOW DECAL "EATON 2 SPEED AXLE"
These are a high quality reproduction of original decals. They are a self adhesive and easily mount to the inside of your window.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
Trunk Floor Panels
CHEVROLET 1961-1964 TRUNK SHELF PANEL - OVER AXLE
This UPPER trunk floor (over rear axle) fits all 1961-1964 Chevrolet full size passenger cars (exc. Station Wagon). This panel is full width and made in 19 ga. steel. Dimensions:47" wide x 33" high. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1961 1962 1963 1964 Chevrolet Cars
King Pin Set
CHEVROLET 1937-1940 KING PIN SET - STRAIGHT AXLE MODELS
This king pin set fits 1937-1940 Chevrolet passenger cars & trucks with straight axles. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. King pin dimensions are: .7335" x 5.18". Note: This king pin set has floating bushings and are NOT a press fit type. They do not require reaming. The bushing OD is .921". Replaces GM# 602690, 602491 for models: GB, HB, JB, KB, KC, KD, KE, KF. Specific Applications: 1937-1940 Chevrolet passenger models with Straight Axles; 1940 Chevy trucks 1/2 ton thru 1 ton.
For 1937 1938 1939 1940 Chevrolet Cars and Trucks
Spring Bolts
CHEVROLET 1936-1940 CAR FRONT SPRING BOLT-STRAIGHT AXLE
This FRONT spring bolt fits all Chevrolet passenger cars with straight axles. It anchors the front of the front spring to the frame. Two required per car. See also TB-6 for the bushing in the spring. Dimensions: .656" OD 21/32"-11 x 3-3/16". Made in the USA! Replaces GM# 477258 Specific Applications: 1936-1940 Passenger - Models FC, GB, HB, JB, KB
For 1936 1937 1938 1939 1940 Chevrolet Cars
Sector Shafts & Bushings
CHEVROLET 1938-1939 CAR W/STR AXLE-STEERING SECTOR
This steering sector is a NORS (New Old Replacement Stock) - Limited Supply Item. It fits all 1938-1939 Chevrolet passenger cars with straight front axle. - Models HB, KB Replaces GM# 264334, 609940
For 1938 1939 Chevrolet Cars
Axle Bumpers
CHEVROLET 1958-63 REAR AXLE BUMPER W/STUD
1958-63 Bumper, rear axle. Made with metal core and 3/8-16 stud molded in. Replaces #3764438. Used on ALL full size models.
For 1958 1959 1960 1961 1962 1963 Chevrolet Cars
Spring Bumpers
CHEVROLET 1941-54 PASS REAR SPRING/FRAME BUMPER
This rubber bumper fits on the frame of 1941-1954 Chevrolet passenger vehicles and prevents the axle housing from bottoming out on the frame. Two required per car. Replaces GM #3657399, 3692555
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
Tie Rod Assemblies
CHEVROLET 1937-1940 CAR TIE ROD-STRAIGHT AXLE MODELS
This is the steel rod that attaches to the tie rod ends for 1937-1940 Chevrolet passenger cars with Straight Axle. It is the proper length and diameter. It is threaded on both ends for the left & right tie rod ends. Replace yours if it is bent to get more accurate wheel alignment. Made in the USA! Dimensions: 43-1/8" Long with 25/32"-16 Thread, 13/16" OD. Replaces GM# 593047 Specific Applications: 1937-1940 Passenger cars with Straight Axle - Models GB, HB, JB, KB Only NOTE: This item must be shipped in a tube. A tube charge of $8.00 will be applied, in addition to freight charges.
For 1937 1938 1939 1940 Chevrolet Cars
Trailing Arm Assemblies
Filters
Narrow results by department:
