Universal Joint Assemblies
CHEVROLET STEERING COLUMN U-JOINT - 3/4-DD X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET STEERING COLUMN U-JOINT - 3/4-36 X 3/4-DD
SteEring column U-Joint - 3/4-36 x 3/4-DD
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET STEERING COLUMN U-JOINT - 1-DD X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET STEERING COLUMN U-JOINT - 9/16-26 X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.
For 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 Chevrolet Cars and Trucks
CHEVROLET STEERING COLUMN U-JOINT - 1-48 X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET STEERING COLUMN U-JOINT - 3/4-30 X 3/4-DD
SteEring column U-Joint - 3/4-30 x 3/4-DD
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET STEERING COLUMN U-JOINT - 5/8-36 X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET STEERING COLUMN U-JOINT - 13/16-36 X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET 1934-1947 HEAVY TRUCK U-JOINT ASSEMBLY
This is a NOS/NORS Universal Joint for 1934-1940 Chevrolet & GMC 3/4 ton to 1-1/2 ton trucks. Front Yoke = 10-Spline; Rear Yoke = 10-Spline. Replaces GM# 605118. Specific Applications: 1934-1939 1-1/2 Ton Trucks(exc. VE, VF) - Front and Rear; 1937-1947 3/4 & 1 Ton (4-SPD) Front; 1940 1-1/2 Ton Trucks - Model WC - Intermediate When replacing the U-joint, it is also recommended that you install new gaskets on the ball housing and retainer. Use our number FS-125 gasket set.
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 Chevrolet Trucks
CHEVROLET 1940-1948 NORS U-JOINT ASSY-3-SPEED
This is a New Old Replacement Stock (NORS) U-Joint Assembly for 1940-1948 Chevrolet cars & trucks with 3-speed transmission. The assembly includes the front yoke, rear yoke and trunnion in between. Replaces GM# 606779. LIMITED SUPPLY ITEM - availability is subject to stock on hand. Front yoke speedo gear surface OD is 1.375" 10-Spline; Rear yoke is 17 Spline OD is 1.341" When replacing the U-joint, it is recommended that you also replace the ball housing and retainer gaskets. Use our part number FS-125. Also advised is to check the torque tube bushings and rear transmission bushing for wear. NOTE: The trunnion and rear yoke are the same on 1940-1954 passenger & 1/2 ton trucks.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
CHEVROLET 1940-1954 3-SPEED U-JOINT ASSEMBLY
This is a NORS (New Old Replacement Stock) Universal Joint Assembly for all 1940-1954 Chevrolet cars & 1/2 ton trucks with 3-speed transmissions. Dimensions: Front yoke speedo gear surface OD is 1.435" 10-Spline; Rear yoke is 17 Spline OD is 1.341". Replaces GM# 606779, 591642, 591644, 3665768. LIMITED SUPPLY ITEM - availability is subject to stock on hand. When replacing the U-joint, it is recommended that you also replace the ball housing and retainer gaskets. Use our part number FS-125. Also advised is to check the torque tube bushings and rear transmission bushing for wear. NOTE: Trunnion and rear yoke are the same on all 1940-1954 passenger cars & 1/2 ton trucks. Front yoke is 3-Speed Only.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
Universal Joint Gaskets
CHEVROLET 1929-54 UJOINT SEAL KIT-STD TRANS-EXC 33-36STD
This U-joint gasket set fits 1929-1954 Chevrolet & GMC cars & trucks. For 1933-36 Standard models order G-6043 transmission gasket set, which includes the U-joint gaskets. For 1950-1954 Powerglide models order FS-125P. Bolt Centers on collar gaskets are 3-3/4". Made in the USA! Replaces GM# 3723490, 3699727, 348259 Specific Applications: 1929-1940 All Pass & Truck (exc. 1933-1936 Standard, COE); 1941-1953 Passenger, 1/2 & 3/4 Ton (exc 1941-1942 3/4 Ton, Powerglide); 1954 Pass & 1/2 Ton Truck (exc. Auto Trans) A leaky U-joint housing is a very common problem with the enclosed drive line vehicles. This seal set replaces all the seals and shims required to keep gear oil inside, where it is needed. (Note: early models 1929-1933 without a screw-on flange at the rear of ball housing, will require a FS-4356 O-ring seal in addition to this kit).
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
GMC 1937-1954 GMC 1/2 LONGBED U-JOINT GASKET KIT
This Universal Joint Gasket set fits 1937-1954 GMC 1/2 ton, long bed trucks only. Specific gasket set for the short driveshaft section that was used on the long bed 1/2 ton trucks.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 GMC Cars and Trucks
Universal Joint Hardware
CHEVROLET 1940-54 U-JOINT BOLT & LOCK PLATE
This is a replacement U-Joint bolt & lock plate kit - includes 4 bolts and 2 replacement lock plates GM# 3723489
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
CHEVROLET 1940-54 PASS & 1/2 TON U-JOINT BOLT KIT
1940-1954 Universal Joint Bolt Lock Plate Kit Passenger & 1/2 Ton - includes 4 bolts and 2 BA-110 OEM style lock plates.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
Universal Joint Repair Kit
CHEVROLET 1940-1954 UNIVERSAL JOINT REPAIR KIT
This is a U-joint repair kit for all 1940-1954 Chevrolet passenger cars & Chevy & GMC 1/2 ton trucks. The kit consists of: the trunion, 4 bearings, 2 lock plates and 2 snap rings - just like the factory units. Replaces GM# 609944. Grease the inside of the bearing caps before installation. It is also recommended that the ball housing gaskets are replaced when replacing the Universal Joint.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
