This is a NOS heater wire harness. Comes with GM box and instructions. It is in very good condition but box has some shelf wear . Only ONE available-first come, first serve!
This is a NOS courtesy lamp kit for Impala and Bel-Air. Comes with GM box, fasteners and instructions. It is in very good condition but box has some shelf wear . Only ONE available-first come, first serve!
This is a NOS courtesy lamp kit for Impala and Bel-Air. Comes with GM box and instructions-NO fasteners. It is in very good condition but box has some shelf wear . Only ONE available-first come, first serve!
This is a NOS courtesy lamp kit for Corvair. Comes with GM box, fasteners and instructions. It is in very good condition but box has some shelf wear . Only TWO available-first come, first serve!
This is a NOS under-dash wire harness for Corvair. Comes with GM box and instructions. It is in very good condition but box has some shelf wear . Only ONE available-first come, first serve!
This is a set of NOS stainless ventshades for 1958 Chev & Pontiac 4/door sedans. Comes in original box with instructions. Very good condition. Only ONE set available. First come, first serve!
This is a NORS (New Old Replacement Stock) Steering Sector Shaft for 1935-1936 Chevrolet Master passenger cars WITH Knee Action suspension - Limited Supply, subject to stock on hand. Replaces GM# 262672
This steering sector is a NORS (New Old Replacement Stock) - Limited Supply Item. It fits all 1938-1939 Chevrolet passenger cars with straight front axle. - Models HB, KB Replaces GM# 264334, 609940
For 1925-1946 Chevrolet cars and trucks. These bumper stops fit inside the metal door dovetail casing. The casing mounts on the door post of the car and receives the door dovetail. One pair required per door. Dimensions: 1.080" Wide x .1.035" High x .573" Thick. Top Recess is .910" wide. See also GR-210, 70-1821, & 60-60. Replaces GM# 3681079, 4220031
Specific Applications:
1929-1936 Chevrolet Cars;
1932-1935 Open Cars
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This is a NORS (New Old Replacement Stock) Steering Sector Shaft for 1935-1936 Chevrolet Master passenger cars WITHOUT Knee Action suspension - Limited Supply, subject to stock on hand. Replaces GM# 262810
This is a NOS Steering gear ball nut for 1941 Chevy comm util exc (coe). Brand new comes in original GM box. Only ONE available. First come, first serve!
This is a NOS 2 Speed (mech. shift) double reduction pinion bearing - LEFT. The cover has a little rust on bearing. New comes in original GM box. Only ONE available. GM# 179339
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars
This is a NOS Ser 10 thru 30 outside mirror unit w/brackets and original hardware non glare for 1960-61 New comes in original GM box. Only ONE available. First come, first serve!
This is a NOS Corvair backup light lamp unit for 1961 New comes with original hardware and bulbs in original GM box. Only ONE available. First come, first serve!
This is a NOS Corvair w/4spd backup lamp adapter unit with original instruction sheet and hardware for 1961-62 New comes in original GM box. Only ONE available. First come, first serve!
This is a NOS Corvair station wagon backup light unit with hardware and bulbs unit is missing one lens and electrical wire chrome is in good condition and lens gaskets are in fair condition for 1961 New comes in original GM box. Only ONE available. First come, first serve!
This is a NOS Station wagon back up lamp unit with bulbs original hardware and instruction sheet for 1962 New comes in original GM box. Only ONE available. First come, first serve!
This is a NOS ash tray dash section for 1949-50 Chevy passenger cars. Comes with clock delete plate and cigarette lighter delete plug. Back of ash tray holder has some light rust, but otherwise in pristine condition. It's painted a dark gray color, but can be painted to match your dash. Comes in original GM box. Only ONE available. First come, first serve!
This is a NOS Station wagon backup light kit with original hardware and instruction sheet has a small chip on back side of lens for 1962 comes in original GM box. Only ONE available. First come, first serve!
This is a NOS Passenger fuse and junction block for 1953-54 comes with original instruction sheet and hardware and original GM box. Only 6 available. First come, first serve!
This is a NOS Passenger back up lamp unit for 1958 Chevrolet Passenger cars (exc. Station Wagon, Sedan Delivery, Impala). Kit comes with original instruction sheet and hardware and original GM box. Only 4 available. First come, first serve!
This is a NOS Chevelle, El Camino, impala back up light unit for 1964 missing switch original GM box. Only 3 incomplete kits available. First come, first serve!
This is a NOS Passenger tissue dispenser for 1951 missing original GM box has crack down center on face cover and is missing one bracket. Only 1 available. First come, first serve!
This is a Digital CD for 1929-1978 Accessory Part Numbers. It is a part number listing of Genuine GM Accessories with a description of the part and years used. The CD is a "Searchable" database, so look ups are quick and easy! This listing will be invaluable at helping identify GM accessory parts that you might find at a swap meet, online, at yard sales, dealerships or in private collections. Enables you to buy the proper accessories for your car or truck,
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions.
This is a NOS Headlight molding for the upper RH . For a 1963 Chevrolet passenger car in the original GM package. Only 1 available. GM# 3827132
This is a NOS SERIES 1200 Black leather arm rest w/black plastic base. Comes in original GM box with hardware. Only 1 available. First come, first serve!
This is a NOS 2DR wagon right of left arm rest(green imitation leather) . Comes in original GM box with hardware. Only 1 available. First come, first serve!
In 1955, used on 1st Series Trucks only. Over the years we have found that two different thicknesses of door weatherstrip are required for 1947-1955 (1st Series) Chevy & GMC trucks. We offer two different thicknesses to allow for loose or tight fitting door gaps. This door edge weatherstrip is a high quality textured sponge rubber, made in the USA! Similar to C-145 but with a shallower 1/2" height compared to C-145 which is 11/16" tall. Use this seal if your door clearances are tight. Use C-145 if you have larger door clearances.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This kit is a complete door weatherstrip kit for both doors on 1947-1949 (early) Chevrolet & GMC trucks. This kit comes with the THINNER profile door weatherstrip 70-331. Kit includes: Door seals 28 ft. of thinner profile door weatherstrip 70-331, 1pr. cab step seals CV-78 and 1pr. cab windlace CV-54 for both sides (this windlace mounts with a flat metal retainer screwed through the flap of the windlace around the door opening inside the cab). 1949 was a transition year for the cab step seal and cab windlace. Compare to your originals before ordering.
Over the years we have found that two different thicknesses of door edge weatherstrip are required for 1947-1955 (1st Series) Chevy & GMC trucks. We offer two different thicknesses to allow for loose or tight fitting door gaps. C-145 is the taller 11/16" height compared to 70-331 which is 1/2" tall. Use the K-123 kit if your door clearances require a heavier seal. Use K-123T if you have tighter door clearances and require thinner door edge weatherstrip.
Don't know how to tell if you need thicker or thinner? Use some clay or putty pressed into the door edge where the weatherstrip will mount. Close the door and measure the thickness of the putty. Keep in mind that each door has 14 feet of weatherstrip and the pressure to close the door is increased exponentially as the weatherstrip gets thicker .
This kit is a complete door weatherstrip kit for both doors on 1949 (late)-1955 (1st Series) Chevrolet & GMC trucks. This kit comes with the THINNER profile door weatherstrip 70-331. Kit includes: Door seals 28 ft. of thinner profile door weatherstrip 70-331, 1pr. cab step seals CV-313 and 1pr. cab windlace CV-30 for both sides (this windlace mounts into spot welded channel around the door opening inside the cab). 1949 was a transition year for the cab step seal and cab windlace. Compare to your originals before ordering.
Over the years we have found that two different thicknesses of door edge weatherstrip are required for 1947-1955 (1st Series) Chevy & GMC trucks. We offer two different thicknesses to allow for loose or tight fitting door gaps. This door edge weatherstrip is a high quality textured sponge rubber. C-145 is the taller 11/16" height compared to 70-331 which is 1/2" tall. Use the K-124 kit if your door clearances require a heavier seal. Use K-124T if you have tighter door clearances and require thinner door edge weatherstrip.
Don't know how to tell if you need thicker or thinner? Use some clay or putty pressed into the door edge where the weatherstrip will mount. Close the door and measure the thickness of the putty. Keep in mind that each door has 14 feet of weatherstrip and the pressure to close the door is increased exponentially as the weatherstrip gets thicker .
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This Universal Window Channel Felt Liner is used to re-line 9/16" Door Window Channel in early cars & trucks that have a metal rim on the glass. Chevrolet hardtop and convertible models as well as Chevy & GMC trucks would use this felt to repair original rigid metal vent window post channels when the felt is worn out or missing. These pieces are 33 inches long and 1-3/4 inches wide to be used on 9/16" wide channel. The strips have a glued back with peel-off strips for easy installation. Two strips to a package.
For 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars and Trucks
1932-1935 Roadster & Phaeton Windshield Header Seal (May fit 1931 also)Fine grain sponge rubber. A replacement seal, this is sold by the foot. Fits Roadster & Phaeton convertible tops only.
These kits are specifically for 1962 thru 1966 Chevrolet & GMC Suburban's! This sliding quarter window gasket set is for vehicles that have the sliding quarter windows towards the front, near the doors. The set contains the left and right seals with properly molded corners for a precise factory fit, as well as beltline weatherstrip and flexible run channels. Seal set is for two windows. In addition - we also have the seals for 1962-66 models with a fixed side window.
These kits are specifically for 1962 thru 1966 Chevrolet & GMC Suburban's! This sliding quarter window gasket set is for vehicles that have the sliding quarter windows towards the rear of the vehicle. The set contains the left and right seals with properly molded corners for a precise factory fit, as well as beltline weatherstrip and flexible rub channels. Seal set is for two windows. In addition - we also have the seals for 1962-66 models with a fixed side window.
These bushings fit the top latches of 1961-1964 Chevrolet convertibles. These are the bushings that act as guides for the convertible top when they go into the latch. Comes with retainers.
For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 Chevrolet Cars
This is a Rear Axle Shaft Bearing INNER RACE for 1933-1940 Chevrolet cars & trucks. Check the condition of this part each time that removal of the rear axle is required. Replaces GM# 111122, Hyatt IR-1502.
Specific Applications:
1933-1940 All Truck (exc. Utility, KD,KE,KF)
For 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
This inner door brace rubber fits between the inner door support brace and the outer door skin on 1937-1946 Chevrolet trucks. Each set includes 2 pieces, both measuring 3/8" X 1-1/2" X 16". 1937-1938 models require 1 16" length per door, while 1940-1946 models require 2 16" lengths per door.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This set of retainers and screws secure the weatherstrip on the side of the door of 1955-1959 Chevrolet and GMC trucks. One set does one door. In 1955 fits 2nd Series only.
These seals are sold in a straight section to seal the two rear quarter windows on 1947-1955 (1st Series) Chevrolet and GMC trucks with deluxe cabs. This four piece set comes with CHROME locking strips. Length is 46 inches and it will seal two corner windows on custom cabs. Replaces GM# 3847414, 3847415
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This glass setting channel liner used to hold the window glass to the channel and also provide a weather seal for the window mechanism in 1941-1954 Chevrolet Sedans. Four Piece set.
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
These hood ledge seals fit at the side of the hood ledge at the cowl on 1942-1948 Chevrolet Passenger vehicles. One pair required per car, replaces GM# 3663805. See 60-91 for USA made seals.
This kit includes parts needed to rebuild 1937-1940 Chevorlet and GMC truck steering boxes. This kit includes 2 steering worm thrust bearings, 2 thrust bearing races, 1 pitman shaft seal, 2 pitman shaft bushings and steering box cover gaskets. Does not include sector shaft.
This kit includes parts needed to rebuild 1941-1946 Chevrolet and GMC truck steering boxes. This kit includes 2 steering worm thrust bearings, 1 thrust bearing race, 1 pitman shaft seal, 2 pitman shaft bushings and steering box cover gaskets. Does not include sector shaft.
For 1941 1942 1944 1945 1946 1947 Chevrolet Trucks
This superior quality door weatherstrip fits on the door opening of the cab for all 1960-1966 Chevrolet & GMC trucks. This weather strip is metal reinforced where it mounts onto the cab for durability and strength, eliminating the need for adhesive. A quality part with great fit! Sold in pairs, left and right. Replaces GM# 3767156
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a pitman arm assembly for 1973-1990 Chevrolet & GMC trucks MANUAL Steering. Replaces GM# 6270305, 14013039, 4419718
Specific Applications:
1983-1990 P20 & P30 (exc. P30 Motor Home Chassis);1987-1990 R10, R20, R30 Suburban & Crew Cab Pickup 2WD
This is a pitman arm assembly for 1969-1972 Chevrolet & GMC trucks with MANUAL Steering. Replaces GM# 335208, 3941726, 3944982, 14002552
Specific Applications:
1969-1972 Blazer & Suburban (except Power Steering);1971-1972 G-10 thru G-30 Van
This is a pitman arm assembly for 1968-1972 Chevrolet & GMC trucks WITH Power Steering. Replaces GM# 335206, 3933376, 3941727, 14002553
Specific Applications:
1969-1972 C10, C20, C30, P10, P20, P30, Pickup, Blazer & Suburban (2WD)
Clock Description:
14 inches across
Plugs into any 110 outlet
Quartz movement runs from AA battery
1 year manufacturer warranty
Note: Flat Rate Shipping Charge for Continental USA = $17.00 each; AK & HI = $25.00; Canada = $39.00; Other Countries $69.00
This rubber bumper fits on the frame of 1941-1954 Chevrolet passenger vehicles and prevents the axle housing from bottoming out on the frame. Two required per car. Replaces GM #3657399, 3692555
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
This is the electric switch for 1963 Chevrolet convertible tops as well as 1963 Chevrolet Impala wagon electric tailgates. Replaces GM #4634122.
FITS:
1963 IMPALA STATION WAGON TAILGATE SWITCH
This quarter window weatherstrip fits 1969-1972 Chevrolet Blazers and 1970-1972 GMC Jimmys with SINGLE WALL TOPS only. This application goes first on the glass and is installed using the rope-in method. Fits both left or right side. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish.
Specific Applications:
1970 - 1972 GMC - Jimmy
This horn parts kit includes the spring, insulators, connector spring, horn contact bushings, mounting screws and retainer for 1967-1968 Chevrolet and GMC trucks. This kit also includes an additional horn contact for 1960-1966 truck horns.
This Lock Strip Installation Tool is specifically designed for self-locking two-piece rubber window seals. The eye of the tool threads locking strip into the groove and inserts it into the channel. Multiple head sizes for different sized lock strips.
Tool makes installing the lock strip into the main rubber seal much easier as it will spread the main rubber while being pulled through the groove.
This cold knife comes complete with a strong steel blade sharpened to a fine cutting edge. A large durable handle combined with a steel cable pull assures an easy and fast cutting of adhesive around windshields.
This #6 Stainless Steel screw is used to secure the beltline felts to the door frame. This screw is self tapping and does not require pre-drilling. Specify FLAT HEAD or PAN HEAD when ordering.
This #6 Stainless Steel screw is used as an alternative to staples when securing the beltline felts to the door frame. This screw is self tapping and does not require pre-drilling. Specify FLAT HEAD or PAN HEAD when ordering.
This is a 4-Piece Vent Window Seal Set for 1953-1954 Chevrolet passenger cars (exc Convertible or Hardtop). This set includes the main rubber around the fronnt of the vent wings and also the vertical seals on the post. Imported. Replaces GM# 4191718, 4191719.
This is a pair of PUSH-ON Door Weatherstrip for 1967-1972 Chevrolet & GMC trucks. The rubber has a metal channel molded into it for easy installation without adhesive! Each channel has a mitered corner to match the door openings. This kit will do both doors. Replaces GM# 3951813, 3951814
See manufacturer's installation video: Click here to view
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a PUSH-ON Door Weatherstrip Seal Set for 1969-1972 Chevrolet Blazer & GMC Jimmy. Set is for both doors. Includes special cap at top of windshield header.
These are a push on style door seal which alleviates the need of messy weatherstrip glue. Just press it on and you're done! They mount on the pinchweld of the body and fits the driver side and passenger side. It's made from high quality ozone resistant EPDM rubber. Replaces GM# 6270851 & 6270852
Specific Applications:
1970-1972 GMC Jimmy
LIMITED SUPPLY - This cap is being discontinued by our supplier and stocks are low. CLOSEOUT PRICING UNTIL STOCK IS GONE - ORDER NOW!This baseball cap is BLACK with "GM Genuine Parts" logo on patch.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
1931 Passenger & Truck;
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
This item is oversize and special crating & freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
This item is oversize and special crating & freight charges will apply. Call or email us for a freight quote.
This 15" metal sign is crafted with a dome shape and hemmed edges. This sign features the classic "We Use Genuine Chevrolet Parts" dealer sign. A beautiful piece, perfect for the garage or home decor of any vintage vehicle enthusiast.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand.
This item is oversize and special freight charges will apply. Call or email us for a freight quote.