Steering Worm Thrust Bearing Race for 1931-1954 Chevrolet cars & trucks. Dimensions: 1-3/4" OD x 1-9/16" ID, 3/8" Thick. Two required per vehicle. Replaces GM# 259782
Specific Applications:
1931-1940 All Chevrolet passenger & truck;
1941-1954 All Chevy passenger (exc. Power Steering)
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This is a Steering Worm Thrust Bearing for Chevrolet cars & trucks. 2 required per vehicle. Replaces GM# 261866
Specific Applications:
1934-36 Master Passenger Models,
1937-40 All Models (Car & Truck)
1941-54 Passenger (exc. Power Steering)
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This is a Steering Worm Thrust Bearing for 1941-1959 Chevrolet & GMC trucks. 2 required per vehicle. Dimensions: ID = .880" (22.58mm), OD = 1.508" (38.30mm). Replaces GM# 179291, Hyatt 10790 S.
Specific Applications:
1941 All Commercial & Utility;
1942-1946 Commercial & Utility (exc. COE);
1947-1955 (1st Series) Commercial & 1-1/2 Ton (exc. SBC);
1955-1959 (2nd Series) Series 3 (exc. D-D)
This is a Steering Thrust Bearing Race for 1941-1959 Chevrolet & GMC trucks. One required per vehicle. Dimensions: OD 1-3/4", ID 1-21/64", 2-5/64 Thick. Replaces GM# 179290, Hyatt 10790 Z.
Specific Applications:
1942-1946 Commercial & Utility (exc. COE);1947-1955 (1st Series) Commercial & 1-1/2 Ton (exc. SBC);
This is the PLAIN STEEL retainer for the lower cab step weatherstrip for 1950-1955 (1st Series) Chevrolet & GMC trucks. This is a replacement for the original design retainer for the weather seal on the lower step. Two retainers are required per truck. Made in the USA! Replaces GM# 3693500
For 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is the STAINLESS STEEL retainer for the lower cab step weatherstrip for 1950-1955 (1st Series) Chevrolet & GMC trucks. This is a replacement for the original design retainer for the weather seal on the lower step. Two retainers are required per truck. Made in the USA! Replaces GM# 3693500
For 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a beautifully Chrome Plated Steering Wheel Horn Ring for Bel Air Series 1955-1956 Chevrolet Passenger Cars. With 3 spokes. Made in the USA! Replaces GM# 760394
This horn contact plate is used on all 1947-1953 Chevrolet & GMC trucks. It is held in place with the steering shaft nut. The fingers of this piece hold the horn button in place with snap-in action. Replaces GM# 758239
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This horn contact plate is used on 1953-1959 Chevrolet & GMC cars & trucks. It is held in place with the steering shaft nut. The fingers of this piece hold the horn button in place with snap-in action. Dimensions: 2-1/2" OD, Center Hub ID 9/16". Replaces GM# 758566
Specific Applications:
1954-1959 Trucks
For 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
This is a 10 ft. Strip of Rear Window Channel for 1929-1936 Chevrolet & GMC trucks with rectangular rear windows. Dimensions: 7/16" High x 25/64" Wide for 3/16" Glass. 10 ft. strip. Made in the USA!
For 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Trucks
For our number 70-66 lower door weatherstrip - to fit 1/4" holes. Replaces #4074821 as required. Doors usually require one clip per every 6". Approximately 26 required for 2 doors.
Use on running board mats or rubber gravel guards for a permanent mounting.
Specially formulated to adhere rubber to metal for industrial purposes.
*NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars
These rare and inexpensive 12 x 18 Black & White photographs are a must for every collector!
All pictures are priced the same: 1 picture......$4.50 each. 3 pictures....$4.00 each. 5 pictures or more....$3.50 each.
This book is a valuable source of interchangeable parts between different years and models of Chevrolet cars and trucks. See also DG-91 Interchangeable Manual for interchange from Chevrolet to Buick - Oldsmobile - and Pontiac.
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars and Trucks
This is a set of 1947-1955 (1st Series) Cab-Over-Engine (COE) step mats. It is a four piece set is for left and right side. Set includes mounting adhesive. Replaces GM# 3686221, 3686222, 3686235, 3686236
NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY. We can remove the adhesive and ship the mats via air or overseas.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a 1955-1957 Chevrolet Convertible Top Bow Assembly.
What's a convertible without its top? This convertible top assembly is new and is a perfect fit for the 1955-1957. If you're thinking about converting a hardtop to a convertible, this convertible top assembly is a must have for the project. The assembly lets you replace any old rusted or damaged bows or headers. Its shipped truck freight in two boxes. The assembly comes with a header and three bows. It is made in Canada. The assembly includes assembly bolts. Mounting brackets are sold separately.
This item must be sent via Truck Freight. Call or email us for a freight quote.
This made in the USA 1959-60 top boot retainer, will keep your top boot in place. It attaches to the rear of the back seat, and holds the front of the top boot to the rear seat. The part is E-coated for added protection against corrosion, and may be top coated to match your interior color.
This is a 1955-1956 Chevrolet passenger car partial "A" pillar. It replaces the lower front door area at the front of the rocker panel. The weld joint extends above the top of the lower door hinge window. Specify Right or Left when ordering.
This is a 1955-1956 Chevrolet passenger car partial "A" pillar. It replaces the lower front door area at the front of the rocker panel. The weld joint extends above the top of the lower door hinge window. Specify Right or Left when ordering.
This is a 1957 Chevrolet passenger car partial "A" pillar. It replaces the lower front door area at the front of the rocker panel. The weld joint extends above the top of the lower door hinge window. Specify Right or Left when ordering.
This is a 1957 Chevrolet passenger car partial "A" pillar. It replaces the lower front door area at the front of the rocker panel. The weld joint extends above the top of the lower door hinge window. Specify Right or Left when ordering.
This is a left hand 1956 outer trunk to quarter panel filler. This is a partial panel filler. The panel filler fits all models, except the Nomads and wagons.
This is a right hand 1956 outer trunk to quarter panel filler. This is a partial panel filler. The panel filler fits all models, except the Nomads and wagons.
Proper drainage starts here with this center 1955-57 convertible drain channel. The channel is located underneath the rear pinchweld behind the rear seat.
This is a left hand 1957 outer trunk to quarter panel filler. This is a partial panel filler. For a full panel version, order 729-68CL. The panel filler fits all models, except the Nomads and wagons.
This is a right hand 1957 outer trunk to quarter panel filler. This is a partial panel filler. For a full panel version, order 729-68CR. The panel filler fits all models, except the Nomads and wagons.
These rare and inexpensive 12 x 18 Black & White photographs are a must for every collector!
All pictures are priced the same: 1 picture......$4.50 each.3 pictures....$4.00 each. 5 pictures or more....$3.50 each.
These rare and inexpensive 12 x 18 Black & White photographs are a must for every collector!
All pictures are priced the same: 1 picture......$4.50 each. 3 pictures....$4.00 each. 5 pictures or more....$3.50 each.
1931-1932 Front Bow Seal Weatherstrip, windshield header-to-front-roof rail. Fine grain sponge rubber. A replacement seal, requires minor trimming to install. Replaces #4009225.
Styles 568 and 571.
This horn parts kit includes the spring, insulators, connector spring and mounting screws for 1958-1966 Chevrolet Passenger vehicles and Chevrolet/GMC trucks. May require some modification to fit some steering wheels.
Specific Applications:
1960-1966 Chevrolet an GMC Trucks
This is a pair of BLACK Vinyl covered windlace for all 1941-1946 Chevrolet & GMC trucks. It mounts on the door opening inside the cab and seals out wind drafts. It has a 3/8" bead and is covered with a quality black vinyl. Enough material is included for the sides and top of two doors. It mounts with a metal strip over the top of the flap and screwed into the door edge. Made in the USA! Replaces GM# 3653999, 3847443
This is a set of 8 stainless steel sheet metal screws to mount the lower cab step seal retainer on all 1950-1955 (1st Series) Chevrolet & GMC trucks. Screws are oval head, phillips enough for two retainers.
For 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
