This is a NOS Steering gear ball nut for 1941 Chevy comm util exc (coe). Brand new comes in original GM box. Only ONE available. First come, first serve!
This is a NOS Passenger fuse and junction block for 1953-54 comes with original instruction sheet and hardware and original GM box. Only 6 available. First come, first serve!
This is a NOS under-dash wire harness for Corvair. Comes with GM box and instructions. It is in very good condition but box has some shelf wear . Only ONE available-first come, first serve!
This is a NOS heater wire harness. Comes with GM box and instructions. It is in very good condition but box has some shelf wear . Only ONE available-first come, first serve!
This is a NOS Chevelle, El Camino, impala back up light unit for 1964 missing switch original GM box. Only 3 incomplete kits available. First come, first serve!
This is a NOS Passenger tissue dispenser for 1951 missing original GM box has crack down center on face cover and is missing one bracket. Only 1 available. First come, first serve!
LIMITED SUPPLY ITEM - One set available. This is a Used set of Yankee Roadside "Reflector - Flare". Looks to be from the 1940's or 1950's. Set comes with three double sided self standing reflectors with two reflector discs on each side of each reflector. This set really looks to be unused. There are three reflectors, three red flags with wire flag holders and the original carry case. The flags are made of very thin material which is fragile due to age, yet new looking. See photos on how these are set up. Would look good in a car display at a car show. Included is a copy of assembly instruction sheet copied from the internet - original instructions were not in this set. A fun and unique item to display with your old car or truck!
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This is an original 1931 Chevrolet Accessory Radiator Stone Guard that has been re-chromed. This accessory was designed to protect the radiator from rocks and other debris that is thrown up from vehicles while driving. Dimensions: 32-3/4" High x 18-3/4" Wide x 1/2" Thick. Replaces GM# 363153 Specific Applications: 1931 Passenger & Truck; 1932 Truck This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This is an Accessory Sedan Extension Trunk for 1931-1932 Sedans. Special matching trunk rack is required for mounting onto the car - not available. This rare factory accessory trunk has a front panel that extends out to accept additional storage. The piano hinge operates properly. The trunk has surface rust overall but it is not rusted out anywhere. No hardware is included with this trunk. Sold AS IS. See photos. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a printed listing of 1929-1978 Accessory Part Numbers. It is a part number listing of Genuine GM Accessories with a description of the part and years used. This listing will be invaluable at helping identify GM accessory parts that you might find at a swap meet, online, at yard sales, dealerships or in private collections. Enables you to buy the proper accessories for your car or truck,
This is a Digital CD for 1929-1978 Accessory Part Numbers. It is a part number listing of Genuine GM Accessories with a description of the part and years used. The CD is a "Searchable" database, so look ups are quick and easy! This listing will be invaluable at helping identify GM accessory parts that you might find at a swap meet, online, at yard sales, dealerships or in private collections. Enables you to buy the proper accessories for your car or truck,
This is a NOS air compressor assembly crankshaft housing unit for 1958-1959 Chevrolet car with very rare Accessory Air Suspension. It is in excellent condition and ready to install. Original box falling apart but included. GM# 5544518
This is a NOS Air Conditioning circuit board and high blower override switch for 1971-1973 Chevrolet, Oldsmobile, Pontiac, & Buick Full Size cars & 1974 G Series Vans. Original rough condition box included. Only one available. GM# 1223345, 7933330, 7934753 Specific Applications: 1971-1973 Passenger with C.A.C (exc. Auto Temp Control); 1974 G-1, 2, 3 Van with Air Conditioning
This is a Rear Axle Shaft Bearing INNER RACE for 1933-1940 Chevrolet cars & trucks. Check the condition of this part each time that removal of the rear axle is required. Replaces GM# 111122, Hyatt IR-1502. Specific Applications: 1933-1936 Passenger cars (exc. Standard - CC,DC,EC,FC); 1933-1940 All Truck (exc. Utility, KD,KE,KF)
For 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
This is a NOS Station wagon backup light kit with original hardware and instruction sheet has a small chip on back side of lens for 1962 comes in original GM box. Only ONE available. First come, first serve!
This is a NOS backup lamp unit for 1961 Brookwood and Parkwood station wagon. It is in good condition and ready to install. Original box included, but missing lid to box. Also missing wiring harnesses, fasteners and bulbs This item came from a large collection of New Old Stock (NOS) items purchased recently from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS backup lamp unit for 1961 Brookwood and Parkwood station wagon. It is in pristine condition and ready to install. Original box included. Only SIX available-first come, first serve! GM# 985074
This is a NOS Corvair station wagon backup light unit with hardware and bulbs unit is missing one lens and electrical wire chrome is in good condition and lens gaskets are in fair condition for 1961 New comes in original GM box. Only ONE available. First come, first serve!
This is a NOS Corvair backup light lamp unit for 1961 New comes with original hardware and bulbs in original GM box. Only ONE available. First come, first serve!
This is a NOS Station wagon back up lamp unit with bulbs original hardware and instruction sheet for 1962 New comes in original GM box. Only ONE available. First come, first serve!
This is a NOS Corvair w/4spd backup lamp adapter unit with original instruction sheet and hardware for 1961-62 New comes in original GM box. Only ONE available. First come, first serve!
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This is a used 1929 Chevrolet Front Bumper Assembly with Bracket. The bumper will fit all 1929 passenger cars & 1/2 ton trucks Bumper is complete with the three original diamond shaped medallions, end bolts, bumper brace and mounting clamps. Face bars are rusty but should be able to be chrome plated for restoration purposes. Sold AS IS. See photos. This item is oversize and special shipping charges will apply. Call or email us for a freight quote.
This is a Used Pair of 1931 Chevrolet Passenger Rear Double Bar Bumperettes. These are complete units except that one bumper is missing the center medallion. They come with mounting brackets and one center medallion. These will require complete restoration for a show car or used as is for a rat rod. See photos - Sold AS IS. Please call Steve at 800-841-6622 or 541-258-2114 for more detailed description of this item. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This appears to be an original early 1930's GM Double Bar FRONT Bumper & Bracket Assembly. The face bars are 1-7/8" tall as compared to original Chevrolet face bar height of 1-13/16" tall. THIS IS NOT a Chevrolet bumper. The bracket is in very good condition with only minor surface rust on the chrome. The bumper end bolts are correct and in good condition. The center bumper medallion is in very good condition. The chrome face bars are also in very good condition. Mounting hole bolt centers are 25". Overall length of this bumper is 63-1/2". This bumper may be off of an Oakland, Pontiac, Buick, Oldsmobile, La Salle or Cadillac of the era. Could also be used on a street rod. Call or email with questions. Sold AS IS. See photos. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS FRONT-OUTER bumper bracket for the left side. Fits all GA Master Deluxe passenger cars. Excellent condition-some surface rust. Only THREE available, so first come, first serve! GM# 594529
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS FRONT-OUTER bumper bracket for the LEFT side. Fits all 1942 passenger cars. Excellent condition-some surface rust. Only THREE available, so first come, first serve! GM# 3663889
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS FRONT-OUTER bumper bracket for the RIGHT side. Fits all 1942 passenger cars. Excellent condition-some surface rust. Only FIVE available, so first come, first serve! GM# 3663890
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS FRONT-INNER bumper bracket for the LEFT side. Fits 1941-46 trucks (exc. AN, BN, DS). Excellent condition-some surface rust. Only ONE available, so first come, first serve! GM# 3328013
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS FRONT-INNER bumper bracket for the LEFT side. Fits 1940 passenger cars. Excellent condition-some surface rust. Only ONE available, so first come, first serve! GM# 3653341
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS FRONT-INNER bumper bracket for the LEFT side. Fits 1941 passenger cars. Excellent condition-some surface rust. Only TWO available, so first come, first serve! GM# 607887
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS FRONT-INNER bumper bracket for the RIGHT side. Fits 1941 passenger cars. Excellent condition-some surface rust. Only ONE available, so first come, first serve! GM# 607888
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS REAR-OUTER bumper bracket for the RIGHT side. Fits 1941-1942 Coupe, Convertible, Sedan and SDL. Excellent condition-some surface rust. Only THREE available, so first come, first serve! GM# 3658336
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS FRONT-INNER bumper bracket for the RIGHT side. Fits 1942 passenger car. Excellent condition-some surface rust. Only FIVE available, so first come, first serve! GM# 3663888
This item came from a large collection of New Old Stock (NOS) items purchased from a Chevrolet dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS grille to bumper center filler panel for 1966 full-size Chevrolet cars. It is in pristine condition and ready to install. Only ONE available-first come, first serve! GM# 3869749
This is a set of NOS FRONT bumper guards for 1954 Chevrolet Utility (1-1/2 ton and larger). They are in pristine condition and ready to install. Original box with taped closed ends included. Only ONE pair available-first come, first serve! GM# 986978
This is a Used 1930 Roadster & Touring Dash. There is surface rust on the back side of the dash but no areas of rust out. There are some small extra holes that would need to be filled but this is a solid original part. See photos - Sold AS IS. Please call Steve at 800-841-6622 or 541-258-2114 for more detailed description of this dash. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Used 1931 Passenger Left Front Non-Welled Fender. The fender is in fair condition. It will need body work and paint but is a solid original part. There is surface rust on the bottom side of the fender but no areas of rust out. The top side has primer but appears to have some minor body work done on the outer edge. See photos - Sold AS IS. Please call Steve at 800-841-6622 or 541-258-2114 for more detailed description of this fender. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Used 1931 Passenger Left Front Non-Welled Fender. The fender is in very good condition. It appears that it may be NOS, The original paint is in very good condition but would require paint and minor body work for a show vehicle. Sold AS IS. Please call Steve at 800-841-6622 or 541-258-2114 for more detailed description of this fender. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This item came from a large collection of New Old Stock (NOS) items purchased recently from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions. This is a NOS FRONT fender tie bar for 1962 full-sized Chevrolet passenger cars. It is in pristine condition and ready to install. Only ONE available-first come, first serve! GM# 3795637
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This is an original 1931 Chevrolet Passenger Car Headlight Bar. This item has surface rust and a little pitting, but should be able to be chrome plated. There are no reproductions of this headlight bar available. This bar is missing the license plate clips. Sold AS IS. See photos. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This is an original 1929-1930 Hood Assembly - 4-Pieces. The hood will fit car & truck. This hood has a decent paint job on it, but is showing some tiny surface rust areas. It has good solid sheet metal - no rust out areas with minor damage to one or two of the louvers. See photos. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This is an original 1932 Chevrolet Passenger Radiator Shell. The shell has damage around each of the holes on the side for the headlight supports. The grille shell is solid but will need complete restoration and chrome plating. It has one long split next to the brace hole on the right side. Please look at the photos to determine the condition. This is the brass shell and lower trim only. The lower steel brace is missing and there is no mesh insert. It is being sold AS IS. NOTE: This shell is the same as 1933 Chevy trucks, but it is brass and trucks had a steel shell that was painted black. Call or email if you have questions and ask for Steve. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
The Chevrolet Casting Number Listing is a very helpful publication This booklet will help identify part numbers in the Chevrolet Master Parts Books that are not the same as the casting number on the part. It is a crossover list and very useful for interchange on these years.
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 Chevrolet Cars
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This is a NORS (New Old Replacement Stock) REAR Brake Cable for 1934-1935 Chevrolet Passenger cars. These cables are 35+ years old and there may be some slight surface rust which does not affect operation. 29-1/2" Overall Length. Cable is threaded on both ends - one male and one female end. Replaces GM# 378315 Specific Applications: 1934-1935 Chevrolet Passenger Cars - Standard & Master
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This is a NORS (New Old Replacement Stock) REAR Brake Cable for 1936 Master and All 1937 Chevrolet Passenger cars. These cables are 35+ years old and there may be some slight surface rust which does not affect operation. 31-1/2" Overall Length - with clamp. Replaces GM# 594308, 597326 Specific Applications: 1936 Master Passenger Cars; 1937 All Passenger Cars
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This is a NORS (New Old Replacement Stock) REAR Brake Cable for 1940 Chevrolet Passenger cars. These cables are 35+ years old and there may be some slight surface rust which does not affect operation. 76-1/4" Overall Length. Cable is threaded on end with clevis on one end. Replaces GM# 3654165, 3654208 Specific Applications: 1940 Chevrolet Passenger Cars - All Models, including Sedan Delivery
This is a NOS front wheel cylinder repair kit for 1949-1950 Chevrolet passenger car. It is in it's original unopened package. Delco Hydraulic Brake Service Part. Cups are 1-5/16" diameter. Only ONE available. GM# 5453709
Clock Description: Best backlit LED clock on the market 14 inches across Clear Lexan outer lens Plugs into any 110 outlet On / Off switch in cord Quartz movement runs from AA battery Perfect for the collector 1 year manufacturer warranty Made in the USA When was the last time you found a neon clock with a new design in it? Its been a long time. If youre tired of the same boring neon clocks that have been around for the last 30 years here is the solution from Collectable Sign and Clock, our new LED lighted clocks. These LED lighted clocks have a look and feel of the vintage clocks from the 1950s but all the modern technology from the 21st century. You will enjoy your new clock from Collectable Sign and Clock for years to come. The clock measures 14 inches across. The outer lens is made from high quality optical Lexan held in place with 3 removable rivets. It's scratch resistant and won't yellow over time. The advertisement face is cut out by a CNC router and the image is placed with a UV dried computer controlled printing process that will last for many years. The back of the clock is made from black ABS plastic that houses an LED light source with an on/off switch in the cord. The clock is a battery operated quartz movement that runs from 1 double AA battery. This sign is awesome when lit! This is a must for any collector and would look great in your home, office, or garage. Note: Flat Rate Shipping Charge for Continental USA = $17.00 each; AK & HI = $25.00; Canada = $39.00; Other Countries $69.00
Clock Description: Best backlit LED clock on the market 14 inches across Clear Lexan outer lens Plugs into any 110 outlet On / Off switch in cord Quartz movement runs from AA battery Perfect for the collector 1 year manufacturer warranty Made in the USA When was the last time you found a neon clock with a new design in it? Its been a long time. If youre tired of the same boring neon clocks that have been around for the last 30 years here is the solution from Collectable Sign and Clock, our new LED lighted clocks. These LED lighted clocks have a look and feel of the vintage clocks from the 1950s but all the modern technology from the 21st century. You will enjoy your new clock from Collectable Sign and Clock for years to come. The clock measures 14 inches across. The outer lens is made from high quality optical Lexan held in place with 3 removable rivets. It's scratch resistant and won't yellow over time. The advertisement face is cut out by a CNC router and the image is placed with a UV dried computer controlled printing process that will last for many years. The back of the clock is made from black ABS plastic that houses an LED light source with an on/off switch in the cord. The clock is a battery operated quartz movement that runs from 1 double AA battery. This sign is awesome when lit! This is a must for any collector and would look great in your home, office, or garage. Note: Flat Rate Shipping Charge for Continental USA = $17.00 each; AK & HI = $25.00; Canada = $39.00; Other Countries $69.00
Clock Description: Best backlit LED clock on the market 14 inches across Clear Lexan outer lens Plugs into any 110 outlet On / Off switch in cord Quartz movement runs from AA battery Perfect for the collector 1 year manufacturer warranty Made in the USA When was the last time you found a neon clock with a new design in it? Its been a long time. If youre tired of the same boring neon clocks that have been around for the last 30 years here is the solution from Collectable Sign and Clock, our new LED lighted clocks. These LED lighted clocks have a look and feel of the vintage clocks from the 1950s but all the modern technology from the 21st century. You will enjoy your new clock from Collectable Sign and Clock for years to come. The clock measures 14 inches across. The outer lens is made from high quality optical Lexan held in place with 3 removable rivets. It's scratch resistant and won't yellow over time. The advertisement face is cut out by a CNC router and the image is placed with a UV dried computer controlled printing process that will last for many years. The back of the clock is made from black ABS plastic that houses an LED light source with an on/off switch in the cord. The clock is a battery operated quartz movement that runs from 1 double AA battery. This sign is awesome when lit! This is a must for any collector and would look great in your home, office, or garage. Note: Flat Rate Shipping Charge for Continental USA = $17.00 each; AK & HI = $25.00; Canada = $39.00; Other Countries $69.00
Clock Description: Best backlit LED clock on the market 14 inches across Clear Lexan outer lens Plugs into any 110 outlet On / Off switch in cord Quartz movement runs from AA battery Perfect for the collector 1 year manufacturer warranty Made in the USA When was the last time you found a neon clock with a new design in it? Its been a long time. If youre tired of the same boring neon clocks that have been around for the last 30 years here is the solution from Collectable Sign and Clock, our new LED lighted clocks. These LED lighted clocks have a look and feel of the vintage clocks from the 1950s but all the modern technology from the 21st century. You will enjoy your new clock from Collectable Sign and Clock for years to come. The clock measures 14 inches across. The outer lens is made from high quality optical Lexan held in place with 3 removable rivets. It's scratch resistant and won't yellow over time. The advertisement face is cut out by a CNC router and the image is placed with a UV dried computer controlled printing process that will last for many years. The back of the clock is made from black ABS plastic that houses an LED light source with an on/off switch in the cord. The clock is a battery operated quartz movement that runs from 1 double AA battery. This sign is awesome when lit! This is a must for any collector and would look great in your home, office, or garage. Note: Flat Rate Shipping Charge for Continental USA = $17.00 each; AK & HI = $25.00; Canada = $39.00; Other Countries $69.00
This is a Clutch Throw Out Bearing Plate for 1934-1937 Chevrolet cars & trucks 1934 trucks only (Some trucks in this year used 836632 - compare thickness to your original) This plate fits into the three fingers of the pressure plate. It is often worn on the face or where the fingers meet the sleeve. Thickness is 1-1/8". This is a NOS or NORS replacement part - limited supply, subject to stock on hand. Replaces GM# 837477 Specific Applications: 1934-1937 All cars & trucks (exc 1934 Standard)
1946-50 Mounting cushion, hydraulic pump. Used on models with hydraulic convertible top. Two (2) to three (3) required per car. Replaces #4149788. Convertibles only.
Cements to original metal core. One or two pair per car required as follows: 1941-48: Top of folding pillar into groove roof rail - rear. 1941-52: Folding post rest on female post rest on female hinge of folding top.
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars
1953-57 Bumper, folding top, side roof rail slat iron. Replaces #4615046. Steel core as original. Two (2) or four (4) per car as required for front and center. All convertibles
1950 Bumper/Cap, Convertible Folding Pillar to Side Roof Rail Link. Excellent copy made out of gray rubber. Replaces #4662358. Four (4) piece set only. A faithful copy of the original part. Made in the USA by Steele Rubber Products, Inc.
1951-75 Grommet, folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Replaces #3698109. Four (4) needed per car for all convertibles
1932-1935 Roadster & Phaeton Windshield Header Seal (May fit 1931 also) Fine grain sponge rubber. A replacement seal, this is sold by the foot. Fits Roadster & Phaeton convertible tops only. NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
This is the side roof rail weather strip for 1933-1941 Chevrolet Convertibles. Will other GM Makes like Buick, Cadillac, Pontiac, Oldsmobile, Oakland & Durant. It fits into metal channel retainer. See 70-1172 for cloth covering. This is the original type roof rail weather strip used on all GM convertibles for these years. NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 Chevrolet Cars
1931-1932 Front Bow Seal Weatherstrip, windshield header-to-front-roof rail. Fine grain sponge rubber. A replacement seal, requires minor trimming to install. Replaces #4009225. Cabriolets and Landau Phaetons - Styles 568 and 571. NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
This convertible top rubber seal is used on 1931-1932 Chevrolet Cabriolet & Landau Phaeton models. It is a dense rubber located around the upper window openings to seal against the door window when it is raised. The "T" shaped rubber replaces the original, however, it does NOT have a metal core. The original pieces had metal core insert so it could be screwed in place. Sold by the foot, as needed. Probably used on other GM makes from 1930-1932. NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
This convertible top to front bow seal fits all 1955-1957 Chevrolet convertibles. Fits the front bow to windshield, rear center section. Top quality sponge as original. Approximately forty six (46) inch strip for one car. Replaces GM# 4211195.
This is the convertible top front bow-to-windshield outer seal that fits all 1955-1957 Chevrolet Convertibles. Extruded section of exact profile. Approximately four (4) foot nine (9) inches long. One (1) strip per car. Replaces GM# 4650077
1955-57 Filler, side roof rail. Front corner just in front of flipper seal. Replaces #4659971-72. Right and left. Solid brass core with molded screw holes. Sport Coupes.
1940-52 Weatherstrip, front bow-to-windshield, outer. Correct style to be attached to your original metal strip. Replaces #4563765 & 4563766 and other #s. (The metal strips changed in 49 but the rubber cross-section remained the same.) Approx. 4 ft-10 in long. All convertibles.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars
1941-48 Rubber fillers, side roof rail to front roof rail at front corners. Right and left. Replaces #4115405-6. Metal core, threaded for original screws. Convertible coupes.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1936 Seal, convertible top front bow-to-windshield with integral end pads. Made to fit Cadillac convertibles but can be adapted to other GM convertibles.