1246 Items Found
Showing 1001 thru 1100
Showing 1001 thru 1100
Trunk Weatherstrip
1955-1957 Trunk weatherstrip on decklid. For all passenger Chevrolet & Pontiac models except Station Wagon. Clips are molded into this weatherstrip as original. See 70-1122 for weatherstrip without clips. Replaces GM# 4671940
For 1955 1956 1957 Chevrolet Cars
1949-54 Weatherstrip, deck lid in gutter. Molded wide corners to use with B-161 center section for across front of trunk opening. Molded corners made with each leg approx. 5-3/4” long. All passenger models.
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
This trunk weatherstrip is for all 1948 Chevrolet passenger cars except Aerosedans. The kit consists of the upper seal which is 141" long and the lower seal which is 35". This kit is made in the USA specifically for 1948 passenger cars. Order weatherstrip adhesive 08011 separately.
For 1948 Chevrolet Cars
1937-1939 Seal, deck lid channel hollow. Most GM Sedans where seal installs in channel of body. NOT for coupes where seal is usually mounted on lid. Original configuration. Fourteen (14) feet-six (6) inch strip. Fits 1011, 1019, 1211 and 1219 sedans. Replaces GM# 4091472
For 1937 1938 1939 Chevrolet Cars
1935-36 Weatherstrip, decklid sponge rubber. 3/4” x 3/4” x 14’ (feet) long. For gutter of lid as per sketch. All sedans. Note: Models prior to 1935 did not use deck lid weather-strip (except 1933 trunk sedans). These cars were designed to have water run down a channel and out of the car without weather-stripping.
For 1935 1936 Chevrolet Cars
1953-1954 Chevrolet Trunk Seal Kit with molded corners as original. This Trunk Weatherstrip set is designed from original parts for superior fitment and seal. The set contains the strips and corners that mount to the body and the strip that mounts to the lid. One (1) six foot (6') strip, one (1) eleven foot (11') strip, and one (1) pair of molded corners, provide complete coverage. * Designed from original part so it fits correctly. * Corners and short piece glue directly to the body, long piece glues to the trunk lid. * Replaces GM #4601338, 4603360, 4615298.
For 1953 1954 Chevrolet Cars
1942-48 Aerosedan only
For 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1949-1952 Chevrolet Trunk Seal Kit with molded corners as original. This Trunk Weatherstrip set is designed from original parts for superior fitment and seal. The set contains the strips and corners that mount to the body and the strip that mounts to the lid. One (1) six foot (6') strip, one (1) eleven foot (11') strip, and one (1) pair of molded corners, provide complete coverage. * Designed from original part so it fits correctly. * Corners and short piece glue directly to the body, long piece glues to the trunk lid. * Replaces GM #4601338, 4603360, 4615298.
For 1951 1952 Chevrolet Cars
Trunk Weatherstrip Channel
These are the 1962 Chevrolet passenger car trunk weatherstrip channels for the left and right side.
For 1962 Chevrolet Cars
These are the 1963-64 Chevrolet passenger car trunk weatherstrip channels for the left and right side.
For 1963 1964 Chevrolet Cars
Luggage Compartment Lamp Unit
This is a NOS Chevrolet Accessory Luggage Compartment Lamp unit for all 1953-1954 passenger cars (exc Station Wagon & Sedan Delivery). The Chevrolet Master Parts Book only lists it as a 1953 accessory but should work in the 1954 also. It is in pristine condition, ready to install. It has the original box, instructions and hardware. GM# 986625
For 1953 1954 Chevrolet Cars
Street Rod Weatherstrip
3/8" Wide x 7/32" Tall.
For All Chevrolet Cars and Trucks
3/8" Wide x 1/4" Tall.
For All Chevrolet Cars and Trucks
1/2" Wide x 1/4" Tall.
For All Chevrolet Cars and Trucks
9/16" Wide x 3/8" Tall.
For All Chevrolet Cars and Trucks
7/16" Wide x 7/16" Tall.
For All Chevrolet Cars and Trucks
17/32" Wide x 1/2" Tall.
For All Chevrolet Cars and Trucks
7/16" Wide x 7/16" Tall.
For All Chevrolet Cars and Trucks
13/16" Wide x 11/16" Tall.
For All Chevrolet Cars and Trucks
3/8" Wide x 7/32" Tall.
For All Chevrolet Cars and Trucks
3/8" Wide x 1/4" Tall.
For All Chevrolet Cars and Trucks
1/2" Wide x 1/4" Tall.
For All Chevrolet Cars and Trucks
9/16" Wide x 3/8" Tall.
For All Chevrolet Cars and Trucks
7/16" Wide x 7/16" Tall.
For All Chevrolet Cars and Trucks
17/32" Wide x 1/2" Tall.
For All Chevrolet Cars and Trucks
7/16" Wide x 7/16" Tall.
For All Chevrolet Cars and Trucks
13/16" Wide x 11/16" Tall.
For All Chevrolet Cars and Trucks
3/8" Wide x 7/32" Tall.
For All Chevrolet Cars and Trucks
3/8" Wide x 1/4" Tall.
For All Chevrolet Cars and Trucks
1/2" Wide x 1/4" Tall.
For All Chevrolet Cars and Trucks
9/16" Wide x 3/8" Tall.
For All Chevrolet Cars and Trucks
7/16" Wide x 7/16" Tall.
For All Chevrolet Cars and Trucks
17/32" Wide x 1/2" Tall.
For All Chevrolet Cars and Trucks
7/16" Wide x 7/16" Tall.
For All Chevrolet Cars and Trucks
13/16" Wide x 11/16" Tall.
For All Chevrolet Cars and Trucks
3/8" Wide x 7/32" Tall.
For All Chevrolet Cars and Trucks
3/8" Wide x 1/4" Tall.
For All Chevrolet Cars and Trucks
1/2" Wide x 1/4" Tall.
For All Chevrolet Cars and Trucks
9/16" Wide x 3/8" Tall.
For All Chevrolet Cars and Trucks
7/16" Wide x 7/16" Tall.
For All Chevrolet Cars and Trucks
17/32" Wide x 1/2" Tall.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
7/16" Wide x 7/16" Tall.
For All Chevrolet Cars and Trucks
13/16" Wide x 11/16" Tall.
For All Chevrolet Cars and Trucks
Universal T-Rubber
3/8" Wide x 5/16" Tall.
For All Chevrolet Cars and Trucks
3/8" Wide x 5/16" Tall.
For All Chevrolet Cars and Trucks
Vent Post Seal
30 inch strip. Vent window division bar seals are the vertical sealing surface that is attached to the division post. C-40 is a universal rubber-only substitute for seals that are not offered with a metal core like the originals. Note: In 1955, used on 1st Series only. Compare to 60-663, vent post seal with metal core as original.
For 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a pair of vertical Vent Window Post Seals for 1934-1935 Chevrolet Passenger Cars, including Sedan Delivery (exc Convertible). Vent window division bar seals are the vertical sealing surface that is attached to the division post. These seals have a metal core with attaching tabs just like the originals. Specific Applications: 1934 Passenger Models - Both Master & Standard (exc. Convertible); 1935 Standard Passenger Models
For 1934 1935 Chevrolet Cars
1961-62 Full-size post models.
For 1961 1962 Chevrolet Cars
1933 Master 5 window coupes and 4-door sedans. Styles 33-559, 567. Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1933 Chevrolet Cars
1941-1952 Passenger Vent Window Vertical Seals with metal core, as original. Vent window division bar seals are the vertical sealing surface that is attached to the division post. These seals have a metal core with attaching tabs just like the originals. Specific Applications: 1941-1948 Convertible; 1949-1952 Passenger Models (exc. Convertible or Hardtop)
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars
1939-40 All models except convertible
For 1939 1940 Chevrolet Cars
1941-48 All closed models including Sedan Delivery. Except 1007, 1067 Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1958 Station wagons and Sedan Delivery Vent window division bar seals are the verticle sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1958 Chevrolet Cars
1947-48 Fleetline Aerosedan (style 1007) Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1947 1948 Chevrolet Cars
1949-52 4-door, rear door only. Style #1069
For 1949 1950 1951 1952 Chevrolet Cars
1959-60 All except convertible and hardtop. Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1959 1960 Chevrolet Cars
1963-64 Full-size 2 and 4-door post models.
For 1963 1964 Chevrolet Cars
1955-57 All except convertible and hardtop. Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1955 1956 1957 Chevrolet Cars
1958 2-door and 4-door sedans. Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1958 Chevrolet Cars
1963-64 Impala Sport Coupe and convertible
For 1963 1964 Chevrolet Cars
1963-64 Full-size 4-door hardtops.
For 1963 1964 Chevrolet Cars
1937-38 All passenger models (exc convertible) & 1949-1952 Convertible & Hardtop Vertical Vent Window Post Seals. Vent window division bar seals are the vertical sealing surface that is attached to the division post. These seals have a metal core with attaching tabs just like the originals. Made in the USA by Steele Rubber, Inc.
For 1937 1938 Chevrolet Cars
1955-66 2nd Series Seal, vent window post With metal core and rivet holes as original. All Trucks except G-10 and van. Exactly as original - a nice reproduction.
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
1951-55 1st. series Seal, vent window post Metal core and rivet holes . Made as the original.
For 1951 1952 1953 1954 1955 Chevrolet Trucks
Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1955 1956 1957 Chevrolet Cars
1958 Impala, 1959-60 All hardtop and convertibles. Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1958 1959 1960 Chevrolet Cars
1961-62 Full-size hardtop, convertible and Estate wagon.
For 1961 1962 Chevrolet Cars
Vent Window Weatherstrip
This is a 4-piece Vent Window Rubber Seal Kit for 1964-1966 Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3794815, 3794816
For 1964 1965 1966 Chevrolet Trucks
This is a 4-piece Vent Window Rubber Seal Kit for 1967-1972 Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3925965, 3925966
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
TRUCK VENT WINDOW RUBBER-1PC STYLE - fits 1985-1987 Trucks, 1985-1991 Suburban & Crew Cab Pickups.
For 1985 1986 1987 1988 1989 1990 1991 Chevrolet Trucks
This is a 4-piece Vent Window Rubber Seal Kit for 1951-1955 (1st Series) Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3696027, 3696028
For 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a 4-piece Vent Window Rubber Seal Kit for 1955-1959 (2nd Series) Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. See manufacturer's installation video: Click here to view Replaces GM# 3716603, 3716604 Specific Applications: 1955 - 1959 Chevrolet - Truck 1955 - 1955 GMC - 100 1955 - 1959 GMC - 150 1955 - 1959 GMC - 250 1955 - 1959 GMC - 300 1955 - 1959 GMC - 350-8 1955 - 1959 GMC - 370 1959 - 1959 Chevrolet - 3B 1959 - 1959 Chevrolet - 3C 1959 - 1959 Chevrolet - 3D 1959 - 1959 Chevrolet - 3E 1959 - 1959 Chevrolet - 3F 1959 - 1959 Chevrolet - 3G
For 1955 1956 1957 1958 1959 Chevrolet Trucks
This is a 4-piece Vent Window Rubber Seal Kit for 1960-1963 Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3757729, 3757730
For 1960 1961 1962 1963 Chevrolet Trucks
This is a set of vent window seals for 1973-1980 Chevrolet & GMC trucks. The set consists of two vertical post seals and two main rubber seals for left and right sides. Replaces GM# 6271905, 6271906
For 1973 1974 1975 1976 1977 1978 1979 1980 Chevrolet Trucks
This is a Set of Vent Window Seals for 1981-1985 Chevrolet & GMC trucks. This kit is the two piece design that fits both driver and passenger doors. Be aware that there is a 1 and 2 piece design available for these years. Be sure to purchase the correct ones as they are not interchangeable. See manufacturer's installation video: Click here to view
For 1981 1982 1983 1984 1985 Chevrolet Trucks
This is a 4-Piece Vent Window Seal Set for 1953-1954 Chevrolet passenger cars (exc Convertible or Hardtop). This set includes the main rubber around the front of the vent wings and also the vertical seals on the post. Imported. Replaces GM# 4191718, 4191719.
For 1953 1954 Chevrolet Cars
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal. Note: Vertical division post seals not included. See Part #60-529. Made in the USA by Steele Rubber Products. Replaces GM # 4156296, 4156297 Specific Applications: 1955-1957 Chevrolet Passenger Cars - All Post Models
For 1955 1956 1957 Chevrolet Cars
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal. Note: Vertical division post seals not included. See Part #60-473. Made in the USA by Steele Rubber Products. Replaces GM # 4156644, 4156645. Specific Applications: 1955-1957 Sport Coupe (2dr. Hardtop), Sport Sedan (4dr. Hardtop), Convertible (Cabriolet), Nomad Wagon
For 1955 1956 1957 Chevrolet Cars
1961-62 Full-size hardtop and convertibles and Estate Wagons
For 1961 1962 Chevrolet Cars
1960 All passenger except sport models including El Camino
For 1960 Chevrolet Cars
1963-64 Impala Sport Couple and convertible vent window rubber
For 1963 1964 Chevrolet Cars
1959 All post models including El Camino
For 1959 Chevrolet Cars
1961-62 Full-size post models
For 1961 1962 Chevrolet Cars
1937-1939 Chevrolet Passenger car Main Vent Window Seals - All except Cabriolet Our vent window weather strips are tooled from originals for specific models. This listing may refer to the factory body style to designate usage. That number may be found on the metal plate attached to the firewall or cowl. These sets only include the main rubber sections. Order vertical vent window post seals separately.
For 1937 1938 1939 Chevrolet Cars
1949-52 All except convertible and Bel Air
For 1949 1950 1951 1952 Chevrolet Cars
1946-48 Station wagon vent seals
For 1946 1947 1948 Chevrolet Cars
1958 All 2 & 4-door sedans except Bel Air sport sedan
For 1958 Chevrolet Cars
Vent Window Rubber Seals for 1941-48 All Chevrolet passenger cars (exc Cabriolet, Fleetline Sedan, Aerosedan or Station Wagon). Will also work for replacement on Fleetline 4-door (Style 1069) only). Our vent window weather strips are tooled from originals for specific models. This listing may refer to the factory body style number to designate usage. That number may be found on the Fisher Body metal plate attached to the firewall or cowl. These sets only include the main rubber sections. Made in the USA by Steele Rubber Products, Inc.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1940 All except Cabriolet Our vent window weather strips are tooled from originals for specific models. This listing may refer to the factory body style to designate usage. That number may be found on the metal plate attached to the firewall or cowl. These sets only include the main rubber sections.
For 1940 Chevrolet Cars
1959-60 Hardtop and convertible only
For 1959 1960 Chevrolet Cars
1958 All wagons and sedan delivery
For 1958 Chevrolet Cars
1958 Impala only DOES NOT INCLUDE LEADING EDGE WEATHERSTRIP
For 1958 Chevrolet Cars
Style 1069 - 4-door only.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1949-52 Style 1069 - Styleline 4-door only.
For 1949 1950 1951 1952 Chevrolet Cars
1963-64 Full-size 4-door hardtops
For 1963 1964 Chevrolet Cars
1941-48 Cabriolet only Our vent window weather strips are tooled from originals for specific models. This listing may refer to the factory body style to designate usage. That number may be found on the metal plate attached to the firewall or cowl. These sets only include the main rubber sections.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1937-38 Style 1067 Cabriolet Our vent window weather strips are tooled from originals for specific models. This listing may refer to the factory body style to designate usage. That number may be found on the metal plate attached to the firewall or cowl. These sets only include the main rubber sections.
For 1937 1938 Chevrolet Cars
1934 All except Cabriolet 1935 Styles 1201A, 07A, 71A Our vent window weather strips are tooled from originals for specific models. This listing may refer to the factory body style to designate usage. That number may be found on the metal plate attached to the firewall or cowl. These sets only include the main rubber sections.
For 1935 Chevrolet Cars
1935 styles 1009, 1019 only 1936 Styles 1009, 19; 1201,09, 11, 19, 71 Our vent window weather strips are tooled from originals for specific models. This listing may refer to the factory body style to designate usage. That number may be found on the metal plate attached to the firewall or cowl. These sets only include the main rubber sections.
For 1936 Chevrolet Cars
1246 Items Found
Showing 1001 thru 1100
Showing 1001 thru 1100