1941 CLOSED CAR FRONT DOOR SEAL KITKits are complete materials to do most doors. Individual pieces of the kits are available. This kit is sold as a complete set for two doors.
1935-36 Closed ModelsKits are complete materials to do most doors. Individual pieces of the kits are available. This kit is sold as a complete set for two doors.
This is a complete set of five grille teeth for all 1954 Chevrolet passenger cars. Replaces these GM part numbers: 3705309, 3705310, 3705311, 3705312, 3705313.
These rare and inexpensive 12 x 18 Black & White photographs are a must for every collector!
All pictures are priced the same: 1 picture......$4.50 each. 3 pictures....$4.00 each.5 pictures or more....$3.50 each.
In 1955, used on 1st Series Trucks only. Over the years we have found that two different thicknesses of door weatherstrip are required for 1947-1955 (1st Series) Chevy & GMC trucks. We offer two different thicknesses to allow for loose or tight fitting door gaps. This door edge weatherstrip is a high quality textured sponge rubber. Similar to 70-331 but with a taller 11/16" height compared to 70-331 which is 1/2" tall. Use this seal if your door clearances require a heavier seal. Use 70-331 if you have tighter door clearances.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
Exact original profile for these years. Most models. Please measure doors for required length. Good substitute for 1937-38 street rods as a replacement for 70-411.
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
30 inch strip. Vent window division bar seals are the vertical sealing surface that is attached to the division post. C-40 is a universal rubber-only substitute for seals that are not offered with a metal core like the originals. Note: In 1955, used on 1st Series only. Compare to 60-663, vent post seal with metal core as original.
For 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
These weather strips and window channels are specifically for 1955 thru 1966 Chevrolet & GMC Suburban's! The early Suburban's had rounded corners on the side windows. Our CD-25 & CD-26 kits are for these trucks. The later design had a sharp bend on the corners and the rubber seals are now available for them! In addition - we also have the seals for 1962-66 models with a fixed side window. Do a Suburban "Seal Up" with these great parts!
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Trucks
These weather-strips and window channels are specifically for 1955 thru 1966 Chevrolet & GMC Suburban's! The early Suburban's had rounded corners on the side windows. Our CD-25 & CD-26 kits are for these trucks. ONE KIT DOES ONE WINDOW. The later design had a sharp bend on the corners and the rubber seals are now available for them! In addition - we also have the seals for 1962-66 models with a fixed side window. Do a Suburban "Seal Up" with these great parts!
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Trucks
This is a 10 foot long windshield seal for 1936-1946 Chevrolet & GMC trucks. In 1936, used on Low Roof Cabs only. Strip must be trimmed to length. For 1937-1946 Trucks, we offer a one-piece vulcanized seal - See 60-481 or 60-447
This is a RIGHT Convertible Top Latch Handle Handle assembly for 1961-1964 Chevrolet Full Size Convertibles. Specify Right or Left when ordering. Also fits 1962-1963 Nova
This is a LEFT Convertible Top Latch Handle Handle assembly for 1961-1964 Chevrolet Full Size Convertibles. Specify Right or Left when ordering. Also fits 1962-1963 Nova.
This hood-to-cowl rubber seal fits 1947-1955 (1st Series) Chevrolet & GMC trucks. 5/8" x 7/32". One 66 inch strip. See DS-106R for retainer clips.GM# 3688792
This is a Windshield Seal for 1947-1953 Deluxe Chevrolet & GMC Trucks with Stainless Reveal MoldingsThis windshield channel is a vulcanized one-piece unit with division bar rubber molded into the ring. When listed as "no reveal or "reveal" models, this indicates whether the vehicle originally came with stainless molding around the windshield gasket. Reuse your original stainless trim or purchase new trim to be used with "Reveal" molding seals. Replaces GM# 3684695
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This seal is sold in a straight section to seal the LARGE rear window on 1955-1966 Chevrolet and GMC trucks with deluxe cabs. This two piece set comes with a BLACK locking strip. Length is 157 inches and it will seal one back window. Replaces GM# 3847414, 3847415
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This seal is sold in a straight section to seal the LARGE rear window on 1955-1966 Chevrolet and GMC (2nd Series) trucks with deluxe cabs. This two piece set comes with a BLACK locking strip. Length is 157 inches and it will seal one back window. Replaces GM# 3847414, 3847415
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a hood and trunk rubber bumper for 1942-1955 Chevrolet passenger cars. Molded with clearance for screw. Sold in pairs. Replaces GM# 4137121.
Specific Applications:
1949-1950 Passenger - Trunk;1949-1955 Passenger - Hood to Cowl
For 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars
These lower window seals fit on the outer edge of 1947-1955 1st Series Chevrolet and GMC Pickups. These 27" seals are the correct length for 1947-1950 models without wing windows, for models with wing windows these seals must be cut to length. One pair required per truck.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a 4-piece Vent Window Rubber Seal Kit for 1955-1959 (2nd Series) Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3716603, 3716604
This is a pair of BLACK Truck Cab Door Windlace that is held in a spot welded channel on the inside door opening. Fits Mid 1949-1955 (1st Series) Chevrolet & GMC Trucks. Two 12 Foot Strips. Replaces GM# 3692458
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a pair of GREY Truck Cab Door Windlace that is held in a spot welded channel on the inside door opening. Fits Mid 1949-1955 (1st Series) Chevrolet & GMC Trucks. Two 12 Foot Strips. Replaces GM# 3692458
For 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
3/4" diameter x 5/16" thick. Self-retaining for 1/4" hole in sheet metal. Used as a grille to hood and trunk cushion. Compare to PO-B. Replaces GM# 3655015, 4595786
Specific Applications:
1949-1954 Passenger - Trunk
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks
This is a 4-piece Vent Window Rubber Seal Kit for 1960-1963 Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3757729, 3757730
This hood-to-cowl rubber seal fits 1940 & 1941 Chevrolet passenger cars and 1940-1946 Chevrolet & GMC trucks. 5/8" x 7/32". One eight (8) foot strip. Replaces GM# 3654168. 1940-1941 trucks may have used FS-285 fabric hood lace with wire insert instead of rubber. See DS-106R for retainer clips.
For 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This is a 4-piece Vent Window Rubber Seal Kit for 1964-1966 Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3794815, 3794816
This is a 4-piece Vent Window Rubber Seal Kit for 1951-1955 (1st Series) Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3696027, 3696028
This is a set of vent window seals for 1973-1980 Chevrolet & GMC trucks. The set consists of two vertical post seals and two main rubber seals for left and right sides. Replaces GM# 6271905, 6271906
For 1973 1974 1975 1976 1977 1978 1979 1980 Chevrolet Trucks
This seal is sold in a straight section to seal the small rear window on 1942-1966 Chevrolet and GMC trucks. This two piece set comes with a black rubber locking strip. Length is 92 inches and it will seal either one back window or two corner windows on custom cabs. Replaces GM# 3847414, 3847415
NOTE: 1942 trucks had an early style rear window with a die cast retainer. This series truck requires a different rubber seal. For this style, see our part number 60-496.
This seal is sold in a straight section to seal the small rear window on 1942-1966 Chevrolet and GMC trucks. This two piece set comes with a CHROME locking strip. Length is 92 inches and it will seal one small back window. Replaces GM# 3847414, 3847415
NOTE: 1942 trucks had an early style rear window with a die cast retainer. This series truck requires a different rubber seal. For this style, see our part number 60-496.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
The windshield channels are vulcanized one-piece units with division bar rubber molded into the ring. When listed as "no reveal or "reveal" models, this indicates whether the vehicle originally came with stainless molding around the windshield gasket.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
These seals are sold in a straight section to seal the two rear quarter windows on 1947-1955 (1st Series) Chevrolet and GMC trucks with deluxe cabs. This four piece set comes with BLACK rubber locking strips. Length is 46 inches and it will seal two corner windows on custom cabs. Replaces GM# 3847414, 3847415
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a permanent aluminum door jamb Service Record Tag. It has an adhesive back with the Super Chevrolet Service Logo. Appropriate for 1940's thru 1970's Chevrolet cars & trucks.
For 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks
This filler is used to hold the window glass to the channel and also provide a weather seal for the window mechanism. THIS IS ENOUGH FOR A 2/DOOR SEDAN-ORDER TWO SETS FOR A 4/DOOR SEDAN
