FAX: (541) 258-6968
 
43 Items Found
Universal Joint Hardware
Chevrolet Parts -  1940-54 U-JOINT BOLT & LOCK PLATE
BA-130
USD $9.95 SET
CHEVROLET 1940-54 U-JOINT BOLT & LOCK PLATE
This is a replacement U-Joint bolt & lock plate kit - includes 4 bolts and 2 replacement lock plates GM# 3723489

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Universal Joint Repair Kit
Chevrolet Parts -  1940-1954 UNIVERSAL JOINT REPAIR KIT
FS-101
USD $89.95 EA
CHEVROLET 1940-1954 UNIVERSAL JOINT REPAIR KIT
This is a U-joint repair kit for all 1940-1954 Chevrolet passenger cars & Chevy & GMC 1/2 ton trucks. The kit consists of: the trunion, 4 bearings, 2 lock plates and 2 snap rings - just like the factory units. Replaces GM# 609944. Grease the inside of the bearing caps before installation. It is also recommended that the ball housing gaskets are replaced when replacing the Universal Joint.

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Universal Joint Gaskets
Chevrolet Parts -  1929-54 UJOINT SEAL KIT-STD TRANS-EXC 33-36STD
FS-125
USD $18.95 SET
CHEVROLET 1929-54 UJOINT SEAL KIT-STD TRANS-EXC 33-36STD
This U-joint gasket set fits 1929-1954 Chevrolet & GMC cars & trucks. For 1933-36 Standard models order G-6043 transmission gasket set, which includes the U-joint gaskets. For 1950-1954 Powerglide models order FS-125P. Bolt Centers on collar gaskets are 3-3/4". Made in the USA! Replaces GM# 3723490, 3699727, 348259 Specific Applications: 1929-1940 All Pass & Truck (exc. 1933-1936 Standard, COE); 1941-1953 Passenger, 1/2 & 3/4 Ton (exc 1941-1942 3/4 Ton, Powerglide); 1954 Pass & 1/2 Ton Truck (exc. Auto Trans) A leaky U-joint housing is a very common problem with the enclosed drive line vehicles. This seal set replaces all the seals and shims required to keep gear oil inside, where it is needed. (Note: early models 1929-1933 without a screw-on flange at the rear of ball housing, will require a FS-4356 O-ring seal in addition to this kit).

For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks


Chevrolet Parts -  1950-54 U-JOINT SEAL KIT - P/G & HYDRA TRANS
FS-125P
USD $21.95 SET
CHEVROLET 1950-54 U-JOINT SEAL KIT - P/G & HYDRA TRANS
A leaky U-joint housing is a very common problem with the enclosed drive line vehicles. This seal set replaces all the seals and shims required to keep gear oil inside, where it is needed. This U-joint gasket set fits all 1950-1954 Chevrolet cars as well as 1954 1/2 ton trucks with Power Glide or Hydramatic Transmissions and closed drive lines. Flange gasket has 4-1/2" ID with 6-holes. Made in the USA! Replaces GM# 348259, 3692836, 348259 Specific Applications: 1950-1954 All Passenger with Powerglide; 1954 1/2 Ton Truck with Auto Transmission

For 1950 1951 1952 1953 1954 Chevrolet Cars

Ball Joint Assemblies
Chevrolet Parts -  1960-62 1/2 TON UPPER BALL JOINT
FS-348
USD $62.50 EA
CHEVROLET 1960-62 1/2 TON UPPER BALL JOINT
BALL JOINT UPPER

For 1960 1961 1962 Chevrolet Trucks


Chevrolet Parts -  1960-62 TRUCK LOWER BALL JOINT
FS-349
USD $79.50 EA
CHEVROLET 1960-62 TRUCK LOWER BALL JOINT
LOWER BALL JOINT

For 1960 1961 1962 Chevrolet Trucks


Chevrolet Parts -  1963-71 1/2 TON UPPER BALL JOINT
FS-353
USD $19.50 EA
CHEVROLET 1963-71 1/2 TON UPPER BALL JOINT
UPPER BALL JOINT

For 1963 1964 1965 1966 1967 1968 1969 1970 1971 Chevrolet Trucks


Chevrolet Parts -  1963-71 1/2 TON LOWER BALL JOINT
FS-354
USD $20.00 EA
CHEVROLET 1963-71 1/2 TON LOWER BALL JOINT
LOWER BALL JOINT

For 1963 1964 1965 1966 1967 1968 1969 1970 1971 Chevrolet Trucks

Universal Joint Gaskets
Chevrolet Parts -  1925-1933 BALL HOUSING REAR SEAL
FS-4356
USD $0.95 EA
CHEVROLET 1925-1933 BALL HOUSING REAR SEAL
This is a neoprene O-ring seal for 1925-1933 models at the back of the torque tube ball housing. Does not fit 1933-1936 Standard. Use with FS-125 gasket set.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 Chevrolet Cars and Trucks

Universal Joint Assemblies
Chevrolet Parts -  1948-54PU 4-SPEED U-JOINT ASSEMBLY
FS-683
Wait List
CHEVROLET 1948-54PU 4-SPEED U-JOINT ASSEMBLY
This is a NOS/NORS 4-Speed Universal Joint for 1948-1954 Chevrolet & GMC trucks. Replaces GM# 3689266, 3686323, 3665768. LIMITED SUPPLY ITEM - Availability is subject to stock on hand. Specific Applications: 1948-1954 Chevrolet & GMC 1/2 Ton Models with 4-Speed Transmission When replacing the U-joint, it is also recommended that you install new gaskets on the ball housing and retainer. Use our number FS-125 gasket set. NOTE: Trunnion and rear yoke are the same on all 1940-1954 passenger cars & 1/2 ton trucks. Front yoke is 4-Speed 1/2 Ton ONLY.

For 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks


Chevrolet Parts -  1950-54 POWERGLIDE U-JOINT ASSEMBLY-NORS
FS-687
USD $279.50 EA
CHEVROLET 1950-54 POWERGLIDE U-JOINT ASSEMBLY-NORS
This is a NORS Universal Joint for 1950-1954 Chevrolet passenger cars with Powerglide. FRONT YOKE SPEEDO OD IS 1.265". Replaces GM# 3693266, , 3689857, 3665768, 3703214, 3704232. This is a LIMITED SUPPLY ITEM. Availability is subject to stock on hand. NOTE: Trunnion and rear yoke are the same on all 1940-1954 passenger cars & 1/2 ton trucks. Rear yoke is 17 spline with and OD of 1.344". Front yoke is Powerglide only.

For 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1940-1954 3-SPEED U-JOINT ASSEMBLY
FS-688
Wait List
CHEVROLET 1940-1954 3-SPEED U-JOINT ASSEMBLY
This is a NORS (New Old Replacement Stock) Universal Joint Assembly for all 1940-1954 Chevrolet cars & 1/2 ton trucks with 3-speed transmissions. Dimensions: Front yoke speedo gear surface OD is 1.435" 10-Spline; Rear yoke is 17 Spline OD is 1.341". Replaces GM# 606779, 591642, 591644, 3665768. LIMITED SUPPLY ITEM - availability is subject to stock on hand. When replacing the U-joint, it is recommended that you also replace the ball housing and retainer gaskets. Use our part number FS-125. Also advised is to check the torque tube bushings and rear transmission bushing for wear. NOTE: Trunnion and rear yoke are the same on all 1940-1954 passenger cars & 1/2 ton trucks. Front yoke is 3-Speed Only.

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Ball Joint Assemblies
Chevrolet Parts -  1971-72 1/2 TON UPPER BALL JOINT
FS-952
USD $24.95 EA
CHEVROLET 1971-72 1/2 TON UPPER BALL JOINT
1/2 TON UPPER BALL JOINT

For 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1971-87 1/2 TON LOWER BALL JOINT
FS-953
USD $19.50 EA
CHEVROLET 1971-87 1/2 TON LOWER BALL JOINT
1/2 TON LOWER BALL JOINT

For 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks


Chevrolet Parts -  1955-70 CAR UPPER BALL JOINT
RW-213
USD $19.95 EA
CHEVROLET 1955-70 CAR UPPER BALL JOINT
1955-70 CAR UPPER BALL JOINT

For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars


Chevrolet Parts -  1955-57 PASSENGER LOWER BALL JOINT
RW-214
USD $25.95 EA
CHEVROLET 1955-57 PASSENGER LOWER BALL JOINT
1955-57 PASSENGER LOWER BALL JOINT

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1958-70 CAR LOWER BALL JOINT
RW-215
USD $26.95 EA
CHEVROLET 1958-70 CAR LOWER BALL JOINT
1958-70 CAR LOWER BALL JOINT

For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars

Universal Joint Repair Kit
Chevrolet Parts -  1955-72 PASS,1/2 & 3/4T U-JOINT KIT
RW-223
USD $16.95 EA
CHEVROLET 1955-72 PASS,1/2 & 3/4T U-JOINT KIT
1955-70 Passenger Models, 1955-72 1/2 & 3/4 Ton Trucks

For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks

Steering Column Hardware
Chevrolet Parts -  1959-66 STEERING COUPLER RAG JOINT
RW-43
USD $15.95 KIT
CHEVROLET 1959-66 STEERING COUPLER RAG JOINT
1959-66 STEERING COUPLER RAG JOINT

For 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars and Trucks

Universal Joint Assemblies
Chevrolet Parts -  1940-1948 NORS U-JOINT ASSY-3-SPEED
FS-61
Wait List
CHEVROLET 1940-1948 NORS U-JOINT ASSY-3-SPEED
This is a New Old Replacement Stock (NORS) U-Joint Assembly for 1940-1948 Chevrolet cars & trucks with 3-speed transmission. The assembly includes the front yoke, rear yoke and trunnion in between. Replaces GM# 606779. LIMITED SUPPLY ITEM - availability is subject to stock on hand. Front yoke speedo gear surface OD is 1.375" 10-Spline; Rear yoke is 17 Spline OD is 1.341" When replacing the U-joint, it is recommended that you also replace the ball housing and retainer gaskets. Use our part number FS-125. Also advised is to check the torque tube bushings and rear transmission bushing for wear. NOTE: The trunnion and rear yoke are the same on 1940-1954 passenger & 1/2 ton trucks.

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Universal Joint Hardware
Chevrolet Parts -  1940-54 U-JOINT LOCK PLATE - OEM STYLE
BA-110
USD $3.95 EA
CHEVROLET 1940-54 U-JOINT LOCK PLATE - OEM STYLE
OEM STYLE LOCK PLATE

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Steering Column Hardware
Chevrolet Parts -  1958-64 PASS POWER STEERING RAG JOINT-500
58-RJC
USD $59.00 KIT
CHEVROLET 1958-64 PASS POWER STEERING RAG JOINT-500
RAG JOINT CAN EITHER BE WELDED OR ROLL-PINNED INTO PLACE.

For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars

Ball Joint Assemblies
Chevrolet Parts -  1970-80 1/2 & 3/4 TON 4WD UPPER BALL JOINT
ML-14
USD $17.95 EA
CHEVROLET 1970-80 1/2 & 3/4 TON 4WD UPPER BALL JOINT
4WD UPPER BALL JOINT

For 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 Chevrolet Trucks


Chevrolet Parts -  1973-86 1/2 TON UPPER BALL JOINT
ML-15
USD $19.95 EA
CHEVROLET 1973-86 1/2 TON UPPER BALL JOINT
UPPER BALL JOINT

For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 Chevrolet Trucks


Chevrolet Parts -  1971-86 3/4-1 TON UPPER BALL JOINT
ML-16
USD $19.95 EA
CHEVROLET 1971-86 3/4-1 TON UPPER BALL JOINT
UPPER BALL JOINT

For 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 Chevrolet Trucks


Chevrolet Parts -  1963-70 3/4 & 1 TON LOWER BALL JOINT
ML-17
USD $25.00 EA
CHEVROLET 1963-70 3/4 & 1 TON LOWER BALL JOINT
LOWER BALL JOINT

For 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks


Chevrolet Parts -  1970-80 1/2 & 3/4 TON 4WD LOWER BALL JOINT
ML-18
USD $17.95 EA
CHEVROLET 1970-80 1/2 & 3/4 TON 4WD LOWER BALL JOINT
4WD LOWER BALL JOINT

For 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 Chevrolet Trucks


Chevrolet Parts -  1971-86 3/4-1 TON LOWER BALL JOINT
ML-19
USD $24.95 EA
CHEVROLET 1971-86 3/4-1 TON LOWER BALL JOINT
LOWER BALL JOINT

For 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 Chevrolet Trucks

Universal Joint Hardware
Chevrolet Parts -  1940-54 PASS & 1/2 TON U-JOINT BOLT KIT
3723489
Wait List
CHEVROLET 1940-54 PASS & 1/2 TON U-JOINT BOLT KIT
1940-1954 Universal Joint Bolt Lock Plate Kit Passenger & 1/2 Ton - includes 4 bolts and 2 BA-110 OEM style lock plates.

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Steering Column Hardware
Chevrolet Parts -  1955-57 PASS POWER STEERING RAG JOINT-500
55-RJC
USD $49.00 KIT
CHEVROLET 1955-57 PASS POWER STEERING RAG JOINT-500
This steering rag joint is designed for the 500 Series power steering box and original steering column for all 1955-1957 Chevrolet passenger cars. Joint is 3/4-30 spline to DD ends.

For 1955 1956 1957 Chevrolet Cars

Column Repair Kit
Chevrolet Parts -  1955-57 P/S COLUMN REPAIR/INSTALL KIT
5557-OSC
USD $95.00 EA
CHEVROLET 1955-57 P/S COLUMN REPAIR/INSTALL KIT
Required when installing an original steering column with power steering conversion. Brackets require welding.

For 1955 1956 1957 Chevrolet Cars

Universal Joint Repair Kit
Chevrolet Parts -  1960-72 1/2 & 3/4T U-JOINT KIT
AF-436
USD $17.95 EA
CHEVROLET 1960-72 1/2 & 3/4T U-JOINT KIT
1960-72 1/2 & 3/4 Ton Trucks

For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks

Universal Joint Assemblies
Chevrolet Parts -  STEERING COLUMN U-JOINT - 9/16-26 X 3/4-DD
UJ-1
USD $64.00 EA
CHEVROLET STEERING COLUMN U-JOINT - 9/16-26 X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.

For 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 Chevrolet Cars and Trucks


Chevrolet Parts -  STEERING COLUMN U-JOINT - 1-48 X 3/4-DD
UJ-2
USD $64.00 EA
CHEVROLET STEERING COLUMN U-JOINT - 1-48 X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks


Chevrolet Parts -  STEERING COLUMN U-JOINT - 3/4-30 X 3/4-DD
UJ-3
USD $64.00 EA
CHEVROLET STEERING COLUMN U-JOINT - 3/4-30 X 3/4-DD
SteEring column U-Joint - 3/4-30 x 3/4-DD

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks


Chevrolet Parts -  STEERING COLUMN U-JOINT - 3/4-36 X 3/4-DD
UJ-5
USD $59.00 EA
CHEVROLET STEERING COLUMN U-JOINT - 3/4-36 X 3/4-DD
SteEring column U-Joint - 3/4-36 x 3/4-DD

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks


Chevrolet Parts -  STEERING COLUMN U-JOINT - 3/4-DD X 3/4-DD
UJ-6
USD $49.00 EA
CHEVROLET STEERING COLUMN U-JOINT - 3/4-DD X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks


Chevrolet Parts -  STEERING COLUMN U-JOINT - 1-DD X 3/4-DD
UJ-7
USD $59.00 EA
CHEVROLET STEERING COLUMN U-JOINT - 1-DD X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks


Chevrolet Parts -  STEERING COLUMN U-JOINT - 5/8-36 X 3/4-DD
UJ-8
USD $64.00 EA
CHEVROLET STEERING COLUMN U-JOINT - 5/8-36 X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks


Chevrolet Parts -  STEERING COLUMN U-JOINT - 13/16-36 X 3/4-DD
UJ-9
USD $64.00 EA
CHEVROLET STEERING COLUMN U-JOINT - 13/16-36 X 3/4-DD
CNC machined and precision broached for a perfect fit. Stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Works up to a 30° angle. Set screw style.

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks

U-Joint Tools
Chevrolet Parts -  USED 1925-1939 U-JOINT ASSEMBLY TOOL
FS-9580
Wait List
CHEVROLET USED 1925-1939 U-JOINT ASSEMBLY TOOL
This is a used tool, that makes replacing a u-joint a breeze. Works on 1925 - 1939 Chevrolet cars & trucks with a 2-plate U-joint. Save hours of time with this tool, A must have for the tool box. You can buy or rent this tool. Return the tool in good condition within 30 days and receive a refund of $40.00. Please call for a return authorization before sending the tool back to us.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks

Universal Joint Assemblies
Chevrolet Parts -  1934-1947 HEAVY TRUCK U-JOINT ASSEMBLY
605118
USD $150.00 EA
CHEVROLET 1934-1947 HEAVY TRUCK U-JOINT ASSEMBLY
This is a NOS/NORS Universal Joint for 1934-1940 Chevrolet & GMC 3/4 ton to 1-1/2 ton trucks. Front Yoke = 10-Spline; Rear Yoke = 10-Spline. Replaces GM# 605118. Specific Applications: 1934-1939 1-1/2 Ton Trucks(exc. VE, VF) - Front and Rear; 1937-1947 3/4 & 1 Ton (4-SPD) Front; 1940 1-1/2 Ton Trucks - Model WC - Intermediate When replacing the U-joint, it is also recommended that you install new gaskets on the ball housing and retainer. Use our number FS-125 gasket set.

For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 Chevrolet Trucks

Universal Joint Gaskets
GMC Parts -  1937-1954 GMC 1/2 LONGBED U-JOINT GASKET KIT
SA-568
USD $34.50 KIT
GMC 1937-1954 GMC 1/2 LONGBED U-JOINT GASKET KIT
This Universal Joint Gasket set fits 1937-1954 GMC 1/2 ton, long bed trucks only. Specific gasket set for the short driveshaft section that was used on the long bed 1/2 ton trucks.

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 GMC Cars and Trucks

43 Items Found
Copyright ©2024 The Filling Station, LLC
E-mail: fssales@fillingstation.com